Could just be a brain clog.. but

 

Customer is running CME with 7912's, they have a reception phone, which
when unmanned they would like the call presented to all users in the
office. 

 

Because 7912's are used, there is only 1 line appearance, so a shared
line appearance wont work. Hunt Groups have been suggested but they want
all phones to ring.... 

 

If there any possible scenario where this could be configured to work?

 

Thanks!!

 



 ****************************************
******************************
Any opinions expressed in the email are those of the individual and not nece
ssarily the company. This email and any files transmitted with it are confid
ential and solely for the use of the intended recipient.  If you are not the
 intended recipient or the person responsible for delivering it to the inten
ded recipient, be advised that you have received this email in error and tha
t any dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with the c
ontent of this email please e-mail to: e-security.support@vanco.info

The contents of an attachment to this e-mail may contain software viruses wh
ich could damage your own computer system. While the sender has taken every 
reasonable precaution to minimise this risk, we cannot accept liability for 
any damage which you sustain as a result of software viruses. You shouldcarr
y out your own virus checks before opening any attachments to this e-mail. 

Vanco UK Ltd Registered in England No: 2296733 Registered Office: John Busch
 House, 277 London Road, Isleworth, Middlesex TW7 5AX
 ****************************************
******************************

[ Post a follow-up to this message ]

Johnny,

Use the overlay button in conjunction with multiple
ephone-DNs with the same phone number.

e.g.

ephone-dn 1 dual-line

number 4000

no huntstop

hunstop channel

ephone-dn 2 dual-line

huntstop channel

preference 1

number 4000

ephone 1

button 1o1,2

ephone 2

button 1o1,2


--- Johnny Crothers <Johnny.Crothers@vanco.co.uk>
wrote:

> Could just be a brain clog.. but
>
>
>
> Customer is running CME with 7912's, they have a
> reception phone, which
> when unmanned they would like the call presented to
> all users in the
> office.
>
>
>
> Because 7912's are used, there is only 1 line
> appearance, so a shared
> line appearance wont work. Hunt Groups have been
> suggested but they want
> all phones to ring....
>
>
>
> If there any possible scenario where this could be
> configured to work?
>
>
>
> Thanks!!
>
>
>
>
>
>
 ****************************************
 ******************************
> Any opinions expressed in the email are those of the
> individual and not necessarily the company. This
> email and any files transmitted with it are
> confidential and solely for the use of the intended
> recipient.  If you are not the intended recipient or
> the person responsible for delivering it to the
> intended recipient, be advised that you have
> received this email in error and that any
> dissemination, distribution, copying or use is
> strictly prohibited.
>
> If you have received this email in error, or if you
> are concerned with the content of this email please
> e-mail to: e-security.support@vanco.info
>
> The contents of an attachment to this e-mail may
> contain software viruses which could damage your own
> computer system. While the sender has taken every
> reasonable precaution to minimise this risk, we
> cannot accept liability for any damage which you
> sustain as a result of software viruses. You should
> carry out your own virus checks before opening any
> attachments to this e-mail.
>
> Vanco UK Ltd Registered in England No: 2296733
> Registered Office: John Busch House, 277 London
> Road, Isleworth, Middlesex TW7 5AX
>
 ****************************************
 ******************************
> 
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>




 ________________________________________
____________________________________
________
Sucker-punch spam with award-winning protection.
Try the free Yahoo! Mail Beta.
http://advision.webevents.yahoo.com...tures_spam.html

[ Post a follow-up to this message ]

Check out the night-service feature for this.  First configure
group-pickup normally.  Then you create a night-service code in global
CME config to allow the operator to enable/disable night bell mode.
Configure "night-service bell" on each phone you want to ring while the
system is in night mode.  The user then does a group-pickup to retrieve
the call after hours.
 
http://www.cisco.com/en/US/products...ducts_configura
tion_guide_chapter09186a00806a8300.html#wp1031383
 
-Ryan

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Johnny Crothers
Sent: Monday, March 26, 2007 6:42 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CME Overflow



Could just be a brain clog.. but

 

Customer is running CME with 7912's, they have a reception phone, which
when unmanned they would like the call presented to all users in the
office. 

 

Because 7912's are used, there is only 1 line appearance, so a shared
line appearance wont work. Hunt Groups have been suggested but they want
all phones to ring.... 

 

If there any possible scenario where this could be configured to work?

 

Thanks!!

 



 ****************************************
******************************
Any opinions expressed in the email are those of the individual and not
necessarily the company. This email and any files transmitted with it
are confidential and solely for the use of the intended recipient. If
you are not the intended recipient or the person responsible for
delivering it to the intended recipient, be advised that you have
received this email in error and that any dissemination, distribution,
copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with
the content of this email please e-mail to:
e-security.support@vanco.info

The contents of an attachment to this e-mail may contain software
viruses which could damage your own computer system. While the sender
has taken every reasonable precaution to minimise this risk, we cannot
accept liability for any damage which you sustain as a result of
software viruses. You should carry out your own virus checks before
opening any attachments to this e-mail. 

Vanco UK Ltd Registered in England No: 2296733 Registered Office: John
Busch House, 277 London Road, Isleworth, Middlesex TW7 5AX
 ****************************************
******************************

[ Post a follow-up to this message ]