Just wondering how easy it is to configure and maintain SRST on a router? Do
 I have to configure each phone on the router? How about dialplans (partitio
ns, search spaces, route patterns, etc)?

I was under the impression that the router downloads everything it needs fro
m the publisher, but in doing some reading, it looks like I might actually h
ave to type 'config t' at some point. *shiver*

----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."

Attachment:
This has been downloaded 0 time(s).

[ Post a follow-up to this message ]

In SRST mode the router is basically acting like a CME but without
all the fancy features.    You don't configure any ephone or ephone-
dns but you do need to configure dial-peers if you want your phones
to make outside calls.

-Ryan

On May 31, 2006, at 9:39 AM, Lelio Fulgenzi wrote:

Just wondering how easy it is to configure and maintain SRST on a
router? Do I have to configure each phone on the router? How about
dialplans (partitions, search spaces, route patterns, etc)?

I was under the impression that the router downloads everything it
needs from the publisher, but in doing some reading, it looks like I
might actually have to type 'config t' at some point. *shiver*

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]

You may also need to handle inbound calls, unless the digits coming in match
 a extension on a IP Phone in fallback exactly. Translation rules, etc may b
e needed to get other numbers routed to real phones in fallback.

----- Original Message ----
From: Ryan Ratliff <rratliff@cisco.com>
To: Lelio Fulgenzi <lelio@uoguelph.ca>
Cc: cisco-voip@puck.nether.net
Sent: Wednesday, May 31, 2006 9:09:36 AM
Subject: Re: [cisco-voip] how easy is SRST?

In SRST mode the router is basically acting like a CME but without
all the fancy features.    You don't configure any ephone or ephone-
dns but you do need to configure dial-peers if you want your phones
to make outside calls.

-Ryan

On May 31, 2006, at 9:39 AM, Lelio Fulgenzi wrote:

Just wondering how easy it is to configure and maintain SRST on a
router? Do I have to configure each phone on the router? How about
dialplans (partitions, search spaces, route patterns, etc)?

I was under the impression that the router downloads everything it
needs from the publisher, but in doing some reading, it looks like I
might actually have to type 'config t' at some point. *shiver*

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]

What I'd like to do is have inbound calls go to a centralized AA when the
link is up and then to a local person's extension (or other destination)
when the link is down.

Do you think that is possible?

----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message -----
From: "Erick Bergquist" <erickbe@yahoo.com>
To: "Ryan Ratliff" <rratliff@cisco.com>; "Lelio Fulgenzi"
<lelio@uoguelph.ca>
Cc: <cisco-voip@puck.nether.net>
Sent: Wednesday, May 31, 2006 4:16 PM
Subject: Re: [cisco-voip] how easy is SRST?


> You may also need to handle inbound calls, unless the digits coming in
> match a extension on a IP Phone in fallback exactly. Translation rules,
> etc may be needed to get other numbers routed to real phones in fallback.
>
> ----- Original Message ----
> From: Ryan Ratliff <rratliff@cisco.com>
> To: Lelio Fulgenzi <lelio@uoguelph.ca>
> Cc: cisco-voip@puck.nether.net
> Sent: Wednesday, May 31, 2006 9:09:36 AM
> Subject: Re: [cisco-voip] how easy is SRST?
>
> In SRST mode the router is basically acting like a CME but without
> all the fancy features.    You don't configure any ephone or ephone-
> dns but you do need to configure dial-peers if you want your phones
> to make outside calls.
>
> -Ryan
>
> On May 31, 2006, at 9:39 AM, Lelio Fulgenzi wrote:
>
> Just wondering how easy it is to configure and maintain SRST on a
> router? Do I have to configure each phone on the router? How about
> dialplans (partitions, search spaces, route patterns, etc)?
>
> I was under the impression that the router downloads everything it
> needs from the publisher, but in doing some reading, it looks like I
> might actually have to type 'config t' at some point. *shiver*
>
> ------------------------------------------------------------------------
> --------
> Lelio Fulgenzi, B.A.
> Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "I can eat fifty eggs." "Nobody can eat fifty eggs."
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>

[ Post a follow-up to this message ]

Easily.  Remember when the gateway is up all inbound calls should be
backhauled to CM.   The dial-peers only come into play when SRST
kicks in.  The phones will keep their dns so you just need to
translate the incoming called number to the phone extension.

-Ryan

On May 31, 2006, at 4:27 PM, Lelio Fulgenzi wrote:

What I'd like to do is have inbound calls go to a centralized AA when
the link is up and then to a local person's extension (or other
destination) when the link is down.

Do you think that is possible?

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message ----- From: "Erick Bergquist" <erickbe@yahoo.com>
To: "Ryan Ratliff" <rratliff@cisco.com>; "Lelio Fulgenzi"
<lelio@uoguelph.ca>
Cc: <cisco-voip@puck.nether.net>
Sent: Wednesday, May 31, 2006 4:16 PM
Subject: Re: [cisco-voip] how easy is SRST?


