I have similar configuration, FXS are MGCP controlled and T1 are H323
controlled.

TAC advised I not do this, as the MGCP "Trombone" will overwrite any
H323 config stuff.  I asked the Ciscc TAC SE where in the SRND or on CCO
it talks about or advised not to mix MGCP/H323, he said it not posted.

I too would like more info, as I have it working, but they say don't do
this!

I need H323 for T38/XMedius Fax and MGCP FXS for centralized dialplan.
Will MGCP ever get T38 with XMedius support?  Will H323 ever get Calling
Party Name in the right information element (display ie vs facility ie)?


-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jose Mujica
Sent: Tuesday, May 23, 2006 12:45 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] T.37 OffRamp Faxing Using cisco 3825 Router and
UnityIP Fax Service

Hi. I already have a cisco 3825 with 2 T1/PRI with a cisco CallManager
cluster
already using MGCP. Now the client would like the ability to
send/received
faxes from the desktop. I know T.37 OffRamp works with H323 but can I
have
MGCP on the router for the 2 T1/PRI and then configure H323 on the same
router
for the 3rd T1/PRI to be use for incoming/outgoing fax using T.37??? Can
both
protocols be configured on the same router without any problems? I
haven't
test it out yet.

Any ideas?

Thanks in advanced,
-Jose
 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.

[ Post a follow-up to this message ]