Hey Guys,

This is driving me nuts.. i'm probably overlooking something.. :

I'm working with a proxied temp RSO..
In some situations after the nc.onStatus is called with a =
"NetConnection.Connect.Success" and the RSO is connected it will call =
the nc.onStatus with "SharedObject.Proxy.Connect"..
When the "SharedObject.Proxy.Connect" comes by the RSO won't(/or after =
10 min) give an onSync untill the RSO is changed, instead of an =
onFirstSync..
When the "SharedObject.Proxy.Connect" doesn't come it works just fine.

Anyone got an idea.. i'm to deep in it so i'm probably overlooking the =
simpel solution.

Many thanks


Dennis
 ________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com

[ Post a follow-up to this message ]

Dennis - I Sioux wrote:
> I'm working with a proxied temp RSO..
> In some situations after the nc.onStatus is called with a "NetConnection.C
onnect.Success" and the RSO is connected it will call the nc.onStatus with "
SharedObject.Proxy.Connect"..
> When the "SharedObject.Proxy.Connect" comes by the RSO won't(/or after 10 
min) give an onSync untill the RSO is changed, instead of an onFirstSync..
> When the "SharedObject.Proxy.Connect" doesn't come it works just fine.
>
> Anyone got an idea.. i'm to deep in it so i'm probably overlooking the sim
pel solution.
>
>
FMS2  or FCS 1.5.2 ?


 ________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com

[ Post a follow-up to this message ]

FMS2

I saw Brian Lesser on the list aswell.. it's actually about the 1.5 script
for the activeUser list from the book he wrote on :-D

Cheers,

Dennis

----- Original Message -----
From: "Dario De Agostini" <dario-GCN6p6BpY0//wltNWqQaag@public.gmane.org>
To: "FlashComm Mailing List" <flashcomm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@pub
lic.gmane.org>
Sent: Tuesday, June 06, 2006 12:59 PM
Subject: Re: [FlashComm] RSO and "SharedObject.Proxy.Connect"


> Dennis - I Sioux wrote: 
> FMS2  or FCS 1.5.2 ?
>
>
>  ________________________________________
_______
> FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> To change your subscription options or search the archive:
> http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
> Brought to you by Fig Leaf Software
> Premier Authorized Adobe Consulting and Training
> http://www.figleaf.com
> http://training.figleaf.com
>


 ________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com

[ Post a follow-up to this message ]

Hi Dennis,
I'm just checking mail while on vacation so I may not get an answer to
you quickly. Before I dig into the code, can you answer these questions
for me:

1. What version of FCS/FMS are you using now?
2. Are you using the Active Chat Users (437K Zip file) code from chapter 16?

Yours truly,
-Brian

Dennis - I Sioux wrote:

> FMS2
>
> I saw Brian Lesser on the list aswell.. it's actually about the 1.5
> script for the activeUser list from the book he wrote on :-D
>
> Cheers,
>
> Dennis
>
> ----- Original Message ----- From: "Dario De Agostini"
> <dario-GCN6p6BpY0//wltNWqQaag@public.gmane.org>
> To: "FlashComm Mailing List" <flashcomm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@p
ublic.gmane.org>
> Sent: Tuesday, June 06, 2006 12:59 PM
> Subject: Re: [FlashComm] RSO and "SharedObject.Proxy.Connect"
>
> 
>
>
>  ________________________________________
_______
> FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> To change your subscription options or search the archive:
> http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
> Brought to you by Fig Leaf Software
> Premier Authorized Adobe Consulting and Training
> http://www.figleaf.com
> http://training.figleaf.com



--
 ________________________________________
______________________________
Brian Lesser
Assistant Director, Teaching and Technology Support
Computing and Communications Services
Ryerson University
350 Victoria St.
Toronto, Ontario                   Phone: (416) 979-5000 ext. 6835
M5B 2K3                            Fax: (416) 979-5220
Office: AB48D                      E-mail: blesser-6s6ziW1YCwCw5LPnMra/2Q@pu
blic.gmane.org
(Enter through LB66)               Web: http://www.ryerson.ca/~blesser
 ________________________________________
______________________________

 ________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com

[ Post a follow-up to this message ]

Hey Brian,

Thanks for the reply from your vacation (programmer never stops i guess :=
) )

1. version 2.0 (Console:1.075)
2. Indeed i'm using the 16 example

I'm bypassing the webserver tickets at the moment.. so i have just the fl=
ash=20
media server to worry about..
=CDt seems to be giving the proxy.connect problem mentioned earlier when =
the=20
nc is already connected when the ActiveChatUsers_Leaf creates the=20
activeUsers RSO.
Resulting that the onSync doesn't get called.. or in an large=20
(server)interval or something all at once.
It also seems to make difference if the SO are already created once...or =
if=20
i delete them first manually.
Further notes are that i bypassed the wait on the second client in the=20
removePendingComponent.. so a single user can join a room.

