As a general question why would you replace a 3550 with a 500? Is the
3550 failing or are you trying out the 500 switch?  

 

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of James Grace
Sent: Thursday, February 16, 2006 4:45 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] is there to config "allow vlan 10,20,30,40 on
cat500

 

We have the cat exp 500 and it confusing to config  when you try to
match it to the cat 3550  you are replacing.  One of our ports on the
3550 is for an AP with multiple vlans 

 

Int fa  0/23 

Switchport access vl 30 

Switchport trunk enc dot1q

Switchport trunk allowed vl 10,20,80

Switchport mode trunk 

 

How do I make this happen on a cat exp 500,  Will the ap role
automatically allow this 

 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

Attachment:
This has been downloaded 0 time(s).

[ Post a follow-up to this message ]