 |
|
 |
|
|
 |
SRST and MGCP fallback to H323 |
 |
 |
|
|
03-24-06 01:47 AM
Hi,
I'm having some troubles configuring these functionalities. SRST is
working properly but MGCP fallback it is not.
When the gateway looses connectivity with the CCM manager, it seems it
doesn't default to H323. If I do a show isdn status I get the following:
Global ISDN Switchtype = basic-net3
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 6. Layer 3 output may
not apply
ISDN BRI0/3/0 interface
dsl 6, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 6 CCBs = 0
The Free Channel Mask: 0x80000003
So, I assume the BRI is still controlled by the CCM and logically is
down...
Any idea why this isn't working??? This is my first configuration of
this functionality so it can also be a configuration error...
This is my config:
Building configuration...
Current configuration : 2809 bytes
!
version 12.4
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging buffered 500000 debugging
no logging console
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 3
network-clock-select 1 BRI0/3/0
ip subnet-zero
!
!
ip cef
!
!
isdn switch-type basic-net3
!
voice-card 0
no dspfarm
!
!
!
!
voice class codec 10
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 4 g729r8
!
!
!
!
!
!
!
!
!
voice translation-rule 1
rule 1 /934677367/ /6000/
!
!
voice translation-profile digitstrip
translate called 1
!
!
!
application
global
service alternate DEFAULT
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
ip address 192.168.10.100 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn network-failure-cause 34
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
!
interface BRI0/3/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface Service-Engine1/0
no ip address
shutdown
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/3/0
translation-profile incoming digitstrip
compand-type a-law
cptone ES
!
voice-port 0/3/1
!
ccm-manager fallback-mgcp
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.1.16.2
ccm-manager config
!
mgcp
mgcp call-agent 10.1.16.2 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
!
mgcp profile default
!
!
!
dial-peer voice 10 pots
service mgcpapp
destination-pattern 0.T
direct-inward-dial
port 0/3/0
!
!
!
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
user-locale ES
timeouts interdigit 3
ip source-address 192.168.10.100 port 2000
max-ephones 48
max-dn 48 dual-line
transfer-pattern 6...
transfer-pattern .T
moh SampleAudioSource.alaw.wav
date-format dd-mm-yy
!
!
line con 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
login
!
scheduler allocate 20000 1000
!
end
Regards,
Ruben
 Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
 |
|
 |
|
 |
|
|
|
Re: SRST and MGCP fallback to H323 |
|
|
|
|
03-24-06 01:47 AM
>From the first look , configuration Ok.
But I can assume that default application can be case sensitive/
So type
Sh call application sum
And type exactly how it looks, try.
š
-----------------------
Sincerely Yours,
Konstantin Fedorov
_____
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Ruben Montes (EU)
Sent: Thursday, March 23, 2006 8:15 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] SRST and MGCP fallback to H323
Hi,
I'm having some troubles configuring these functionalities. SRST is working
properly but MGCP fallback it is not.
When the gateway looses connectivity with the CCM manager, it seems it doesn
't default to H323. If I do a show isdn status I get the following:
Global ISDN Switchtype = basic-net3
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 6. Layer 3 output may not
apply
ISDN BRI0/3/0 interface
dsl 6, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 6 CCBs = 0
The Free Channel Mask: 0x80000003
So, I assume the BRI is still controlled by the CCM and logically is down...
Any idea why this isn't working??? This is my first configuration of this fu
nctionality so it can also be a configuration error...
This is my config:
Building configuration...
Current configuration : 2809 bytes
!
version 12.4
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging buffered 500000 debugging
no logging console
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 3
network-clock-select 1 BRI0/3/0
ip subnet-zero
!
!
ip cef
!
!
isdn switch-type basic-net3
!
voice-card 0
no dspfarm
!
!
!
!
voice class codec 10
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 4 g729r8
!
!
!
!
!
!
!
!
!
voice translation-rule 1
rule 1 /934677367/ /6000/
!
!
voice translation-profile digitstrip
translate called 1
!
!
!
application
global
service alternate DEFAULT
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
ip address 192.168.10.100 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn network-failure-cause 34
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
!
interface BRI0/3/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface Service-Engine1/0
no ip address
shutdown
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/3/0
translation-profile incoming digitstrip
compand-type a-law
cptone ES
!
voice-port 0/3/1
!
ccm-manager fallback-mgcp
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.1.16.2
ccm-manager config
!
mgcp
mgcp call-agent 10.1.16.2 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
!
mgcp profile default
!
!
!
dial-peer voice 10 pots
service mgcpapp
destination-pattern 0.T
direct-inward-dial
port 0/3/0
!
!
!
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
user-locale ES
timeouts interdigit 3
ip source-address 192.168.10.100 port 2000
max-ephones 48
max-dn 48 dual-line
transfer-pattern 6...
transfer-pattern .T
moh SampleAudioSource.alaw.wav
date-format dd-mm-yy
!
!
line con 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
login
!
scheduler allocate 20000 1000
!
end
Regards,
Ruben
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: SRST and MGCP fallback to H323 |
|
|
|
|
03-24-06 01:47 AM
I guess I should select the correct e-mail !! :-)
Where is the command "call application alternate default" or "service defaul
t"
Brian
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Fedorov, Konstantin
Sent: Thu 3/23/2006 5:16 PM
To: Ruben Montes (EU); cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] SRST and MGCP fallback to H323
>From the first look , configuration Ok.
But I can assume that default application can be case sensitive/
So type
Sh call application sum
And type exactly how it looks, try.
-----------------------
Sincerely Yours,
Konstantin Fedorov
________________________________
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Ruben Montes (EU)
Sent: Thursday, March 23, 2006 8:15 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] SRST and MGCP fallback to H323
Hi,
I'm having some troubles configuring these functionalities. SRST is working
properly but MGCP fallback it is not.
