I'm working with a customer that's experiencing this; phone A and phone B
share a line appearance of 1234.  Phone A takes a call and starts talking to
the other party.  At some point during the call, the call goes dead and
rings over to the same 1234 appearance on Phone B without any input from the
caller on Phone A.  The phone load is 8.0(3), phones affected are 7940/60,
and CallManager version is 4.1(3)SR3b.  Ideas?

Attachment:
This has been downloaded 0 time(s).

[ Post a follow-up to this message ]

Sounds very strange.  Are you sure that the user of Phone A is not =

doing anything with the call?  I have had cases where I am told they =

are not doing anything.  I look at the CCM traces and find differently =

:-)  You will probably need to look at detailed CCM traces of the event =

to see what is happening.

Kevin
On Jul 17, 2006, at 12:33 PM, John Parduhn wrote:

> I'm working with a customer that's experiencing this;=A0phone =

> A=A0and=A0phone B share a line appearance of 1234.=A0=A0Phone A takes a c=
all =

> and starts talking to the other party.=A0 At some point during the call, =

> the call goes dead and rings over to the same 1234 appearance on Phone =

> B without any input from the caller on Phone A.=A0 The phone load is =

> 8.0(3), phones affected are 7940/60, and CallManager version is =

> 4.1(3)SR3b.=A0 Ideas? ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]