Hi,

I have 10 messages in the messagebox, and a send port that listens to all of
them. The send port is using ftp transport type. How ca I be 100% sure that
the sendport is handling one message at a time, serial?
The ftpserver will be "killed" if if transmit more than one message at a tim
e.

Regards,
/Daniel

[ Post a follow-up to this message ]

Hi again,

In addition I also need to know how to achieve the following commands from
the ftp adapter: (following is successfully run at the command prompt)

ftp 125.32.055.2
User: MYUSER
Password: MYPASSWORD
put liv;REC=-1070,,f,ascii
quote site stream HEPP
quit

/Daniel

"DW" wrote:

> Hi,
>
> I have 10 messages in the messagebox, and a send port that listens to all 
of
> them. The send port is using ftp transport type. How ca I be 100% sure tha
t
> the sendport is handling one message at a time, serial?
> The ftpserver will be "killed" if if transmit more than one message at a t
ime.
>
> Regards,
> /Daniel

[ Post a follow-up to this message ]

Hi Daniel,

I'm currently researching this issue. Thanks.

Best regards,

WenJun Zhang
Microsoft Online Partner Support

This posting is provided "AS IS" with no warranties, and confers no rights.

[ Post a follow-up to this message ]

I believe you can set the "Connection Limit" on the FTP Send Port to "1"
which should prevent multiple simultaneous connections from occuring.

--
Jeff Lynch
Ramblings from a [Microsoft] Connected Universe!
http://codebetter.com/blogs/jeff.lynch


"DW" <danielwilendaniel@online.nospam> wrote in message
news:7FF34BB7-23EB-4E30-B323-FC00DB0C51D3@microsoft.com...
> Hi,
>
> I have 10 messages in the messagebox, and a send port that listens to all
> of
> them. The send port is using ftp transport type. How ca I be 100% sure
> that
> the sendport is handling one message at a time, serial?
> The ftpserver will be "killed" if if transmit more than one message at a
> time.
>
> Regards,
> /Daniel

[ Post a follow-up to this message ]