When the gateway looses connectivity with the CCM manager, it seems it doesn
't default to H323. If I do a show isdn status I get the following:
Global ISDN Switchtype = basic-net3
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 6. Layer 3 output may not
apply
ISDN BRI0/3/0 interface
dsl 6, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 6 CCBs = 0
The Free Channel Mask: 0x80000003
So, I assume the BRI is still controlled by the CCM and logically is down...
Any idea why this isn't working??? This is my first configuration of this fu
nctionality so it can also be a configuration error...
This is my config:
Building configuration...
Current configuration : 2809 bytes
!
version 12.4
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging buffered 500000 debugging
no logging console
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 3
network-clock-select 1 BRI0/3/0
ip subnet-zero
!
!
ip cef
!
!
isdn switch-type basic-net3
!
voice-card 0
no dspfarm
!
!
!
!
voice class codec 10
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 4 g729r8
!
!
!
!
!
!
!
!
!
voice translation-rule 1
rule 1 /934677367/ /6000/
!
!
voice translation-profile digitstrip
translate called 1
!
!
!
application
global
service alternate DEFAULT
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
ip address 192.168.10.100 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn network-failure-cause 34
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
!
interface BRI0/3/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface Service-Engine1/0
no ip address
shutdown
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/3/0
translation-profile incoming digitstrip
compand-type a-law
cptone ES
!
voice-port 0/3/1
!
ccm-manager fallback-mgcp
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.1.16.2
ccm-manager config
!
mgcp
mgcp call-agent 10.1.16.2 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
!
mgcp profile default
!
!
!
dial-peer voice 10 pots
service mgcpapp
destination-pattern 0.T
direct-inward-dial
port 0/3/0
!
!
!
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
user-locale ES
timeouts interdigit 3
ip source-address 192.168.10.100 port 2000
max-ephones 48
max-dn 48 dual-line
transfer-pattern 6...
transfer-pattern .T
moh SampleAudioSource.alaw.wav
date-format dd-mm-yy
!
!
line con 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
login
!
scheduler allocate 20000 1000
!
end
Regards,
Ruben
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: SRST and MGCP fallback to H323 |
|
|
|
|
03-25-06 02:46 PM
Hi,
application
global
service alternate DEFAULT
This is new style command.
-----------------------
Sincerely Yours,
Konstantin Fedorov
_____
From: Brian Henry [mailto:Brian.Henry@apptis.com]
Sent: Friday, March 24, 2006 4:44 AM
To: Fedorov, Konstantin; Ruben Montes (EU); cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] SRST and MGCP fallback to H323
I guess I should select the correct e-mail !! :-)
Where is the command "call application alternate default" or "service
default"
Brian
_____
From: cisco-voip-bounces@puck.nether.net on behalf of Fedorov,
Konstantin
Sent: Thu 3/23/2006 5:16 PM
To: Ruben Montes (EU); cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] SRST and MGCP fallback to H323
>From the first look , configuration Ok.
But I can assume that default application can be case sensitive/
So type
Sh call application sum
And type exactly how it looks, try.
-----------------------
Sincerely Yours,
Konstantin Fedorov
_____
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ruben Montes
(EU)
Sent: Thursday, March 23, 2006 8:15 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] SRST and MGCP fallback to H323
Hi,
I'm having some troubles configuring these functionalities. SRST is
working properly but MGCP fallback it is not.
When the gateway looses connectivity with the CCM manager, it seems it
doesn't default to H323. If I do a show isdn status I get the following:
Global ISDN Switchtype = basic-net3
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 6. Layer 3 output may
not apply
ISDN BRI0/3/0 interface
dsl 6, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 6 CCBs = 0
The Free Channel Mask: 0x80000003
So, I assume the BRI is still controlled by the CCM and logically is
down...
Any idea why this isn't working??? This is my first configuration of
this functionality so it can also be a configuration error...
This is my config:
Building configuration...
Current configuration : 2809 bytes
!
version 12.4
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging buffered 500000 debugging
no logging console
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 3
network-clock-select 1 BRI0/3/0
ip subnet-zero
!
!
ip cef
!
!
isdn switch-type basic-net3
!
voice-card 0
no dspfarm
!
!
!
!
voice class codec 10
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 4 g729r8
!
!
!
!
!
!
!
!
!
voice translation-rule 1
rule 1 /934677367/ /6000/
!
!
voice translation-profile digitstrip
translate called 1
!
!
!
application
global
service alternate DEFAULT
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
ip address 192.168.10.100 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn network-failure-cause 34
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
!
interface BRI0/3/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface Service-Engine1/0
no ip address
shutdown
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/3/0
translation-profile incoming digitstrip
compand-type a-law
cptone ES
!
voice-port 0/3/1
!
ccm-manager fallback-mgcp
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.1.16.2
ccm-manager config
!
mgcp
mgcp call-agent 10.1.16.2 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
!
mgcp profile default
!
!
!
dial-peer voice 10 pots
service mgcpapp
destination-pattern 0.T
direct-inward-dial
port 0/3/0
!
!
!
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
user-locale ES
timeouts interdigit 3
ip source-address 192.168.10.100 port 2000
max-ephones 48
max-dn 48 dual-line
transfer-pattern 6...
transfer-pattern .T
moh SampleAudioSource.alaw.wav
date-format dd-mm-yy
!
!
line con 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
login
!
scheduler allocate 20000 1000
!
end
Regards,
Ruben
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: SRST and MGCP fallback to H323 |
|
|
|
|
03-25-06 02:46 PM
Hi,
I have chaged the application statement to this:
application
global
service alternate Default
But the result is the same: it seems the isdn never fallbacks to H323...