> You may also need to handle inbound calls, unless the digits coming
> in match a extension on a IP Phone in fallback exactly. Translation
> rules, etc may be needed to get other numbers routed to real phones
> in fallback.
>
> ----- Original Message ----
> From: Ryan Ratliff <rratliff@cisco.com>
> To: Lelio Fulgenzi <lelio@uoguelph.ca>
> Cc: cisco-voip@puck.nether.net
> Sent: Wednesday, May 31, 2006 9:09:36 AM
> Subject: Re: [cisco-voip] how easy is SRST?
>
> In SRST mode the router is basically acting like a CME but without
> all the fancy features.    You don't configure any ephone or ephone-
> dns but you do need to configure dial-peers if you want your phones
> to make outside calls.
>
> -Ryan
>
> On May 31, 2006, at 9:39 AM, Lelio Fulgenzi wrote:
>
> Just wondering how easy it is to configure and maintain SRST on a
> router? Do I have to configure each phone on the router? How about
> dialplans (partitions, search spaces, route patterns, etc)?
>
> I was under the impression that the router downloads everything it
> needs from the publisher, but in doing some reading, it looks like I
> might actually have to type 'config t' at some point. *shiver*
>
> ----------------------------------------------------------------------
> -- --------
> Lelio Fulgenzi, B.A.
> Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "I can eat fifty eggs." "Nobody can eat fifty eggs."
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>

[ Post a follow-up to this message ]

Excellent. Thanks.
----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message -----
From: "Ryan Ratliff" <rratliff@cisco.com>
To: "Lelio Fulgenzi" <lelio@uoguelph.ca>
Cc: "Erick Bergquist" <erickbe@yahoo.com>; <cisco-voip@puck.nether.net>
Sent: Wednesday, May 31, 2006 5:25 PM
Subject: Re: [cisco-voip] how easy is SRST?


> Easily.  Remember when the gateway is up all inbound calls should be
> backhauled to CM.   The dial-peers only come into play when SRST  kicks
> in.  The phones will keep their dns so you just need to  translate the
> incoming called number to the phone extension.
>
> -Ryan
>
> On May 31, 2006, at 4:27 PM, Lelio Fulgenzi wrote:
>
> What I'd like to do is have inbound calls go to a centralized AA when  the
> link is up and then to a local person's extension (or other  destination)
> when the link is down.
>
> Do you think that is possible?
>
> ------------------------------------------------------------------------
> --------
> Lelio Fulgenzi, B.A.
> Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "I can eat fifty eggs." "Nobody can eat fifty eggs."
> ----- Original Message ----- From: "Erick Bergquist" <erickbe@yahoo.com>
> To: "Ryan Ratliff" <rratliff@cisco.com>; "Lelio Fulgenzi"
> <lelio@uoguelph.ca>
> Cc: <cisco-voip@puck.nether.net>
> Sent: Wednesday, May 31, 2006 4:16 PM
> Subject: Re: [cisco-voip] how easy is SRST?
>
> 
>
>

[ Post a follow-up to this message ]

Also, the translation is easily accomplished with the dial-plan pattern
command.  As an example, if the telco is sending you ten digits
(2124443...), your command, in call-mananger-fallback mode would look
like this:

Dial-plan pattern 1 2124443... extension 4  <-- points to the extension
length used in your branch

This handles inbound translation for any incoming call to phone and
slaps on a 10 digit ani for caller id on the outbound.

Joe

-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Wednesday, May 31, 2006 2:26 PM
To: Lelio Fulgenzi
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] how easy is SRST?

Easily.  Remember when the gateway is up all inbound calls should be
backhauled to CM.   The dial-peers only come into play when SRST
kicks in.  The phones will keep their dns so you just need to
translate the incoming called number to the phone extension.

-Ryan

On May 31, 2006, at 4:27 PM, Lelio Fulgenzi wrote:

What I'd like to do is have inbound calls go to a centralized AA when
the link is up and then to a local person's extension (or other
destination) when the link is down.

Do you think that is possible?

------------------------------------------------------------------------

--------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message ----- From: "Erick Bergquist" <erickbe@yahoo.com>
To: "Ryan Ratliff" <rratliff@cisco.com>; "Lelio Fulgenzi"
<lelio@uoguelph.ca>
Cc: <cisco-voip@puck.nether.net>
Sent: Wednesday, May 31, 2006 4:16 PM
Subject: Re: [cisco-voip] how easy is SRST?


> You may also need to handle inbound calls, unless the digits coming
> in match a extension on a IP Phone in fallback exactly. Translation
> rules, etc may be needed to get other numbers routed to real phones
> in fallback.
>
> ----- Original Message ----
> From: Ryan Ratliff <rratliff@cisco.com>
> To: Lelio Fulgenzi <lelio@uoguelph.ca>
> Cc: cisco-voip@puck.nether.net
> Sent: Wednesday, May 31, 2006 9:09:36 AM
> Subject: Re: [cisco-voip] how easy is SRST?
>
> In SRST mode the router is basically acting like a CME but without
> all the fancy features.    You don't configure any ephone or ephone-
> dns but you do need to configure dial-peers if you want your phones
> to make outside calls.
>
> -Ryan
>
> On May 31, 2006, at 9:39 AM, Lelio Fulgenzi wrote:
>
> Just wondering how easy it is to configure and maintain SRST on a
> router? Do I have to configure each phone on the router? How about
> dialplans (partitions, search spaces, route patterns, etc)?
>
> I was under the impression that the router downloads everything it
> needs from the publisher, but in doing some reading, it looks like I
> might actually have to type 'config t' at some point. *shiver*
>
> ----------------------------------------------------------------------

> -- --------
> Lelio Fulgenzi, B.A.
> Network Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
>  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> "I can eat fifty eggs." "Nobody can eat fifty eggs."
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>

 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


This message and any attachments are intended only for the use of the addres
see and may contain information that is privileged and confidential. If the 
reader of the message is not the intended recipient or an authorized represe
ntative of the intended rec
ipient, you are hereby notified that any dissemination of this communication
 is strictly prohibited. If you have received this communication in error, p
lease notify us immediately by e-mail and delete the message and any attachm
ents from your system.

[ Post a follow-up to this message ]