Thanks for any help/insight you could give me!

Cheers,

Dennis



----- Original Message -----=20
From: "Brian Lesser" <blesser-6s6ziW1YCwCw5LPnMra/2Q@public.gmane.org>
To: "FlashComm Mailing List" <flashcomm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@pub
lic.gmane.org>
Sent: Tuesday, June 06, 2006 5:14 PM
Subject: Re: [FlashComm] RSO and "SharedObject.Proxy.Connect"


> Hi Dennis,
> I'm just checking mail while on vacation so I may not get an answer to =
you=20
> quickly. Before I dig into the code, can you answer these questions for=
=20
> me:
>
> 1. What version of FCS/FMS are you using now?
> 2. Are you using the Active Chat Users (437K Zip file) code from chapte=
r=20
> 16?
>
> Yours truly,
> -Brian
>
> Dennis - I Sioux wrote:
> 
l=20[vbcol=seagreen] 
er=20[vbcol=seagreen] 
e.[vbcol=seagreen] 
he=20[vbcol=seagreen] 
>
>
>
> --=20
>  ________________________________________
______________________________
> Brian Lesser
> Assistant Director, Teaching and Technology Support
> Computing and Communications Services
> Ryerson University
> 350 Victoria St.
> Toronto, Ontario                   Phone: (416) 979-5000 ext. 6835
> M5B 2K3                            Fax: (416) 979-5220
> Office: AB48D                      E-mail: blesser-6s6ziW1YCwCw5LPnMra/2Q@
public.gmane.org
> (Enter through LB66)               Web: http://www.ryerson.ca/~blesser
>  ________________________________________
______________________________
>
>  ________________________________________
_______
> FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> To change your subscription options or search the archive:
> http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
> Brought to you by Fig Leaf Software
> Premier Authorized Adobe Consulting and Training
> http://www.figleaf.com
> http://training.figleaf.com
>=20


 ________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com

[ Post a follow-up to this message ]

Hi Dennis,
I've experimented a little with the code. In my tests there is always a=20
NetConnection.Connect.Success followed by a SharedObject.Proxy.Connect=20
message. I always get both messages. However, the application does have=20
the problem that sometimes onSync in called and sometimes it is not on=20
the Proxied SharedObject. I have not seen this before so will have to=20
create a much smaller test sample to try to find out what is wrong or at=20
least create a work around. I probably won't get back to this until=20
tomorrow.
Yours truly,
-Brian


Dennis - I Sioux wrote:

>
> Hey Brian,
>
> Thanks for the reply from your vacation (programmer never stops i=20
> guess  )
>
> 1. version 2.0 (Console:1.075)
> 2. Indeed i'm using the 16 example
>
> I'm bypassing the webserver tickets at the moment.. so i have just the=20
> flash media server to worry about..
> =CDt seems to be giving the proxy.connect problem mentioned earlier whe=
n=20
> the nc is already connected when the ActiveChatUsers_Leaf creates the=20
> activeUsers RSO.
> Resulting that the onSync doesn't get called.. or in an large=20
> (server)interval or something all at once.
> It also seems to make difference if the SO are already created=20
> once...or if i delete them first manually.
> Further notes are that i bypassed the wait on the second client in the=20
> removePendingComponent.. so a single user can join a room.
>
> Thanks for any help/insight you could give me!
>
> Cheers,
>
> Dennis
>
>


--=20
 ________________________________________
______________________________
Brian Lesser
Assistant Director, Teaching and Technology Support
Computing and Communications Services
Ryerson University
350 Victoria St.
Toronto, Ontario                   Phone: (416) 979-5000 ext. 6835
M5B 2K3                            Fax: (416) 979-5220
Office: AB48D                      E-mail: blesser-6s6ziW1YCwCw5LPnMra/2Q@pu
blic.gmane.org
(Enter through LB66)               Web: http://www.ryerson.ca/~blesser
 ________________________________________
______________________________

 ________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com

[ Post a follow-up to this message ]

Hey Brian,

Many thanks for the insight.. this is driving me crazy for over a week no=
w..
If this is to mutch a personal issue and should go offtopic you could alw=
ays=20
mail me at Dennis-OWPHOFbGEQJ4mq39ihy3YQ@public.gmane.org

Thanks!