Can anybody share a working config? This is pretty simple but I can't
manage to have it working...
Regards,
Ruben
________________________________
De: Fedorov, Konstantin [mailto:kfedor@amt.ru]
Enviado el: viernes, 24 de marzo de 2006 10:53
Para: Brian Henry; Ruben Montes (EU); cisco-voip@puck.nether.net
Asunto: RE: [cisco-voip] SRST and MGCP fallback to H323
Hi,
application
global
service alternate DEFAULT
This is new style command.
-----------------------
Sincerely Yours,
Konstantin Fedorov
________________________________
From: Brian Henry [mailto:Brian.Henry@apptis.com]
Sent: Friday, March 24, 2006 4:44 AM
To: Fedorov, Konstantin; Ruben Montes (EU); cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] SRST and MGCP fallback to H323
I guess I should select the correct e-mail !! :-)
Where is the command "call application alternate default" or "service
default"
Brian
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Fedorov,
Konstantin
Sent: Thu 3/23/2006 5:16 PM
To: Ruben Montes (EU); cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] SRST and MGCP fallback to H323
>From the first look , configuration Ok.
But I can assume that default application can be case sensitive/
So type
Sh call application sum
And type exactly how it looks, try.
-----------------------
Sincerely Yours,
Konstantin Fedorov
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ruben Montes
(EU)
Sent: Thursday, March 23, 2006 8:15 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] SRST and MGCP fallback to H323
Hi,
I'm having some troubles configuring these functionalities. SRST is
working properly but MGCP fallback it is not.
When the gateway looses connectivity with the CCM manager, it seems it
doesn't default to H323. If I do a show isdn status I get the following:
Global ISDN Switchtype = basic-net3
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 6. Layer 3 output may
not apply
ISDN BRI0/3/0 interface
dsl 6, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 6 CCBs = 0
The Free Channel Mask: 0x80000003
So, I assume the BRI is still controlled by the CCM and logically is
down...
Any idea why this isn't working??? This is my first configuration of
this functionality so it can also be a configuration error...
This is my config:
Building configuration...
Current configuration : 2809 bytes
!
version 12.4
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging buffered 500000 debugging
no logging console
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 3
network-clock-select 1 BRI0/3/0
ip subnet-zero
!
!
ip cef
!
!
isdn switch-type basic-net3
!
voice-card 0
no dspfarm
!
!
!
!
voice class codec 10
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 4 g729r8
!
!
!
!
!
!
!
!
!
voice translation-rule 1
rule 1 /934677367/ /6000/
!
!
voice translation-profile digitstrip
translate called 1
!
!
!
application
global
service alternate DEFAULT
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
ip address 192.168.10.100 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn network-failure-cause 34
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
!
interface BRI0/3/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface Service-Engine1/0
no ip address
shutdown
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/3/0
translation-profile incoming digitstrip
compand-type a-law
cptone ES
!
voice-port 0/3/1
!
ccm-manager fallback-mgcp
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.1.16.2
ccm-manager config
!
mgcp
mgcp call-agent 10.1.16.2 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
!
mgcp profile default
!
!
!
dial-peer voice 10 pots
service mgcpapp
destination-pattern 0.T
direct-inward-dial
port 0/3/0
!
!
!
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
user-locale ES
timeouts interdigit 3
ip source-address 192.168.10.100 port 2000
max-ephones 48
max-dn 48 dual-line
transfer-pattern 6...
transfer-pattern .T
moh SampleAudioSource.alaw.wav
date-format dd-mm-yy
!
!
line con 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
login
!
scheduler allocate 20000 1000
!
end
Regards,
Ruben
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: SRST and MGCP fallback to H323 |
|
|
|
|
03-25-06 02:46 PM
The two ways you can do it would be
call application alternate
or
service default
This explains what you have to put in and what is understood as the default
if no statement is put in, so it depends if you want to do extra typing.
Also where is you incoming-called number . at under your dial-peer. I know t
his does not help in getting your BRI to register during failover but at lea
st for incoming calls it will use your dial-peer and not dp 0.
SUMMARY STEPS
1. <http://www.cisco.com/univercd/illus/images/blank.gif> enable
2. <http://www.cisco.com/univercd/illus/images/blank.gif> configure termina
l
3. <http://www.cisco.com/univercd/illus/images/blank.gif> ccm-manager fallb
ack-mgcp
4. <http://www.cisco.com/univercd/illus/images/blank.gif> call application
alternate [application-name]
or
service [alternate | default] service-name location
5. <http://www.cisco.com/univercd/illus/images/blank.gif> exit
DETAILED STEPS
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
* <http://www.cisco.com/univercd/illus/images/blank.gif> Enter your password
when prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ccm-manager fallback-mgcp
Example:
Router(config)# ccm-manager fallback-mgcp
Enables the gateway fallback feature and allows an MGCP voice gateway to pro
vide call processing services through SRST or other configured applications
when cisco Unified CallManager is unavailable.
Step 4
call application alternate [application-name]
or
service [alternate | default] service-name location
Example:
Router(config)# call application alternate
or
Router(config)# service default
The call application alternate command specifies that the default voice appl
ication takes over if the MGCP application is not available. The application
-name argument is optional and indicates the name of the specific voice appl
ication to use if the application in the dial peer fails. If a specific appl
ication name is not entered, the gateway uses the DEFAULT application.
Or
The service command loads and configures a specific, standalone application
on a dial peer. The keywords and arguments are as follows:
* <http://www.cisco.com/univercd/illus/images/blank.gif> alternate-Optional.
Alternate service to use if the service that is configured on the dial peer
fails.
* <http://www.cisco.com/univercd/illus/images/blank.gif> default-Optional. S
pecifies that the default service ("DEFAULT") on the dial peer is used if th
e alternate service fails.
