Does anyone know of a parameter that can be changed so that when someone
parks a call the park # stays on the phone display longer than 5
seconds? 
 

DAP

Network Admin/IT Manager 
The RiverBank 

[ Post a follow-up to this message ]

Change the Call Park Display Timer in CallManager Service Parameters, the
default is 10 secs.

"This is a generic timer which provides the flexibility to change the
duration of Call Park Number display and other notification displays on the
IP phone. A value of 0 causes the message to be displayed until it is
overwritten by another message of equal or higher priority. Specify a value
that is less than or equal to the value that is specified for the Call Park
Reversion Timer service parameter; if the value is not less, the call park
display will be overwritten after the call park reversion time expires. This
parameter applies to cisco IP Phone models 7940, 7960, and newer."



Jonathan


On 11/21/06, Duane Priebe <duane@theriverbank.com> wrote:
>
>  Does anyone know of a parameter that can be changed so that when someone
> parks a call the park # stays on the phone display longer than 5 seconds?
>
>
> DAP
>
> Network Admin/IT Manager
> The RiverBank
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>

[ Post a follow-up to this message ]

in 4.1.3sr3c

Clusterwide Parameters (Feature - General) 
Call Park Display Timer : This is a generic timer which provides the flexibi
lity to change the duration of Call Park Number display and other notificati
on displays on the IP phone. A value of 0 causes the message to be displayed
 until it is overwritten by another message of equal or higher priority. Spe
cify a value that is less than or equal to the value that is specified for t
he Call Park Reversion Timer service parameter; if the value is not less, th
e call park display will be overwritten after the call park reversion time e
xpires. This parameter applies to cisco IP Phone models 7940, 7960, and newe
r. 
This is a required field.
Default: 10.
Unit: sec.
Minimum: 0.
Maximum: 100.
 
Call Park Reversion Timer : This parameter specifies the number of seconds t
o wait before returning a parked party to the user who parked the call. Make
 sure that the Call Park Display Timer value is less than or equal to the va
lue that is specified for the Call Park Reversion Timer; if it is not, the c
all park display will be overwritten after the call park reversion time expi
res. 
This is a required field.
Default: 60.
Unit: sec.
Minimum: 30.
Maximum: 1000.
 

----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message ----- 
From: Duane Priebe 
To: cisco-voip@puck.nether.net 
Sent: Tuesday, November 21, 2006 1:15 PM
Subject: [cisco-voip] Parked line # display on phones


Does anyone know of a parameter that can be changed so that when someone par
ks a call the park # stays on the phone display longer than 5 seconds? 

DAP

Network Admin/IT Manager 
The RiverBank 




----------------------------------------------------------------------------
--


 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]