Hi There,


I am trying to apply my scenario as a such ways. I tried too many options
with SS but there is no capability for that

My customer has a SIP-gw they will originate their calls to directly MY
voice GW . My voice-gw will receive this call than will forward to SIP
proxy.

Sip-as5400-sip with uri outboundproxy

Here is the conditions.

Proxy accepting calls with Requested URI mean ( account information user @
domainofproxy) I have 10 sip account on my hand is there any way to set that
account under the voip dial-peers with destination SIP proxy also accepting
calls with anonymous @ calleripaddress means with translating with source

I need a configuration example for that task there are no PSTN or trunk
connection on As5400.

Regards

[ Post a follow-up to this message ]

Hi Cumhur ,



Thank you for your reply ,



IP to IP not supported OS for As5400 ( XM supported  ) also I have tried on
Soft-switchs ( MERA / VMSM / ) applying user information from the anonymous
ingress calls than translations.

Soft-switchs binding their Localhost.localdomain information to at the end
of the packet its shown like this at the from side of contact. I found your
sended documentation on the forum I read than I posted my details.



Invite packet

From : uri sip:callingline@calleripaddress

Contach uri  : user@calleripaddress   -- > it
should be Username@calledDomain or outbound proxy actually its not irregular
format all soft phones  working like this if you need to send user name for
requested uri and also if you are directly sending user name to target proxy
it s automatically binding Proxy ip address as a calledDomain





May be you can suggest any idea after those explanations



Regards



Bilay





From: Cumhur Kizilari [mailto:cumhur@gmail.com]
Sent: Sunday, March 18, 2007 12:45 PM
To: bilay ozer; cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] SIP2SIP2PROXY



Hi,
s
Are you using IP to IP IOS on your router ? if not you should (in my
opinion) use IP to IP IOS for call forwarding over IP.

http://www.cisco.com/en/US/products...s_data_sheet091
86a00801da698.html

http://www.cisco.com/en/US/products...s_configuration
_guide_chapter09186a00806b0a14.html

Regards,
Cumhur



On 3/17/07, bilay ozer <bilayo@a-c-tgmbh.de> wrote:

Hi There,


I am trying to apply my scenario as a such ways. I tried too many options
with SS but there is no capability for that

My customer has a SIP-gw they will originate their calls to directly MY
voice GW . My voice-gw will receive this call than will forward to SIP
proxy.

Sip-as5400-sip with uri outboundproxy

Here is the conditions.

Proxy accepting calls with Requested URI mean ( account information user @
domainofproxy) I have 10 sip account on my hand is there any way to set that
account under the voip dial-peers with destination SIP proxy also accepting
calls with anonymous @ calleripaddress means with translating with source

I need a configuration example for that task there are no PSTN or trunk
connection on As5400.

Regards





 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]