We're looking for an on-phone solution that will give us busy lamp field -
like functionality for 10+ lines, preferably without adding 7914's. The only
product i've seen that actually seems to do this is ANDTek Group
(www.andtek.com),
I was wondering if anyone had any experiences with this vendor good or bad?
I've seen them at CIPTUG and I think at Networkers as well. If this works as
advertised, I could see us using it even with CCM5 for people that need to
monitor alot of lines.. would save us from having to attach 7914's to them,
could pay for itself right there.

I'd like to just put attendant console on these people's PCs but we've never
been successful getting people to accept that solution.

I hear that BLF's are in ccm 5, but i'm assuming they will still take up
line buttons, and i'd like to have a feature like this available for us this
summer for a large conversion from an old mini-PBX. I'm not gonna be brave
enough to load ccm5 that soon after release 

Thanks!
--
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations

Attachment:
This has been downloaded 0 time(s).

[ Post a follow-up to this message ]

The other option would be to take a look at a company called Litescape

There product is called oncast and is very customizable.

Http://litescape.com





Ed Leatherman <ealeatherman@gmail.com>
Sent by: cisco-voip-bounces@puck.nether.net
02/17/2006 02:02 PM


To:     cisco-voip@puck.nether.net
cc:
Subject:        [cisco-voip] ANDTek product question


We're looking for an on-phone solution that will give us busy lamp field -
like functionality for 10+ lines, preferably without adding 7914's. The
only product i've seen that actually seems to do this is ANDTek Group (www.andtek.
com), I was wondering if anyone had any experiences with this vendor good or
bad? I've seen them at CIPTUG and I think at Networkers as well. If this
works as advertised, I could see us using it even with CCM5 for people
that need to monitor alot of lines.. would save us from having to attach
7914's to them, could pay for itself right there.

I'd like to just put attendant console on these people's PCs but we've
never been successful getting people to accept that solution.

I hear that BLF's are in ccm 5, but i'm assuming they will still take up
line buttons, and i'd like to have a feature like this available for us
this summer for a large conversion from an old mini-PBX. I'm not gonna be
brave enough to load ccm5 that soon after release 

Thanks!
--
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations __________________________________
_____________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

Attachment:
This has been downloaded 0 time(s).

[ Post a follow-up to this message ]