05-30-06 12:11 AM
Depends on whether you allow split tunnel in your VPN. If you don't allow =
split tunnel then all RTP voice bearer traffic between IP Phones will have =
to traverse the VPN tunnel. =
If your PSTN connection is inside your network, then every call out the PST=
N will travel the VPN.
Avaya demoed phones running SSL back to a https server at VoiceCon in Orlan=
do. Great idea (similar to running Outlook with Exchange RPC over https).
Voice-signaling is Phone to CCM
Voice-bearer is Phone-to-Phone or Phone-to-Gateway
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.ne=
ther.net] On Behalf Of miguel
Sent: Sunday, May 28, 2006 11:05 AM
To: Chris Serafin
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] IP Communicator media issue
well, my doubt is because the user set up a VPN. So I don't know if the =
media it is routed directly to the media server, or goes first to the =
CCM site. :S
Chris Serafin escribi=F3:
> I believe it signals to the CCM and the the RTP traffic is 'p2p'- =
> like. Which would use BW to the peer
>
> I could be totally wrong
>
> cisco80211
> Chris Serafin
> IT Security / cisco VoIP Engineer
> chris@chrisserafin.com
>
>
> don_miguel@chile.com wrote:
[vbcol=seagreen]
[vbcol=seagreen]
>
>
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
[ Post a follow-up to this message ]
|