 |
|
 |
|
|
 |
AD plugin on a W2k3 Domain |
 |
 |
|
|
06-13-06 06:11 PM
I'm trying to install the AD plugin and keep getting the following error:
Error:Setup failed to connect. Please enter your Host Name, Port Number, Dir
ectory Administrator DN and Password again!
I've verified these 100 times over and still no luck. This is the first tim
e I've tried this to a widnows 2003 domain. Any ideas?
Thanks in advance!!
 Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
 |
|
 |
|
 |
|
|
|
Re: AD plugin on a W2k3 Domain |
|
|
|
|
06-13-06 06:11 PM
Is there any pix between the CM and AD? If so, we ran into a problem
with the fixup 389.
________________________________
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Burton
Sent: Tuesday, June 13, 2006 7:43 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] AD plugin on a W2k3 Domain
I'm trying to install the AD plugin and keep getting the following
error:
Error:Setup failed to connect. Please enter your Host Name, Port Number,
Directory Administrator DN and Password again!
I've verified these 100 times over and still no luck. This is the first
time I've tried this to a widnows 2003 domain. Any ideas?
Thanks in advance!!
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: AD plugin on a W2k3 Domain |
|
|
|
|
06-13-06 06:11 PM
Nope, just a router on a stick.
From: Voll, Scott
Sent: Tue 6/13/2006 10:50 AM
To: Jason Burton; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
Is there any pix between the CM and AD? If so, we ran into a problem with t
he fixup 389.
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Jason Burton
Sent: Tuesday, June 13, 2006 7:43 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] AD plugin on a W2k3 Domain
I'm trying to install the AD plugin and keep getting the following error:
Error:Setup failed to connect. Please enter your Host Name, Port Number, Dir
ectory Administrator DN and Password again!
I've verified these 100 times over and still no luck. This is the first tim
e I've tried this to a widnows 2003 domain. Any ideas?
Thanks in advance!!
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: AD plugin on a W2k3 Domain |
|
|
|
|
06-13-06 06:11 PM
Get a sniffer capture, look at the ldap packets and see what's going on.
-Ryan
On Jun 13, 2006, at 10:52 AM, Jason Burton wrote:
Nope, just a router on a stick.
From: Voll, Scott
Sent: Tue 6/13/2006 10:50 AM
To: Jason Burton; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
Is there any pix between the CM and AD? If so, we ran into a problem
with the fixup 389.
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-
bounces@puck.nether.net] On Behalf Of Jason Burton
Sent: Tuesday, June 13, 2006 7:43 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] AD plugin on a W2k3 Domain
I'm trying to install the AD plugin and keep getting the following
error:
Error:Setup failed to connect. Please enter your Host Name, Port
Number, Directory Administrator DN and Password again!
I've verified these 100 times over and still no luck. This is the
first time I've tried this to a widnows 2003 domain. Any ideas?
Thanks in advance!!
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: AD plugin on a W2k3 Domain |
|
|
|
|
06-13-06 06:11 PM
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets should
help you see what the failure is.
Kevin
On Jun 13, 2006, at 10:52 AM, Jason Burton wrote:
> Nope, just a router on a stick.
>
> From: Voll, Scott
> Sent: Tue 6/13/2006 10:50 AM
> To: Jason Burton; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
>
> Is there any pix between the CM and AD?_ If so, we ran into a problem
> with the fixup 389.
> _
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Burton
> Sent: Tuesday, June 13, 2006 7:43 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] AD plugin on a W2k3 Domain
> _
> _I'm trying to install the AD plugin and keep getting the following
> error:
> _
> Error:Setup failed to connect. Please enter your Host Name, Port
> Number, Directory Administrator DN and Password again!
> _
> I've verified these 100 times over and still no luck._ This is the
> first time I've tried this to a widnows 2003 domain._ Any ideas?
> _
> Thanks in advance!!
> ________________________________________
________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: AD plugin on a W2k3 Domain |
|
|
|
|
06-13-06 06:11 PM
Thanks, downloading Ethereal now.
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets should
help you see what the failure is.
Kevin
On Jun 13, 2006, at 10:52 AM, Jason Burton wrote:
> Nope, just a router on a stick.
>
> From: Voll, Scott
> Sent: Tue 6/13/2006 10:50 AM
> To: Jason Burton; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
>
> Is there any pix between the CM and AD? If so, we ran into a problem
> with the fixup 389.
>
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Burton
> Sent: Tuesday, June 13, 2006 7:43 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] AD plugin on a W2k3 Domain
>
> I'm trying to install the AD plugin and keep getting the following
> error:
>
> Error:Setup failed to connect. Please enter your Host Name, Port
> Number, Directory Administrator DN and Password again!
