 |
|
 |
|
|
 |
CCM shared line like in CME |
 |
 |
|
|
01-05-07 12:11 AM
Hi,
Is it possible to configure the "big" CCM (4.x) to have a shared line
feature assigned to a button?
I am creating these shared lines on CME this way:
ephone-dn 1
number 1000
ephone-dn 2
number 1001
ephone 1
mac-address 1234.5678.1234
type 7940
button 1o1,2
But in CCM configuration I can't see a possibility to assign another DN to a
line.
Do you have any suggestion please?
Thank you.
Best regards,
Jozef Janitor
[ Post a follow-up to this message ]
|
|
|
 |
|
 |
|
 |
|
|
|
Re: CCM shared line like in CME |
|
|
|
|
01-05-07 12:11 AM
I don't think there is a native feature for this, but you could use translat
ions and or CTI route points forwarded to the 'real' line. Each has there ad
vantages and behaviours. If you are migrating from CME to CCM then you might
notice some differences.
What do you see on the phone?
----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message -----
From: Jozef Janitor
To: cisco-voip@puck.nether.net
Sent: Thursday, January 04, 2007 2:56 PM
Subject: [cisco-voip] CCM shared line like in CME
Hi,
Is it possible to configure the "big" CCM (4.x) to have a shared line featur
e assigned to a button?
I am creating these shared lines on CME this way:
ephone-dn 1
number 1000
ephone-dn 2
number 1001
ephone 1
mac-address 1234.5678.1234
type 7940
button 1o1,2
But in CCM configuration I can't see a possibility to assign another DN to a
line.
Do you have any suggestion please?
Thank you.
Best regards,
Jozef Janitor
----------------------------------------------------------------------------
--
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CCM shared line like in CME |
|
|
|
|
01-05-07 12:11 AM
Just out of curiosity, what is it you are trying to do?
The only time I have used an overlay button in CME was to simulate the
operation of a broadcast hunt group that is native to CM, but not in
CME.
-Patrick
----- Original Message -----
From: Jozef Janitor
To: cisco-voip@puck.nether.net
Sent: Thursday, January 04, 2007 2:56 PM
Subject: [cisco-voip] CCM shared line like in CME
Hi,
Is it possible to configure the "big" CCM (4.x) to have a shared line
feature assigned to a button?
I am creating these shared lines on CME this way:
ephone-dn 1
number 1000
ephone-dn 2
number 1001
ephone 1
mac-address 1234.5678.1234
type 7940
button 1o1,2
But in CCM configuration I can't see a possibility to assign another
DN to a line.
Do you have any suggestion please?
Thank you.
Best regards,
Jozef Janitor
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CCM shared line like in CME |
|
|
|
|
01-05-07 12:11 AM
We have an office where each of us has its own IP phone at the desk with own
extension, but we would like also to have one shared number for this office.
There are already no free buttons on the phones, so that's the reason why I
would like to have to one button assigned two extensions.
Is it possible?
Thank you.
Jozef
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-
> bounces@puck.nether.net] On Behalf Of Patrick Mowry
> Sent: Thursday, January 04, 2007 11:13 PM
> To: cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] CCM shared line like in CME
>
> Just out of curiosity, what is it you are trying to do?
> The only time I have used an overlay button in CME was to simulate the
> operation of a broadcast hunt group that is native to CM, but not in
> CME.
>
> -Patrick
>
> ----- Original Message -----
> From: Jozef Janitor
> To: cisco-voip@puck.nether.net
> Sent: Thursday, January 04, 2007 2:56 PM
> Subject: [cisco-voip] CCM shared line like in CME
>
>
> Hi,
>
>
>
> Is it possible to configure the "big" CCM (4.x) to have a shared line
> feature assigned to a button?
>
> I am creating these shared lines on CME this way:
>
>
>
> ephone-dn 1
>
> number 1000
>
> ephone-dn 2
>
> number 1001
>
> ephone 1
>
> mac-address 1234.5678.1234
>
> type 7940
>
> button 1o1,2
>
>
>
> But in CCM configuration I can't see a possibility to assign another
> DN to a line.
>
> Do you have any suggestion please?
>
>
>
> Thank you.