Cheers,

Dennis

----- Original Message -----=20
From: "Brian Lesser" <blesser-6s6ziW1YCwCw5LPnMra/2Q@public.gmane.org>
To: "FlashComm Mailing List" <flashcomm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@pub
lic.gmane.org>
Sent: Tuesday, June 06, 2006 9:54 PM
Subject: Re: [FlashComm] RSO and "SharedObject.Proxy.Connect"


> Hi Dennis,
> I've experimented a little with the code. In my tests there is always a=
=20
> NetConnection.Connect.Success followed by a SharedObject.Proxy.Connect=20
> message. I always get both messages. However, the application does have=
=20
> the problem that sometimes onSync in called and sometimes it is not on =
the=20
> Proxied SharedObject. I have not seen this before so will have to creat=
e a=20
> much smaller test sample to try to find out what is wrong or at least=20
> create a work around. I probably won't get back to this until tomorrow.
> Yours truly,
> -Brian
>
>
> Dennis - I Sioux wrote:
> 
s=20[vbcol=seagreen] 
=20[vbcol=seagreen] 
en=20[vbcol=seagreen] 
or=20[vbcol=seagreen] 
=20[vbcol=seagreen] 
>
>
> --=20
>  ________________________________________
______________________________
> Brian Lesser
> Assistant Director, Teaching and Technology Support
> Computing and Communications Services
> Ryerson University
> 350 Victoria St.
> Toronto, Ontario                   Phone: (416) 979-5000 ext. 6835
> M5B 2K3                            Fax: (416) 979-5220
> Office: AB48D                      E-mail: blesser-6s6ziW1YCwCw5LPnMra/2Q@
public.gmane.org
> (Enter through LB66)               Web: http://www.ryerson.ca/~blesser
>  ________________________________________
______________________________
>
>  ________________________________________
_______
> FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> To change your subscription options or search the archive:
> http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
> Brought to you by Fig Leaf Software
> Premier Authorized Adobe Consulting and Training
> http://www.figleaf.com
> http://training.figleaf.com
>=20


 ________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com

[ Post a follow-up to this message ]

Hi Dennis,
This morning I was able to reproduce what may be an intermittent problem
with Proxied Shared Object onSyncs using the following code:

<code from="...applications/RMSOMasterTest/main.asc">

so = SharedObject.get("test", true);
so.setProperty("hi", "bye " + Math.random());

application.onConnect = function(client){
trace("onConnect> client.referrer: " + client.referrer);
return true;
}

</code>

<code from="...applications/RMSOSlaveTest/main.asc">

nc = new NetConnection();
nc.onStatus = function(status){
for (var p in status) trace("nc.onStatus> status." + p + ": " +
status[p]);
}
trace("connect: " + nc.connect("rtmp://localhost/RMSOMasterTest"));

so = SharedObject.get("test", true, nc);
so.onSync = function(infoList){
for (var i = 0; i < infoList.length; i++){
var info = infoList[i];
for (var p in info) trace("onSync> " + i + ": info." + p + ": " +
info[p]);
}
}
so.onStatus = function(status){
for (var p in status) trace("so.onStatus> status." + p + ": " +
status[p]);
}

</code>

At one point, when I ran the slave app and reloaded it in the admin
console I got the following output:

Unloaded application instance RMSOSlaveTest/_definst_
connect: true
nc.onStatus> status.level: status
nc.onStatus> status.code: NetConnection.Connect.Success
nc.onStatus> status.description: Connection succeeded.
onSync> 0: info.code: change
onSync> 0: info.name: hi
onSync> 0: info.oldValue: undefined

Unloaded application instance RMSOSlaveTest/_definst_
connect: true
nc.onStatus> status.level: status
nc.onStatus> status.code: NetConnection.Connect.Success
nc.onStatus> status.description: Connection succeeded.
nc.onStatus> status.level: status
nc.onStatus> status.code: SharedObject.Proxy.Connect