* <http://www.cisco.com/univercd/illus/images/blank.gif> service-name-Name t
hat identifies the voice application.
* <http://www.cisco.com/univercd/illus/images/blank.gif> location-Directory and filenam
e of the Tcl script or VoiceXML document in URL format. For example, flash memory (flas
h:filename), a TFTP (tftp://../filename) or an HTTP server ([url]http://../filename[/ur
l]) are valid locations
Step 5
exit
Example:
Router(config)# exit
Exits global configuration mode and returns to privileged EXEC mode
Brian
________________________________
From: Fedorov, Konstantin [mailto:kfedor@amt.ru]
Sent: Fri 3/24/2006 4:53 AM
To: Brian Henry; Ruben Montes (EU); cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] SRST and MGCP fallback to H323
Hi,
application
global
service alternate DEFAULT
This is new style command.
-----------------------
Sincerely Yours,
Konstantin Fedorov
________________________________
From: Brian Henry [mailto:Brian.Henry@apptis.com]
Sent: Friday, March 24, 2006 4:44 AM
To: Fedorov, Konstantin; Ruben Montes (EU); cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] SRST and MGCP fallback to H323
I guess I should select the correct e-mail !! :-)
Where is the command "call application alternate default" or "service defaul
t"
Brian
________________________________
From: cisco-voip-bounces@puck.nether.net on behalf of Fedorov, Konstantin
Sent: Thu 3/23/2006 5:16 PM
To: Ruben Montes (EU); cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] SRST and MGCP fallback to H323
>From the first look , configuration Ok.
But I can assume that default application can be case sensitive/
So type
Sh call application sum
And type exactly how it looks, try.
-----------------------
Sincerely Yours,
Konstantin Fedorov
________________________________
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Ruben Montes (EU)
Sent: Thursday, March 23, 2006 8:15 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] SRST and MGCP fallback to H323
Hi,
I'm having some troubles configuring these functionalities. SRST is working
properly but MGCP fallback it is not.
When the gateway looses connectivity with the CCM manager, it seems it doesn
't default to H323. If I do a show isdn status I get the following:
Global ISDN Switchtype = basic-net3
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 6. Layer 3 output may not
apply
ISDN BRI0/3/0 interface
dsl 6, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 6 CCBs = 0
The Free Channel Mask: 0x80000003
So, I assume the BRI is still controlled by the CCM and logically is down...
Any idea why this isn't working??? This is my first configuration of this fu
nctionality so it can also be a configuration error...
This is my config:
Building configuration...
Current configuration : 2809 bytes
!
version 12.4
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging buffered 500000 debugging
no logging console
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 3
network-clock-select 1 BRI0/3/0
ip subnet-zero
!
!
ip cef
!
!
isdn switch-type basic-net3
!
voice-card 0
no dspfarm
!
!
!
!
voice class codec 10
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 4 g729r8
!
!
!
!
!
!
!
!
!
voice translation-rule 1
rule 1 /934677367/ /6000/
!
!
voice translation-profile digitstrip
translate called 1
!
!
!
application
global
service alternate DEFAULT
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
ip address 192.168.10.100 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn network-failure-cause 34
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
!
interface BRI0/3/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface Service-Engine1/0
no ip address
shutdown
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/3/0
translation-profile incoming digitstrip
compand-type a-law
cptone ES
!
voice-port 0/3/1
!
ccm-manager fallback-mgcp
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.1.16.2
ccm-manager config
!
mgcp
mgcp call-agent 10.1.16.2 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
!
mgcp profile default
!
!
!
dial-peer voice 10 pots
service mgcpapp
destination-pattern 0.T
direct-inward-dial
port 0/3/0
!
!
!
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
user-locale ES
timeouts interdigit 3
ip source-address 192.168.10.100 port 2000
max-ephones 48
max-dn 48 dual-line
transfer-pattern 6...
transfer-pattern .T
moh SampleAudioSource.alaw.wav
date-format dd-mm-yy
!
!
line con 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
login
!
scheduler allocate 20000 1000
!
end
Regards,
Ruben
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: SRST and MGCP fallback to H323 |
|
|
|
|
03-25-06 02:46 PM
Send this command befor fallback and after
sh ccm-manager fallback-mgcp all
And look at the log. Do you see there any error messages ??
-----------------------
Sincerely Yours,
Konstantin Fedorov
_____
From: Ruben Montes (EU) [mailto:Ruben.Montes@eu.didata.com]
Sent: Friday, March 24, 2006 1:01 PM
To: Fedorov, Konstantin; Brian Henry; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] SRST and MGCP fallback to H323
Hi,
I have chaged the application statement to this:
application
global
service alternate Default
But the result is the same: it seems the isdn never fallbacks to H323...
Can anybody share a working config? This is pretty simple but I can't
manage to have it working...
Regards,
Ruben
_____
De: Fedorov, Konstantin [mailto:kfedor@amt.ru]
Enviado el: viernes, 24 de marzo de 2006 10:53
Para: Brian Henry; Ruben Montes (EU); cisco-voip@puck.nether.net
Asunto: RE: [cisco-voip] SRST and MGCP fallback to H323
Hi,
application
global
service alternate DEFAULT
This is new style command.
-----------------------
Sincerely Yours,
Konstantin Fedorov
_____
From: Brian Henry [mailto:Brian.Henry@apptis.com]
Sent: Friday, March 24, 2006 4:44 AM
To: Fedorov, Konstantin; Ruben Montes (EU); cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] SRST and MGCP fallback to H323
I guess I should select the correct e-mail !! :-)
Where is the command "call application alternate default" or "service
default"
Brian
_____
From: cisco-voip-bounces@puck.nether.net on behalf of Fedorov,
Konstantin
Sent: Thu 3/23/2006 5:16 PM
To: Ruben Montes (EU); cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] SRST and MGCP fallback to H323
>From the first look , configuration Ok.