>
>
>
> Best regards,
>
> Jozef Janitor
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CCM shared line like in CME |
|
|
|
|
01-05-07 12:11 AM
Setup a Broad cast LineGroup... assign it to a Hunt Group and then to a
Hunt pilot. It will work much the same way.
Scott
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jozef Janitor
Sent: Thursday, January 04, 2007 2:43 PM
To: 'Patrick Mowry'; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM shared line like in CME
We have an office where each of us has its own IP phone at the desk with
own
extension, but we would like also to have one shared number for this
office.
There are already no free buttons on the phones, so that's the reason
why I
would like to have to one button assigned two extensions.
Is it possible?
Thank you.
Jozef
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-
> bounces@puck.nether.net] On Behalf Of Patrick Mowry
> Sent: Thursday, January 04, 2007 11:13 PM
> To: cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] CCM shared line like in CME
>
> Just out of curiosity, what is it you are trying to do?
> The only time I have used an overlay button in CME was to simulate the
> operation of a broadcast hunt group that is native to CM, but not in
> CME.
>
> -Patrick
>
> ----- Original Message -----
> From: Jozef Janitor
> To: cisco-voip@puck.nether.net
> Sent: Thursday, January 04, 2007 2:56 PM
> Subject: [cisco-voip] CCM shared line like in CME
>
>
> Hi,
>
>
>
> Is it possible to configure the "big" CCM (4.x) to have a shared
line
> feature assigned to a button?
>
> I am creating these shared lines on CME this way:
>
>
>
> ephone-dn 1
>
> number 1000
>
> ephone-dn 2
>
> number 1001
>
> ephone 1
>
> mac-address 1234.5678.1234
>
> type 7940
>
> button 1o1,2
>
>
>
> But in CCM configuration I can't see a possibility to assign another
> DN to a line.
>
> Do you have any suggestion please?
>
>
>
> Thank you.
>
>
>
> Best regards,
>
> Jozef Janitor
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CCM shared line like in CME |
|
|
|
|
01-05-07 12:11 AM
That's the way I would do it too.
-Patrick
-----Original Message-----
From: Voll, Scott [mailto:Scott.Voll@wesd.org]
Sent: Thursday, January 04, 2007 4:58 PM
To: Jozef Janitor; Patrick Mowry; cisco-voip@puck.nether.net
Subject: RE: [cisco-voip] CCM shared line like in CME
Setup a Broad cast LineGroup... assign it to a Hunt Group and then to a
Hunt pilot. It will work much the same way.
Scott
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jozef Janitor
Sent: Thursday, January 04, 2007 2:43 PM
To: 'Patrick Mowry'; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM shared line like in CME
We have an office where each of us has its own IP phone at the desk with
own
extension, but we would like also to have one shared number for this
office.
There are already no free buttons on the phones, so that's the reason
why I
would like to have to one button assigned two extensions.
Is it possible?
Thank you.
Jozef
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-
> bounces@puck.nether.net] On Behalf Of Patrick Mowry
> Sent: Thursday, January 04, 2007 11:13 PM
> To: cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] CCM shared line like in CME
>
> Just out of curiosity, what is it you are trying to do?
> The only time I have used an overlay button in CME was to simulate the
> operation of a broadcast hunt group that is native to CM, but not in
> CME.
>
> -Patrick
>
> ----- Original Message -----
> From: Jozef Janitor
> To: cisco-voip@puck.nether.net
> Sent: Thursday, January 04, 2007 2:56 PM
> Subject: [cisco-voip] CCM shared line like in CME
>
>
> Hi,
>
>
>
> Is it possible to configure the "big" CCM (4.x) to have a shared
line
> feature assigned to a button?
>
> I am creating these shared lines on CME this way:
>
>
>
> ephone-dn 1
>
> number 1000
>
> ephone-dn 2
>
> number 1001
>
> ephone 1
>
> mac-address 1234.5678.1234
>
> type 7940
>
> button 1o1,2
>
>
>
> But in CCM configuration I can't see a possibility to assign another
> DN to a line.
>
> Do you have any suggestion please?
>
>
>
> Thank you.
>
>
>
> Best regards,
>
> Jozef Janitor
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CCM shared line like in CME |
|
|
|
|
01-05-07 12:11 AM
Thank you Scott.
