Can anyone reference a SRND/CCO article on best practice for binding the RTP
 audio stream?

For small branch offices I've always used same L3 interface (voice vlan) as 
the 7900 IP Phones for binding the RTP audio stream (versus using a Loopback
), this way you don't have to route (if source was loopback) any RTP packets
 for local calls out the local POTS PRI interface. Use the same interface fo
r SRST under "call-manager-fallback, ip source-address x.y.z.a" and CCMAdmin
 > SRST
 
 
mgcp bind control source-interface FastEthernet0/0.408
mgcp bind media source-interface FastEthernet0/0.408 


 



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately byreplying to this message and deleting it
from your computer. Thank you.

[ Post a follow-up to this message ]