But I can assume that default application can be case sensitive/
So type
Sh call application sum
And type exactly how it looks, try.
-----------------------
Sincerely Yours,
Konstantin Fedorov
_____
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ruben Montes
(EU)
Sent: Thursday, March 23, 2006 8:15 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] SRST and MGCP fallback to H323
Hi,
I'm having some troubles configuring these functionalities. SRST is
working properly but MGCP fallback it is not.
When the gateway looses connectivity with the CCM manager, it seems it
doesn't default to H323. If I do a show isdn status I get the following:
Global ISDN Switchtype = basic-net3
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 6. Layer 3 output may
not apply
ISDN BRI0/3/0 interface
dsl 6, interface ISDN Switchtype = basic-net3
L2 Protocol = Q.921 0x0000 L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1 Status:
ACTIVE
Layer 2 Status:
Layer 2 NOT Activated
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 6 CCBs = 0
The Free Channel Mask: 0x80000003
So, I assume the BRI is still controlled by the CCM and logically is
down...
Any idea why this isn't working??? This is my first configuration of
this functionality so it can also be a configuration error...
This is my config:
Building configuration...
Current configuration : 2809 bytes
!
version 12.4
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
logging buffered 500000 debugging
no logging console
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 3
network-clock-select 1 BRI0/3/0
ip subnet-zero
!
!
ip cef
!
!
isdn switch-type basic-net3
!
voice-card 0
no dspfarm
!
!
!
!
voice class codec 10
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 4 g729r8
!
!
!
!
!
!
!
!
!
voice translation-rule 1
rule 1 /934677367/ /6000/
!
!
voice translation-profile digitstrip
translate called 1
!
!
!
application
global
service alternate DEFAULT
!
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
ip address 192.168.10.100 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn network-failure-cause 34
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
!
interface BRI0/3/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
!
interface Service-Engine1/0
no ip address
shutdown
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/3/0
translation-profile incoming digitstrip
compand-type a-law
cptone ES
!
voice-port 0/3/1
!
ccm-manager fallback-mgcp
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.1.16.2
ccm-manager config
!
mgcp
mgcp call-agent 10.1.16.2 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
!
mgcp profile default
!
!
!
dial-peer voice 10 pots
service mgcpapp
destination-pattern 0.T
direct-inward-dial
port 0/3/0
!
!
!
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
user-locale ES
timeouts interdigit 3
ip source-address 192.168.10.100 port 2000
max-ephones 48
max-dn 48 dual-line
transfer-pattern 6...
transfer-pattern .T
moh SampleAudioSource.alaw.wav
date-format dd-mm-yy
!
!
line con 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
login
!
scheduler allocate 20000 1000
!
end
Regards,
Ruben
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: SRST and MGCP fallback to H323 |
|
|
|
|
03-25-06 02:46 PM
How are you testing fallback?
Are you pulling all WAN/LAN connections from the
router that have a way back to CCM? Putting a
Access-list in, blackhole route, etc? ACLs do not stop
traffic generated by the router locally if you are
using an ACL.
--- "Ruben Montes (EU)" <Ruben.Montes@eu.didata.com>
wrote:
> Hi,
>
>
>
> I have chaged the application statement to this:
>
>
>
> application
>
> global
>
> service alternate Default
>
>
>
> But the result is the same: it seems the isdn never
> fallbacks to H323...
> Can anybody share a working config? This is pretty
> simple but I can't
> manage to have it working...
>
>
>
> Regards,
>
>
>
> Ruben
>
>
>
> ________________________________
>
> De: Fedorov, Konstantin [mailto:kfedor@amt.ru]
> Enviado el: viernes, 24 de marzo de 2006 10:53
> Para: Brian Henry; Ruben Montes (EU);
> cisco-voip@puck.nether.net
> Asunto: RE: [cisco-voip] SRST and MGCP fallback to
> H323
>
>
>
> Hi,
>
>
>
> application
>
> global
>
> service alternate DEFAULT
>
>
>
>
>
> This is new style command.
>
> -----------------------
> Sincerely Yours,
> Konstantin Fedorov
>
> ________________________________
>
> From: Brian Henry [mailto:Brian.Henry@apptis.com]
> Sent: Friday, March 24, 2006 4:44 AM
> To: Fedorov, Konstantin; Ruben Montes (EU);
> cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] SRST and MGCP fallback to
> H323
>
>
>
> I guess I should select the correct e-mail !! :-)
>
>
>
>
>
> Where is the command "call application alternate
> default" or "service
> default"
>
>
>
> Brian
>
> ________________________________
>
> From: cisco-voip-bounces@puck.nether.net on behalf
> of Fedorov,
> Konstantin
> Sent: Thu 3/23/2006 5:16 PM
> To: Ruben Montes (EU); cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] SRST and MGCP fallback to
> H323
>
>
>
>
> But I can assume that default application can be
> case sensitive/
>
> So type
>
> Sh call application sum
>
>
>
> And type exactly how it looks, try.
>
>
>
> -----------------------
> Sincerely Yours,
> Konstantin Fedorov
>
> ________________________________
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On
> Behalf Of Ruben Montes
> (EU)
> Sent: Thursday, March 23, 2006 8:15 PM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] SRST and MGCP fallback to H323
>
>
>
> Hi,
>
>
>
> I'm having some troubles configuring these
> functionalities. SRST is
> working properly but MGCP fallback it is not.
>
> When the gateway looses connectivity with the CCM
> manager, it seems it
> doesn't default to H323. If I do a show isdn status
> I get the following:
>
>
>
> Global ISDN Switchtype = basic-net3
>
>
>
> %Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 6.