Have a nice day.
Jozef
> -----Original Message-----
> From: Voll, Scott [mailto:Scott.Voll@wesd.org]
> Sent: Thursday, January 04, 2007 11:58 PM
> To: Jozef Janitor; Patrick Mowry; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] CCM shared line like in CME
>
> Setup a Broad cast LineGroup... assign it to a Hunt Group and then to a
> Hunt pilot. It will work much the same way.
>
> Scott
>
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jozef Janitor
> Sent: Thursday, January 04, 2007 2:43 PM
> To: 'Patrick Mowry'; cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] CCM shared line like in CME
>
> We have an office where each of us has its own IP phone at the desk
> with
> own
> extension, but we would like also to have one shared number for this
> office.
>
> There are already no free buttons on the phones, so that's the reason
> why I
> would like to have to one button assigned two extensions.
>
> Is it possible?
>
> Thank you.
>
> Jozef
>
>
> the
> line
> another
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CCM shared line like in CME |
|
|
|
|
01-05-07 12:11 AM
Thank you Patrick too 
Jozef
> -----Original Message-----
> From: Patrick Mowry [mailto:pmowry@getgds.com]
> Sent: Friday, January 05, 2007 12:01 AM
> To: Voll, Scott; Jozef Janitor; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] CCM shared line like in CME
>
> That's the way I would do it too.
>
> -Patrick
>
> -----Original Message-----
> From: Voll, Scott [mailto:Scott.Voll@wesd.org]
> Sent: Thursday, January 04, 2007 4:58 PM
> To: Jozef Janitor; Patrick Mowry; cisco-voip@puck.nether.net
> Subject: RE: [cisco-voip] CCM shared line like in CME
>
> Setup a Broad cast LineGroup... assign it to a Hunt Group and then to a
> Hunt pilot. It will work much the same way.
>
> Scott
>
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jozef Janitor
> Sent: Thursday, January 04, 2007 2:43 PM
> To: 'Patrick Mowry'; cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] CCM shared line like in CME
>
> We have an office where each of us has its own IP phone at the desk
> with
> own
> extension, but we would like also to have one shared number for this
> office.
>
> There are already no free buttons on the phones, so that's the reason
> why I
> would like to have to one button assigned two extensions.
>
> Is it possible?
>
> Thank you.
>
> Jozef
>
>
> the
> line
> another
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CCM shared line like in CME |
|
|
|
|
01-05-07 12:11 PM
Hi, I have handled it with line group/hunt list/route pattern as it was
recommended here by Scott.
All the best,
Jozef
From: Lelio Fulgenzi [mailto:lelio@uoguelph.ca]
Sent: Thursday, January 04, 2007 9:07 PM
To: Jozef Janitor; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM shared line like in CME
I don't think there is a native feature for this, but you could use
translations and or CTI route points forwarded to the 'real' line. Each has
there advantages and behaviours. If you are migrating from CME to CCM then
you might notice some differences.
What do you see on the phone?
----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"I can eat fifty eggs." "Nobody can eat fifty eggs."
----- Original Message -----
From: Jozef Janitor <mailto:jozjan@cnl.tuke.sk>
To: cisco-voip@puck.nether.net
Sent: Thursday, January 04, 2007 2:56 PM
Subject: [cisco-voip] CCM shared line like in CME
Hi,
Is it possible to configure the "big" CCM (4.x) to have a shared line
feature assigned to a button?
I am creating these shared lines on CME this way:
ephone-dn 1
number 1000
ephone-dn 2
number 1001
ephone 1
mac-address 1234.5678.1234
type 7940
button 1o1,2
But in CCM configuration I can't see a possibility to assign another DN to a
line.
Do you have any suggestion please?
Thank you.
Best regards,
Jozef Janitor
_____
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Sponsored Links |
|
|
|
|
 |
All times are GMT. The time now is 12:45 AM. |
 |
|
|
 |
|
 |
|
|
 |
|
Forum Rules:
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is OFF
vB code is ON
Smilies are ON
[IMG] code is OFF
|
|
|
|
Medical and Health forum | Computer Games Reviews | Graphics design forum
|
 |
|
 |
|