The second time I did not get any onSync calls and did get a
SharedObject.Proxy.Connect call that I do not normally see! This
happened very rarely. Most of the time I got the onSync call and no
SharedObject.Proxy.Connect message. If anyone sees a problem/bug with my
code please let me know? Or is there a bug with the admin console so
that it might not report everything?? Otherwise this may be a bug in FMS
2.0.1

Yours truly,
-Brian

--
 ________________________________________
______________________________
Brian Lesser
Assistant Director, Teaching and Technology Support
Computing and Communications Services
Ryerson University
350 Victoria St.
Toronto, Ontario                   Phone: (416) 979-5000 ext. 6835
M5B 2K3                            Fax: (416) 979-5220
Office: AB48D                      E-mail: blesser-6s6ziW1YCwCw5LPnMra/2Q@pu
blic.gmane.org
(Enter through LB66)               Web: http://www.ryerson.ca/~blesser
 ________________________________________
______________________________

 ________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com

[ Post a follow-up to this message ]

just a follow up to my previous note. As an experiment I changed the
code so that the slave would not try to connect to the proxied so until
after the Netconnection was established. It made no difference. As
Dennies observed earlier, either the onSync is received or the
SharedObject.Proxy.Connect, but not both.

Here is the output:

connect: true
nc.onStatus> status.level: status
nc.onStatus> status.code: NetConnection.Connect.Success
nc.onStatus> status.description: Connection succeeded.
onSync> 0: info.code: change
onSync> 0: info.name: hi
onSync> 0: info.oldValue: undefined
Unloaded application instance RMSOSlaveTest/_definst_
connect: true
nc.onStatus> status.level: status
nc.onStatus> status.code: NetConnection.Connect.Success
nc.onStatus> status.description: Connection succeeded.
nc.onStatus> status.level: status
nc.onStatus> status.code: SharedObject.Proxy.Connect
Unloaded application instance RMSOSlaveTest/_definst_
connect: true
nc.onStatus> status.level: status
nc.onStatus> status.code: NetConnection.Connect.Success
nc.onStatus> status.description: Connection succeeded.
onSync> 0: info.code: change
onSync> 0: info.name: hi
onSync> 0: info.oldValue: undefined
Unloaded application instance RMSOSlaveTest/_definst_
connect: true
nc.onStatus> status.level: status
nc.onStatus> status.code: NetConnection.Connect.Success
nc.onStatus> status.description: Connection succeeded.
onSync> 0: info.code: change
onSync> 0: info.name: hi
onSync> 0: info.oldValue: undefined
Unloaded application instance RMSOSlaveTest/_definst_
connect: true
nc.onStatus> status.level: status
nc.onStatus> status.code: NetConnection.Connect.Success
nc.onStatus> status.description: Connection succeeded.
nc.onStatus> status.level: status
nc.onStatus> status.code: SharedObject.Proxy.Connect
Unloaded application instance RMSOSlaveTest/_definst_
connect: true
nc.onStatus> status.level: status
nc.onStatus> status.code: NetConnection.Connect.Success
nc.onStatus> status.description: Connection succeeded.
onSync> 0: info.code: change
onSync> 0: info.name: hi
onSync> 0: info.oldValue: undefined



--
 ________________________________________
______________________________
Brian Lesser
Assistant Director, Teaching and Technology Support
Computing and Communications Services
Ryerson University
350 Victoria St.
Toronto, Ontario                   Phone: (416) 979-5000 ext. 6835
M5B 2K3                            Fax: (416) 979-5220
Office: AB48D                      E-mail: blesser-6s6ziW1YCwCw5LPnMra/2Q@pu
blic.gmane.org
(Enter through LB66)               Web: http://www.ryerson.ca/~blesser
 ________________________________________
______________________________

 ________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com

[ Post a follow-up to this message ]

Hey Brian,

Again thanks for the time you'r taking for this..

The idea came to me that it might have something to do with the killing of
the application with the admin console beginning of this week.. but figured
it was a long shot?
If not we could do a little test to see if it is handlled differently when
killed with code..

I've did a few test deleting the RSO from the application folder seemed that
i get the proxy when i've deleted them..

For my own logics.. it's right that the proxy on the nc.onStatus is actually
from giving the nc to the SO.get to use as representative for a connection
to an application instance?
And not another event from the nc... because i found it a bit unlogic that
the onStatus of the nc was called instead of the onStatus of the SO..