> Layer 3 output may
> not apply
>
>
>
> ISDN BRI0/3/0 interface
>
> dsl 6, interface ISDN Switchtype =
> basic-net3
>
> L2 Protocol = Q.921 0x0000 L3 Protocol(s) =
> CCM MANAGER 0x0003
>
> Layer 1 Status:
>
> ACTIVE
>
> Layer 2 Status:
>
> Layer 2 NOT Activated
>
> Layer 3 Status:
>
> 0 Active Layer 3 Call(s)
>
> Active dsl 6 CCBs = 0
>
> The Free Channel Mask: 0x80000003
>
>
>
> So, I assume the BRI is still controlled by the CCM
> and logically is
> down...
>
>
>
> Any idea why this isn't working??? This is my first
> configuration of
> this functionality so it can also be a configuration
> error...
>
>
>
> This is my config:
>
>
>
> Building configuration...
>
>
>
> Current configuration : 2809 bytes
>
> !
>
> version 12.4
>
> service config
>
> service timestamps debug datetime msec
>
> service timestamps log datetime msec
>
> no service password-encryption
>
> !
>
> hostname Router
>
> !
>
> boot-start-marker
>
> boot-end-marker
>
> !
>
> logging buffered 500000 debugging
>
> no logging console
>
> !
>
> no aaa new-model
>
> !
>
> resource policy
>
> !
>
> network-clock-participate wic 3
>
> network-clock-select 1 BRI0/3/0
>
> ip subnet-zero
>
> !
>
> !
>
> ip cef
>
> !
>
> !
>
> isdn switch-type basic-net3
>
> !
>
> voice-card 0
>
> no dspfarm
>
> !
>
> !
>
> !
>
> !
>
> voice class codec 10
>
> codec preference 1 g711alaw
>
> codec preference 2 g711ulaw
>
> codec preference 4 g729r8
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> voice translation-rule 1
>
> rule 1 /934677367/ /6000/
>
> !
>
> !
>
> voice translation-profile digitstrip
>
> translate called 1
>
> !
>
> !
>
> !
>
> application
>
> global
>
> service alternate DEFAULT
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> interface GigabitEthernet0/0
>
> ip address 192.168.10.100 255.255.255.0
>
> duplex auto
>
> speed auto
>
> !
>
> interface GigabitEthernet0/1
>
> no ip address
>
> shutdown
>
> duplex auto
>
> speed auto
>
> !
>
> interface BRI0/3/0
>
> no ip address
>
> isdn switch-type basic-net3
>
> isdn network-failure-cause 34
>
> isdn point-to-point-setup
>
> isdn incoming-voice voice
>
> isdn bind-l3 ccm-manager service mgcp
>
> !
>
> interface BRI0/3/1
>
> no ip address
>
> isdn switch-type basic-net3
>
> isdn point-to-point-setup
>
> !
>
> interface Service-Engine1/0
>
> no ip address
>
> shutdown
>
> !
>
> ip classless
>
> !
>
> !
>
> ip http server
>
> no ip http secure-server
>
> !
>
> !
>
> !
>
> !
>
> control-plane
>
> !
>
> !
>
> !
>
> voice-port 0/3/0
>
> translation-profile incoming digitstrip
>
> compand-type a-law
>
> cptone ES
>
> !
>
> voice-port 0/3/1
>
> !
>
> ccm-manager fallback-mgcp
>
> ccm-manager mgcp
>
> ccm-manager music-on-hold
>
> ccm-manager config server 10.1.16.2
>
> ccm-manager config
>
> !
>
> mgcp
>
> mgcp call-agent 10.1.16.2 2427 service-type mgcp
> version 0.1
>
> mgcp dtmf-relay voip codec all mode out-of-band
>
> mgcp rtp unreachable timeout 1000 action notify
>
> mgcp modem passthrough voip mode nse
>
> mgcp package-capability rtp-package
>
> no mgcp package-capability res-package
>
> mgcp package-capability sst-package
>
> no mgcp package-capability fxr-package
>
> mgcp package-capability pre-package
>
> no mgcp timer receive-rtcp
>
> mgcp sdp simple
>
> mgcp fax t38 inhibit
>
> mgcp rtp payload-type g726r16 static
>
> mgcp bind control source-interface
> GigabitEthernet0/0
>
> mgcp bind media source-interface GigabitEthernet0/0
>
> !
>
> mgcp profile default
>
> !
>
> !
>
> !
>
> dial-peer voice 10 pots
>
> service mgcpapp
>
> destination-pattern 0.T
>
> direct-inward-dial
>
> port 0/3/0
>
> !
>
> !
>
> !
>
> call-manager-fallback
>
> max-conferences 8 gain -6
>
> transfer-system full-consult
>
> user-locale ES
>
> timeouts interdigit 3
>
> ip source-address 192.168.10.100 port 2000
>
> max-ephones 48
>
> max-dn 48 dual-line
>
> transfer-pattern 6...
>
> transfer-pattern .T
>
> moh SampleAudioSource.alaw.wav
>
> date-format dd-mm-yy
>
> !
>
> !
>
> line con 0
>
> line aux 0
>
> line 66
>
> no activation-character
>
> no exec
>
> transport preferred none
>
> transport input all
>
> transport output all
>
> line vty 0 4
>
> login
>
> !
>
> scheduler allocate 20000 1000
>
> !
>
> end
>
>
>
> Regards,
>
>
>
> Ruben
>
>
>
>
>
>
>
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
________________________________________
__________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: SRST and MGCP fallback to H323 |
|
|
|
|
03-25-06 02:46 PM
Hi,
I'm pulling the CallManager connection.