>
> I've verified these 100 times over and still no luck. This is the
> first time I've tried this to a widnows 2003 domain. Any ideas?
>
> Thanks in advance!!
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: AD plugin on a W2k3 Domain |
|
|
|
|
06-13-06 06:11 PM
Well after doing the packet capture I'm getting invalid credentials error in
the Bind result.
It's LDAPErr DSID-0c09334. What is the correct format for AD Admin DN?
CN=USER, OU=Container, DC=domain, DC=Domain?
From: Jason Burton
Sent: Tue 6/13/2006 11:08 AM
To: Kevin Thorngren
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Thanks, downloading Ethereal now.
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets should
help you see what the failure is.
Kevin
On Jun 13, 2006, at 10:52 AM, Jason Burton wrote:
> Nope, just a router on a stick.
>
> From: Voll, Scott
> Sent: Tue 6/13/2006 10:50 AM
> To: Jason Burton; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] AD plugin on a W2k3 Domain
>
> Is there any pix between the CM and AD? If so, we ran into a problem
> with the fixup 389.
>
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jason Burton
> Sent: Tuesday, June 13, 2006 7:43 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] AD plugin on a W2k3 Domain
>
> I'm trying to install the AD plugin and keep getting the following
> error:
>
> Error:Setup failed to connect. Please enter your Host Name, Port
> Number, Directory Administrator DN and Password again!
>
> I've verified these 100 times over and still no luck. This is the
> first time I've tried this to a widnows 2003 domain. Any ideas?
>
> Thanks in advance!!
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: AD plugin on a W2k3 Domain |
|
|
|
|
06-13-06 06:11 PM
Try CN=user, CN=container,DC=domain,DC=com.
-Ryan
On Jun 13, 2006, at 11:46 AM, Jason Burton wrote:
Well after doing the packet capture I'm getting invalid credentials
error in the Bind result.
It's LDAPErr DSID-0c09334. What is the correct format for AD Admin DN?
CN=USER, OU=Container, DC=domain, DC=Domain?
From: Jason Burton
Sent: Tue 6/13/2006 11:08 AM
To: Kevin Thorngren
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Thanks, downloading Ethereal now.
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets
should help you see what the failure is. Kevin On Jun 13, 2006, at
10:52 AM, Jason Burton wrote: > Nope, just a router on a stick. > >
From: Voll, Scott > Sent: Tue 6/13/2006 10:50 AM > To: Jason Burton;
cisco-voip@puck.nether.net > Subject: RE: [cisco-voip] AD plugin on a
W2k3 Domain > > Is there any pix between the CM and AD? If so, we
ran into a problem > with the fixup 389. > > > From: cisco-voip-
bounces@puck.nether.net > [mailto:cisco-voip-bounces@puck.nether.net]
On Behalf Of Jason Burton > Sent: Tuesday, June 13, 2006 7:43 AM >
To: cisco-voip@puck.nether.net > Subject: [cisco-voip] AD plugin on a
W2k3 Domain > > I'm trying to install the AD plugin and keep
getting the following > error: > > Error:Setup failed to connect.
Please enter your Host Name, Port > Number, Directory Administrator
DN and Password again! > > I've verified these 100 times over and
still no luck. This is the > first time I've tried this to a widnows
2003 domain. Any ideas? > > Thanks in advance!! >
________________________________________
_______ > cisco-voip mailing
list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/
listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: AD plugin on a W2k3 Domain |
|
|
|
|
06-13-06 06:11 PM
Nope same result.
From: Ryan Ratliff
Sent: Tue 6/13/2006 11:51 AM
To: Jason Burton
Cc: Kevin Thorngren; cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Try CN=user, CN=container,DC=domain,DC=com.
-Ryan
On Jun 13, 2006, at 11:46 AM, Jason Burton wrote:
Well after doing the packet capture I'm getting invalid credentials
error in the Bind result.
It's LDAPErr DSID-0c09334. What is the correct format for AD Admin DN?
CN=USER, OU=Container, DC=domain, DC=Domain?
From: Jason Burton
Sent: Tue 6/13/2006 11:08 AM
To: Kevin Thorngren
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
Thanks, downloading Ethereal now.
