I am inquiring as to anyone out there who has configured non cisco phones to
connect to a 2610XM routers. I am running
c2600-adventerprisek9-mz.124-7.bin. I have configured the POTS side of this
and it works great but I would like to have non cisco phones register via
the router. I have Polycom and softsets that I would like to get working. I
am also trying to set up a failover SIP trunk to our Asterisk box with the
same router. Can anyone out there provide me any insight on how you got
these two things working? I have been Googling all day and ran into some
hints but its not quite working.

Thanks!

Curt

[ Post a follow-up to this message ]

I got a bunch of H.323 endpoints to register via a Gatekeeper... But that is
really the only way I know of.



Jonathan

On 3/15/07, Curt Shaffer <cshaffer@gmail.com> wrote:
>
> I am inquiring as to anyone out there who has configured non cisco phones
> to
> connect to a 2610XM routers. I am running
> c2600-adventerprisek9-mz.124-7.bin. I have configured the POTS side of
> this
> and it works great but I would like to have non cisco phones register via
> the router. I have Polycom and softsets that I would like to get working.
> I
> am also trying to set up a failover SIP trunk to our Asterisk box with the
> same router. Can anyone out there provide me any insight on how you got
> these two things working? I have been Googling all day and ran into some
> hints but its not quite working.
>
> Thanks!
>
> Curt
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

[ Post a follow-up to this message ]

That sounds like something that is going to be a lot
more trouble than it's worth if anything goes wrong as
I'm sure TAC will say, "That's not a supported
configuration." and hang up.

If you want to use non-Cisco IP phones, you could
probably install the SCCP driver on Asterisk to get
them to register with it instead.

--- Curt Shaffer <cshaffer@gmail.com> wrote:

> I am inquiring as to anyone out there who has
> configured non cisco phones to
> connect to a 2610XM routers. I am running
> c2600-adventerprisek9-mz.124-7.bin. I have
> configured the POTS side of this
> and it works great but I would like to have non
> cisco phones register via
> the router. I have Polycom and softsets that I would
> like to get working. I
> am also trying to set up a failover SIP trunk to our
> Asterisk box with the
> same router. Can anyone out there provide me any
> insight on how you got
> these two things working? I have been Googling all
> day and ran into some
> hints but its not quite working.
>
> Thanks!
>
> Curt
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>




 ________________________________________
____________________________________
________
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL

[ Post a follow-up to this message ]