I have upgraded the gateway's version and also have done this change:
application
global
service alternate DEFAULT (put it in capital letters)
and now is working properly...
Many thanks for your help.
I attach the final config in case it can help somebody else...
Best regards,
Ruben
inversis# sh run
Building configuration...
Current configuration : 3165 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ipt
!
boot-start-marker
boot system flash c2800nm-spservicesk9-mz.124-2.T4.bin
boot-end-marker
!
logging buffered 500000 debugging
no logging console
!
no aaa new-model
!
resource policy
!
network-clock-participate wic 3
network-clock-select 1 BRI0/3/0
ip subnet-zero
!
!
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.0.0.250
!
ip dhcp pool ipt
network 10.0.0.0 255.255.255.0
option 150 ip 10.0.0.250
default-router 10.0.0.1
!
!
no ip domain lookup
isdn switch-type basic-net3
!
voice-card 0
no dspfarm
!
!
!
!
voice class codec 10
codec preference 1 g711alaw
codec preference 2 g711ulaw
codec preference 4 g729r8
!
!
!
!
!
!
!
!
!
voice translation-rule 1
rule 1 /934677367/ /8000/
!
!
voice translation-profile digitstrip
translate called 1
!
!
!
application
global
service alternate DEFAULT
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
ip address 10.0.0.1 255.255.255.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface BRI0/3/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
!
interface BRI0/3/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn bind-l3 ccm-manager service mgcp
isdn static-tei 0
!
interface Service-Engine1/0
no ip address
shutdown
!
ip classless
!
!
ip http server
no ip http secure-server
!
!
!
!
control-plane
!
!
!
voice-port 0/3/0
translation-profile incoming digitstrip
compand-type a-law
!
voice-port 0/3/1
compand-type a-law
!
ccm-manager switchback immediate
ccm-manager fallback-mgcp
ccm-manager mgcp
ccm-manager music-on-hold
ccm-manager config server 10.0.0.250
ccm-manager config
!
mgcp
mgcp call-agent 10.0.0.250 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
mgcp package-capability pre-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
!
mgcp profile default
!
!
!
dial-peer voice 10 pots
service mgcpapp
destination-pattern 0.T
direct-inward-dial
port 0/3/0
!
!
!
call-manager-fallback
max-conferences 8 gain -6
transfer-system full-consult
user-locale ES
timeouts interdigit 3
ip source-address 10.0.0.1 port 2000
max-ephones 48
max-dn 48 dual-line
transfer-pattern 8...
transfer-pattern .T
moh SampleAudioSource.alaw.wav
date-format dd-mm-yy
!
!
line con 0
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output all
line vty 0 4
login
!
scheduler allocate 20000 1000
!
end
-----Mensaje original-----
De: Erick Bergquist [mailto:erickbe@yahoo.com]
Enviado el: viernes, 24 de marzo de 2006 14:33
Para: Ruben Montes (EU); Fedorov, Konstantin; Brian Henry;
cisco-voip@puck.nether.net
Asunto: Re: [cisco-voip] SRST and MGCP fallback to H323
How are you testing fallback?
Are you pulling all WAN/LAN connections from the
router that have a way back to CCM? Putting a
Access-list in, blackhole route, etc? ACLs do not stop
traffic generated by the router locally if you are
using an ACL.
--- "Ruben Montes (EU)" <Ruben.Montes@eu.didata.com>
wrote:
> Hi,
>
>
>
> I have chaged the application statement to this:
>
>
>
> application
>
> global
>
> service alternate Default
>
>
>
> But the result is the same: it seems the isdn never
> fallbacks to H323...
> Can anybody share a working config? This is pretty
> simple but I can't
> manage to have it working...
>
>
>
> Regards,
>
>
>
> Ruben
>
>
>
> ________________________________
>
> De: Fedorov, Konstantin [mailto:kfedor@amt.ru]
> Enviado el: viernes, 24 de marzo de 2006 10:53
> Para: Brian Henry; Ruben Montes (EU);
> cisco-voip@puck.nether.net
> Asunto: RE: [cisco-voip] SRST and MGCP fallback to
> H323
>
>
>
> Hi,
>
>
>
> application
>
> global
>
> service alternate DEFAULT
>
>
>
>
>
> This is new style command.
>
> -----------------------
> Sincerely Yours,
> Konstantin Fedorov
>
> ________________________________
>
> From: Brian Henry [mailto:Brian.Henry@apptis.com]
> Sent: Friday, March 24, 2006 4:44 AM
> To: Fedorov, Konstantin; Ruben Montes (EU);
> cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] SRST and MGCP fallback to
> H323
>
>
>
> I guess I should select the correct e-mail !! :-)
>
>
>
>
>
> Where is the command "call application alternate
> default" or "service
> default"
>
>
>
> Brian
>
> ________________________________
>
> From: cisco-voip-bounces@puck.nether.net on behalf
> of Fedorov,
> Konstantin
> Sent: Thu 3/23/2006 5:16 PM
> To: Ruben Montes (EU); cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] SRST and MGCP fallback to
> H323
>
>
>
>
> But I can assume that default application can be
> case sensitive/
>
> So type
>
> Sh call application sum
>
>
>
> And type exactly how it looks, try.
>
>
>
> -----------------------
> Sincerely Yours,
> Konstantin Fedorov
>
> ________________________________
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On
> Behalf Of Ruben Montes
> (EU)
> Sent: Thursday, March 23, 2006 8:15 PM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] SRST and MGCP fallback to H323
>
>
>
> Hi,
>
>
>
> I'm having some troubles configuring these
> functionalities. SRST is
> working properly but MGCP fallback it is not.
>
> When the gateway looses connectivity with the CCM
> manager, it seems it
> doesn't default to H323. If I do a show isdn status
> I get the following:
>
>
>
> Global ISDN Switchtype = basic-net3
>
>
>
> %Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 6.
