The unsupported devices included the network card, video card, usb
system and some other system components.
 
Thanks for the information.
 

________________________________

From: Wes Sisk [mailto:wsisk@cisco.com] 
Sent: Wednesday, April 26, 2006 6:06 PM
To: Scott O'Donnell
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Installing Unity from MCS hardware Detection
Disk Set?


Interesting.  What devices are showing unsupported that would be
necessary for Unity?  We really only need disk and network access...
Unless you go back to the 3.x days with USB/parallel dongles.

I believe the dialogic cards always show up as unsupported hardware, but
that is not an issue after drivers are installed.

customized how? tweaking of the TCP/IP stack, exclusion of certain files
and file types to preserve disk space, local security policy
modifications, ....

/Wes

Scott O'Donnell wrote: 

Wes,
 
Thanks for the reply.
I attempted an install from an MS Disk but so many of the
devices showed up in Device manage as unknown, I figured I could get a
stable install off the MCS disks.
I'll go back to the MS Disks and fight through it.
 
BTW: My understanding was that the MCS install was a vanilla
install with specific services disabled.
What else makes it so different?
 
Scott
 

________________________________

From: Wes Sisk [mailto:wsisk@cisco.com] 
Sent: Wednesday, April 26, 2006 4:44 PM
To: Scott O'Donnell
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] Installing Unity from MCS Hardware
Detection Disk Set?
	
	
the win-OS disks (2000.2.7, 2000.4.1, 2000.4.3) are for CM, PA,
CRA, CER only.  Unity is not supported with those OS disks.
	
Unity does have platform configuration disks that ship with a
different (full featured) version of windows.
	
You will need to use the windows install disk that comes with
unity or one directly from MS.
	
/Wes
	
Scott O'Donnell wrote: 

Has anyone installed Unity using the disk set for
installing MCS servers?
I have a customer that is providing the Windows
Licensing for Unity but when installing from their CD, the 7815 I'm
installing for Unity shows up with a load of unknown devices.
Is there anything installed (or not installed) with the
MCS image install that will screw Unity up and cause it not to work?
 
 
	
________________________________


 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
 

Attachment:
This has been downloaded 0 time(s).

[ Post a follow-up to this message ]