i am fairly new on voip.  but reading to get better.

i have user complaining that they get busy signal but only a few (less thatn
10) are on the phone.  they have a pri line.  so this is what i did to
trouble shoot.

i associate myself to their partition and css.
the gateway is in the same same partition.
i make a call and execute "show voice port summary"

is there any way i can see which line i am using?  even debug but i want to
stay away from debug.


thanks

[ Post a follow-up to this message ]

Debug isdn q931 will give you a lot of information for this kind of
problem.

 

Scott

 

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of kevin k
Sent: Wednesday, January 31, 2007 6:30 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] voice gateway - trace a call

 

i am fairly new on voip.  but reading to get better.

 

i have user complaining that they get busy signal but only a few (less
thatn 10) are on the phone.  they have a pri line.  so this is what i
did to trouble shoot.

 

i associate myself to their partition and css.

the gateway is in the same same partition.

i make a call and execute "show voice port summary"

 

is there any way i can see which line i am using?  even debug but i want
to stay away from debug.  

 

 

thanks

[ Post a follow-up to this message ]

i am seeing only "debug" so far.  so is there any regular and safe "show"
command?  it would be very cool if so.

On 1/31/07, Voll, Scott <Scott.Voll@wesd.org> wrote:
>
>  Debug isdn q931 will give you a lot of information for this kind of
> problem.
>
>
>
> Scott
>
>
>  ------------------------------
>
> *From:* cisco-voip-bounces@puck.nether.net [mailto:
> cisco-voip-bounces@puck.nether.net] *On Behalf Of *kevin k
> *Sent:* Wednesday, January 31, 2007 6:30 AM
> *To:* cisco-voip@puck.nether.net
> *Subject:* [cisco-voip] voice gateway - trace a call
>
>
>
> i am fairly new on voip.  but reading to get better.
>
>
>
> i have user complaining that they get busy signal but only a few (less
> thatn 10) are on the phone.  they have a pri line.  so this is what i did 
to
> trouble shoot.
>
>
>
> i associate myself to their partition and css.
>
> the gateway is in the same same partition.
>
> i make a call and execute "show voice port summary"
>
>
>
> is there any way i can see which line i am using?  even debug but i want
> to stay away from debug.
>
>
>
>
>
> thanks
>

[ Post a follow-up to this message ]

The 'debug isdn q931' is a very low-impact debug.   You can safely
run it without fear of rebooting your router 

-Ryan

On Jan 31, 2007, at 11:34 AM, kevin k wrote:

i am seeing only "debug" so far.  so is there any regular and safe
"show" command?  it would be very cool if so.

On 1/31/07, Voll, Scott <Scott.Voll@wesd.org> wrote:
Debug isdn q931 will give you a lot of information for this kind of
problem.


Scott


From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-
bounces@puck.nether.net] On Behalf Of kevin k
Sent: Wednesday, January 31, 2007 6:30 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] voice gateway - trace a call


i am fairly new on voip.  but reading to get better.


i have user complaining that they get busy signal but only a few
(less thatn 10) are on the phone.  they have a pri line.  so this is
what i did to trouble shoot.


i associate myself to their partition and css.

the gateway is in the same same partition.

i make a call and execute "show voice port summary"


is there any way i can see which line i am using?  even debug but i
want to stay away from debug.



thanks


 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]