What is your experience debugging WP6.0 with RAD7. In my case server takes g
ood
30 min or so to come up, publishing takes long too and server usually crache
s after publishing is done. ??

[ Post a follow-up to this message ]

I had the same issues when i tried it, but I didn't have the patience to wai
t for 30'. My guess would be that there are things that time-out, hence the 
delay.

[ Post a follow-up to this message ]

there is got to be a way to do debugging in a reasonable fashion ...

[ Post a follow-up to this message ]

Hi,

I can debug portlets in WPS 6.0 with RAD7. Ok, the portal take a long time t
o start up, but after that I could debug without problems. Do you have all  
updates of RAD7 and WPS 6.0 (6.0.0.1)?
By the way, in my computer the portal takes less than 10 minutes to start up
. My computer is a P4 3.0 with 2Gb RAM. My experience tells me that a comput
er with 1,5Gb RAM or less is not the ideal machine to run RAD7 and WPS 6.0 a
t the same time! A good dis
k is important to. I have a RAID 0 system with 2 disks of 7200RPM and the st
art up time is about 2/3 of the time in machine with a single disk 
Best regards,

Helder Sousa

[ Post a follow-up to this message ]

Anyone aware of debugging portlet/portal application on a remote server. I h
ave a remote portal server(WPS 6) configured and am not able to perform a De
bug on it from RAD 7. The moment i say Debug on Server for a portal project 
it tries for restart that
server and because remote server cannot be started from within RAD it fails.

[ Post a follow-up to this message ]

Start the server first and then do Run on server in RAD. This will publish y
our code to already running server.

[ Post a follow-up to this message ]

I have P4 2Ghz 2Gb. Did you remove/disable any out-of the box portal applica
tions to make startup faster ?

[ Post a follow-up to this message ]

No, I don't.
I have already think about it to reduce start up time. But then I analyze lo
gs and the applications installed and I see that there is about 40 portlets 
application that can be unninstalled in a test environment.
The problem is that I analyze the time wasted to start each portlet applicat
ion in logs and it will only reduce the start time in about 90/120 seconds (
2 minutes in 10 or 20 is nothing).
This is not cientific! I never try to confirm this values.. I just do some c
alculations.
Best regards,

Hélder Sousa

[ Post a follow-up to this message ]

My question was specifically on how to use the Debug on Server, not Run on S
erver.  I am able to use Run on Server, but for Debug on Server the issue is
 that RAD tries to re-start the server and because a WPS 6 remote server can
not be started from within
RAD it fails.

[ Post a follow-up to this message ]