From: Kevin Thorngren
Sent: Tue 6/13/2006 11:01 AM
To: Jason Burton
Cc: cisco-voip Voip
Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
The quickest way to isolate the issue is with a packet capture of the
Publisher when doing the AD Plugin. Looking at the LDAP packets
should help you see what the failure is. Kevin On Jun 13, 2006, at
10:52 AM, Jason Burton wrote: > Nope, just a router on a stick. > >
From: Voll, Scott > Sent: Tue 6/13/2006 10:50 AM > To: Jason Burton;
cisco-voip@puck.nether.net > Subject: RE: [cisco-voip] AD plugin on a
W2k3 Domain > > Is there any pix between the CM and AD? If so, we
ran into a problem > with the fixup 389. > > > From: cisco-voip-
bounces@puck.nether.net > [mailto:cisco-voip-bounces@puck.nether.net]
On Behalf Of Jason Burton > Sent: Tuesday, June 13, 2006 7:43 AM >
To: cisco-voip@puck.nether.net > Subject: [cisco-voip] AD plugin on a
W2k3 Domain > > I'm trying to install the AD plugin and keep
getting the following > error: > > Error:Setup failed to connect.
Please enter your Host Name, Port > Number, Directory Administrator
DN and Password again! > > I've verified these 100 times over and
still no luck. This is the > first time I've tried this to a widnows
2003 domain. Any ideas? > > Thanks in advance!! >
________________________________________
_______ > cisco-voip mailing
list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/
listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: AD plugin on a W2k3 Domain |
|
|
|
|
06-13-06 06:11 PM
The format you use depends on the Object Class of each Container.
Object Class of the container using the following steps:
- Open Active Directory Users and Computers
- Click on View and check mark Advanced Features
- Right click on each container and select Properties
- Select the Object tab
Note the object class for each container and use that to build your
Admin DN.
Kevin
On Jun 13, 2006, at 11:55 AM, Jason Burton wrote:
> Nope same result.
>
> From: Ryan Ratliff
> Sent: Tue 6/13/2006 11:51 AM
> To: Jason Burton
> Cc: Kevin Thorngren; cisco-voip Voip
> Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
>
> Try CN=user, CN=container,DC=domain,DC=com.
>
>
> -Ryan
>
> On Jun 13, 2006, at 11:46 AM, Jason Burton wrote:
>
> Well after doing the packet capture I'm getting invalid credentials
> error in the Bind result.
>
> It's LDAPErr DSID-0c09334. What is the correct format for AD Admin DN?
>
> CN=USER, OU=Container, DC=domain, DC=Domain?
>
> From: Jason Burton
> Sent: Tue 6/13/2006 11:08 AM
> To: Kevin Thorngren
> Cc: cisco-voip Voip
> Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
>
> Thanks, downloading Ethereal now.
>
> From: Kevin Thorngren
> Sent: Tue 6/13/2006 11:01 AM
> To: Jason Burton
> Cc: cisco-voip Voip
> Subject: Re: [cisco-voip] AD plugin on a W2k3 Domain
>
> The quickest way to isolate the issue is with a packet capture of the
> Publisher when doing the AD Plugin. Looking at the LDAP packets
> should help you see what the failure is. Kevin On Jun 13, 2006, at
> 10:52 AM, Jason Burton wrote: > Nope, just a router on a stick. > >
> From: Voll, Scott > Sent: Tue 6/13/2006 10:50 AM > To: Jason Burton;
> cisco-voip@puck.nether.net > Subject: RE: [cisco-voip] AD plugin on a
> W2k3 Domain > > Is there any pix between the CM and AD? If so, we
> ran into a problem > with the fixup 389. > > > From: cisco-voip-
> bounces@puck.nether.net > [mailto:cisco-voip-bounces@puck.nether.net]
> On Behalf Of Jason Burton > Sent: Tuesday, June 13, 2006 7:43 AM >
> To: cisco-voip@puck.nether.net > Subject: [cisco-voip] AD plugin on a
> W2k3 Domain > > I'm trying to install the AD plugin and keep
> getting the following > error: > > Error:Setup failed to connect.
> Please enter your Host Name, Port > Number, Directory Administrator
> DN and Password again! > > I've verified these 100 times over and
> still no luck. This is the > first time I've tried this to a widnows
> 2003 domain. Any ideas? > > Thanks in advance!! >
> ________________________________________
_______ > cisco-voip mailing
> list > cisco-voip@puck.nether.net > https://puck.nether.net/mailman/
> listinfo/cisco-voip
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
Attachment:
This has been downloaded 0 time(s).
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Sponsored Links |
|
|
|
|
 |
All times are GMT. The time now is 12:34 PM. |
 |
|
|
 |
|
 |
|
|
 |
|
Forum Rules:
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is OFF
vB code is ON
Smilies are ON
[IMG] code is OFF
|
|
|
|
Medical and Health forum | Computer Games Reviews | Graphics design forum
|
 |
|
 |
|