As i'm stuck with this for a long time and a bit new to FMS.. i began
thinkingin crazy things like:
-is it possible that it is still a "ghost"  SO that it is trying to
reconnect to.. as there is with a wrong deletion of setInterval.. or
loadvars? .. and with that thought is it any use to try to connect it
"localy" instead of the proxy.. or delete the SO(on the slave) on
application.onAppStop?

I'll do some other test and come back to you on it..

Thanks again!

Cheers,

Dennis





----- Original Message -----
From: "Brian Lesser" <blesser-6s6ziW1YCwCw5LPnMra/2Q@public.gmane.org>
To: "FlashComm Mailing List" <flashcomm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@pub
lic.gmane.org>
Sent: Wednesday, June 07, 2006 2:46 PM
Subject: Re: [FlashComm] RSO and "SharedObject.Proxy.Connect"


> just a follow up to my previous note. As an experiment I changed the code
> so that the slave would not try to connect to the proxied so until after
> the Netconnection was established. It made no difference. As Dennies
> observed earlier, either the onSync is received or the
> SharedObject.Proxy.Connect, but not both.
>
> Here is the output:
>
> connect: true
> nc.onStatus> status.level: status
> nc.onStatus> status.code: NetConnection.Connect.Success
> nc.onStatus> status.description: Connection succeeded.
> onSync> 0: info.code: change
> onSync> 0: info.name: hi
> onSync> 0: info.oldValue: undefined
> Unloaded application instance RMSOSlaveTest/_definst_
> connect: true
> nc.onStatus> status.level: status
> nc.onStatus> status.code: NetConnection.Connect.Success
> nc.onStatus> status.description: Connection succeeded.
> nc.onStatus> status.level: status
> nc.onStatus> status.code: SharedObject.Proxy.Connect
> Unloaded application instance RMSOSlaveTest/_definst_
> connect: true
> nc.onStatus> status.level: status
> nc.onStatus> status.code: NetConnection.Connect.Success
> nc.onStatus> status.description: Connection succeeded.
> onSync> 0: info.code: change
> onSync> 0: info.name: hi
> onSync> 0: info.oldValue: undefined
> Unloaded application instance RMSOSlaveTest/_definst_
> connect: true
> nc.onStatus> status.level: status
> nc.onStatus> status.code: NetConnection.Connect.Success
> nc.onStatus> status.description: Connection succeeded.
> onSync> 0: info.code: change
> onSync> 0: info.name: hi
> onSync> 0: info.oldValue: undefined
> Unloaded application instance RMSOSlaveTest/_definst_
> connect: true
> nc.onStatus> status.level: status
> nc.onStatus> status.code: NetConnection.Connect.Success
> nc.onStatus> status.description: Connection succeeded.
> nc.onStatus> status.level: status
> nc.onStatus> status.code: SharedObject.Proxy.Connect
> Unloaded application instance RMSOSlaveTest/_definst_
> connect: true
> nc.onStatus> status.level: status
> nc.onStatus> status.code: NetConnection.Connect.Success
> nc.onStatus> status.description: Connection succeeded.
> onSync> 0: info.code: change
> onSync> 0: info.name: hi
> onSync> 0: info.oldValue: undefined
>
>
>
> --
>  ________________________________________
______________________________
> Brian Lesser
> Assistant Director, Teaching and Technology Support
> Computing and Communications Services
> Ryerson University
> 350 Victoria St.
> Toronto, Ontario                   Phone: (416) 979-5000 ext. 6835
> M5B 2K3                            Fax: (416) 979-5220
> Office: AB48D                      E-mail: blesser-6s6ziW1YCwCw5LPnMra/2Q@
public.gmane.org
> (Enter through LB66)               Web: http://www.ryerson.ca/~blesser
>  ________________________________________
______________________________
>
>  ________________________________________
_______
> FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
> To change your subscription options or search the archive:
> http://chattyfig.figleaf.com/mailman/listinfo/flashcomm
>
> Brought to you by Fig Leaf Software
> Premier Authorized Adobe Consulting and Training
> http://www.figleaf.com
> http://training.figleaf.com
>


 ________________________________________
_______
FlashComm-1Ss2GqJETD3yZ38Mhd3e/9ZfFG6BLHNm@public.gmane.org
To change your subscription options or search the archive:
http://chattyfig.figleaf.com/mailman/listinfo/flashcomm

Brought to you by Fig Leaf Software
Premier Authorized Adobe Consulting and Training
http://www.figleaf.com
http://training.figleaf.com

[ Post a follow-up to this message ]