> Layer 3 output may
> not apply
>
>
>
> ISDN BRI0/3/0 interface
>
> dsl 6, interface ISDN Switchtype =
> basic-net3
>
> L2 Protocol = Q.921 0x0000 L3 Protocol(s) =
> CCM MANAGER 0x0003
>
> Layer 1 Status:
>
> ACTIVE
>
> Layer 2 Status:
>
> Layer 2 NOT Activated
>
> Layer 3 Status:
>
> 0 Active Layer 3 Call(s)
>
> Active dsl 6 CCBs = 0
>
> The Free Channel Mask: 0x80000003
>
>
>
> So, I assume the BRI is still controlled by the CCM
> and logically is
> down...
>
>
>
> Any idea why this isn't working??? This is my first
> configuration of
> this functionality so it can also be a configuration
> error...
>
>
>
> This is my config:
>
>
>
> Building configuration...
>
>
>
> Current configuration : 2809 bytes
>
> !
>
> version 12.4
>
> service config
>
> service timestamps debug datetime msec
>
> service timestamps log datetime msec
>
> no service password-encryption
>
> !
>
> hostname Router
>
> !
>
> boot-start-marker
>
> boot-end-marker
>
> !
>
> logging buffered 500000 debugging
>
> no logging console
>
> !
>
> no aaa new-model
>
> !
>
> resource policy
>
> !
>
> network-clock-participate wic 3
>
> network-clock-select 1 BRI0/3/0
>
> ip subnet-zero
>
> !
>
> !
>
> ip cef
>
> !
>
> !
>
> isdn switch-type basic-net3
>
> !
>
> voice-card 0
>
> no dspfarm
>
> !
>
> !
>
> !
>
> !
>
> voice class codec 10
>
> codec preference 1 g711alaw
>
> codec preference 2 g711ulaw
>
> codec preference 4 g729r8
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> voice translation-rule 1
>
> rule 1 /934677367/ /6000/
>
> !
>
> !
>
> voice translation-profile digitstrip
>
> translate called 1
>
> !
>
> !
>
> !
>
> application
>
> global
>
> service alternate DEFAULT
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> !
>
> interface GigabitEthernet0/0
>
> ip address 192.168.10.100 255.255.255.0
>
> duplex auto
>
> speed auto
>
> !
>
> interface GigabitEthernet0/1
>
> no ip address
>
> shutdown
>
> duplex auto
>
> speed auto
>
> !
>
> interface BRI0/3/0
>
> no ip address
>
> isdn switch-type basic-net3
>
> isdn network-failure-cause 34
>
> isdn point-to-point-setup
>
> isdn incoming-voice voice
>
> isdn bind-l3 ccm-manager service mgcp
>
> !
>
> interface BRI0/3/1
>
> no ip address
>
> isdn switch-type basic-net3
>
> isdn point-to-point-setup
>
> !
>
> interface Service-Engine1/0
>
> no ip address
>
> shutdown
>
> !
>
> ip classless
>
> !
>
> !
>
> ip http server
>
> no ip http secure-server
>
> !
>
> !
>
> !
>
> !
>
> control-plane
>
> !
>
> !
>
> !
>
> voice-port 0/3/0
>
> translation-profile incoming digitstrip
>
> compand-type a-law
>
> cptone ES
>
> !
>
> voice-port 0/3/1
>
> !
>
> ccm-manager fallback-mgcp
>
> ccm-manager mgcp
>
> ccm-manager music-on-hold
>
> ccm-manager config server 10.1.16.2
>
> ccm-manager config
>
> !
>
> mgcp
>
> mgcp call-agent 10.1.16.2 2427 service-type mgcp
> version 0.1
>
> mgcp dtmf-relay voip codec all mode out-of-band
>
> mgcp rtp unreachable timeout 1000 action notify
>
> mgcp modem passthrough voip mode nse
>
> mgcp package-capability rtp-package
>
> no mgcp package-capability res-package
>
> mgcp package-capability sst-package
>
> no mgcp package-capability fxr-package
>
> mgcp package-capability pre-package
>
> no mgcp timer receive-rtcp
>
> mgcp sdp simple
>
> mgcp fax t38 inhibit
>
> mgcp rtp payload-type g726r16 static
>
> mgcp bind control source-interface
> GigabitEthernet0/0
>
> mgcp bind media source-interface GigabitEthernet0/0
>
> !
>
> mgcp profile default
>
> !
>
> !
>
> !
>
> dial-peer voice 10 pots
>
> service mgcpapp
>
> destination-pattern 0.T
>
> direct-inward-dial
>
> port 0/3/0
>
> !
>
> !
>
> !
>
> call-manager-fallback
>
> max-conferences 8 gain -6
>
> transfer-system full-consult
>
> user-locale ES
>
> timeouts interdigit 3
>
> ip source-address 192.168.10.100 port 2000
>
> max-ephones 48
>
> max-dn 48 dual-line
>
> transfer-pattern 6...
>
> transfer-pattern .T
>
> moh SampleAudioSource.alaw.wav
>
> date-format dd-mm-yy
>
> !
>
> !
>
> line con 0
>
> line aux 0
>
> line 66
>
> no activation-character
>
> no exec
>
> transport preferred none
>
> transport input all
>
> transport output all
>
> line vty 0 4
>
> login
>
> !
>
> scheduler allocate 20000 1000
>
> !
>
> end
>
>
>
> Regards,
>
>
>
> Ruben
>
>
>
>
>
>
>
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
________________________________________
__________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Sponsored Links |
|
|
|
|
 |
All times are GMT. The time now is 09:43 PM. |
 |
|
|
 |
|
 |
|
|
 |
|
| |
|
