Does anyone know of a way to simulate the cisco USB eToken or
otherwise use the voice and signalling encryption features of CCM4.1
(3) without an eToken?

I'd like to do some testing in my lab and I do not have a real eToken.

tm

Tim Medley
Moxie Enterprises
Email: tim.medley@moxieent.com
Phone: (704) 905-4604

[ Post a follow-up to this message ]

You are going to need a eToken and the software to reset your token for
each lab test.  Call Aladdin and speak with sales, one of the managers
offered to provide me with software for this exact scenario during
Networkers at their booth. Aladdin is the OEM.

 

http://www.aladdin.com/eToken/

 

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Tim Medley
Sent: Wednesday, January 31, 2007 4:13 PM
To: cisco-voip@puck-nether.net
Subject: [cisco-voip] CCM 4.1 USB eToken

 

Does anyone know of a way to simulate the cisco USB eToken or otherwise
use the voice and signalling encryption features of CCM4.1(3) without an
eToken?

 

I'd like to do some testing in my lab and I do not have a real eToken.

 

tm

 

Tim Medley

Moxie Enterprises

Email: tim.medley@moxieent.com

Phone: (704) 905-4604

 

 





 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, youare hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictlyprohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message anddeleting it
from your computer. Thank you.

[ Post a follow-up to this message ]

I went down this road a year ago and no luck without
the actual etokens. I finally borrowed some and got it
to work on vmware lab.
Also, a word of advice, once the phone downloads the
token it will have a hard time registering if the
feature is disabled or it's moved to a new platform.
Took me a while to figure that out after I got done
playing with CTL. You need to go to each phone and
manually erase the token so that it will register.


--- Tim Medley <tim.medley@moxieent.com> wrote:

> Does anyone know of a way to simulate the cisco USB
> eToken or
> otherwise use the voice and signalling encryption
> features of CCM4.1
> (3) without an eToken?
>
> I'd like to do some testing in my lab and I do not
> have a real eToken.
>
> tm
>
> Tim Medley
> Moxie Enterprises
> Email: tim.medley@moxieent.com
> Phone: (704) 905-4604
>
>
>
> 
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>




 ________________________________________
____________________________________
________
Never miss an email again!
Yahoo! Toolbar alerts you the instant new Mail arrives.
http://tools.search.yahoo.com/toolbar/features/mail/

[ Post a follow-up to this message ]