06-27-06 12:11 PM
It's been a while since I've done Avaya, but I do remember a few things.
The phones support 802.1q trunking/VLAN setup.
They require some configuration in DHCP to work.
Complete documentation on how to setup an Avaya phone can be found here:
http://support.avaya.com/elmodocs2/...tput/index.html
That link can answer all of your questions in detail. Avaya used to
have a configuration paper on how to do this, but I cannot seem to
locate it now.
----- Original Message -----
From: "Carter, Bill" <bcarter@sentinel.com>
Date: Monday, June 26, 2006 8:20 pm
Subject: Re: [cisco-voip] Basic VOIP Setup Needs
To: "Dixon, Wayne" <wcdixo@aurora.lib.il.us>
Cc: cisco-voip@puck.nether.net
> Sorry about the Avaya thing. Is this related to Messenger Library?
>
>
>
> ________________________________
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Ed Leatherman
> Sent: Monday, June 26, 2006 10:30 AM
> To: Dixon, Wayne
> Cc: Voll, Scott; cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] Basic VOIP Setup Needs
>
>
> Ah!~ scratch my suggestion about the SRND for callmanager then
>  It might still have some tidbits on QoS and switches in there
> but its
> mostly relating to callmanager.
>
>
> On 6/26/06, Dixon, Wayne <wcdixo@aurora.lib.il.us> wrote:
>
> The Switches are 3500XLs... It is an Avaya system, and
> call managing will be handled by that and forgive my ignorance, but
> whatis A VGW? Voice Gateway?
>
> If it is a Voice Gateway, then we're still awaiting that
> to come in, we just ordered that last week.. but I was asked to see
> whatwould be needed to get the network ready for IP Phones
>
>
> Wayne
>
>
>
> -----Original Message-----
> From: Voll, Scott [mailto:Scott.Voll@wesd.org]
> Sent: Monday, June 26, 2006 9:50 AM
> To: Dixon, Wayne; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] Basic VOIP Setup Needs
>
>
>
>
> What kind of Switch?
>
>
>
> Do you already have CM and VGW's setup?
>
>
>
> Scott
>
>
>
>
> ________________________________
>
>
> From: cisco-voip-bounces@puck.nether.net
> [mailto: cisco-voip-bounces@puck.nether.net
> <mailto:cisco-voip-bounces@puck.nether.net> ] On Behalf Of Dixon,
> Wayne Sent: Monday, June 26, 2006 7:24 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] Basic VOIP Setup Needs
>
>
>
> Hi all,
>
>
>
> I'm wondering what basics are needed for
> allowing IP Phones access on a cisco Switch network... We are
> lookingat implementing some IP Phones.
>
>
>
> I'm assuming that a Dedicated VLAN for the IP
> Phones, use of Native VLAN for non-tagged packets and a DHCP server
> areneeded... but I'm not sure what else is needed.
>
>
>
> If anybody has a good source for some basic
> information on basic VOIP setup would be greatly appreciated.
>
>
>
> Thanks
>
>
>
> Wayne
>
>
>
>
> _______________________________________
________
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>
>
>
> --
> Ed Leatherman
> IP Telephony Coordinator
> West Virginia University
> Telecommunications and Network Operations
>
>
>
> This email may contain proprietary and confidential information for
> the sole use of the intended recipient.
> Any review, retransmission, dissemination, or other use of this
> information by persons or entities other than
> the intended recipient is prohibited. If you are not the intended
> recipient, please contact the sender and
> delete all copies. To the extent that opinions are expressed in
> this message, they are not necessarily the
> opinions of Sentinel Technologies or any of its affiliates,
> employees, directors, officers or shareholders.
>
[ Post a follow-up to this message ]
| 
Attachment: 
