04-26-07 12:11 AM
I just installed the stand-alone CSA on two IBM servers and three HP
servers without any issues. I did it via VNC remotely, as I always do.
Did you stop the service, uninstall, restart, then re-install? I
always follow these steps and have never ran into any issues.
Matt
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jeff Lamoureaux
Sent: Saturday, April 21, 2007 11:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CSA V5.0.0.210 Remote Install Failure
Do NOT attempt to install the standalone version 5.0.0.210-3.0.3 of
Cisco Security Agent remotely. I attempted this last night and the
servers did not recover without having local support drive into the
office to help out. I was doing an upgrade of an older version of CSA
via VNC and have never had a problem doing remote installs of other
versions in the past. This may be isolated, but make sure that you test
or have a local support plan.
During the installation a warning will come saying that the network will
be disabled momentarily and then return. What actually happens is that
the network will NOT return without pressing ok locally on the machine.
The network does get disabled which limits any chance of continuing the
installation remotely but is not smart enough to bring it back or reboot
without manually pressing an "OK" box. Absolutely ridiculous flaw in
the program and I found it at a site where our local IT guy has a 2 hour
commute to the office. L
Hope this saves someone else...
Jeff
----------------------------------------------------
Jeff Lamoureaux*
Sr. Network Engineer
Business and Technology Services
*Unregistered
Friedman, Billings, Ramsey Group, Inc.
1001 Nineteenth Street North . Arlington, Virginia 22209
T 703.312.9644 . C 571.437.9455 . F 703.312.1718 . jlamoureaux@fbr.com .
www.fbr.com <http://www.fbr.com/>
This electronic message and all attachments transmitted with
it may contain confidential and legally privileged information
belonging to the sender. Please visit
http://www.fbr.com/ecdisclosures.asp for important related
disclosures, by either following the attached hyperlink or
copying and pasting the URL into your internet browser.
CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may
be protected by one or more legal privileges. It is intended
solely for the use of the addressee identified above. If you
are not the intended recipient, any use, disclosure, copying
or distribution of this communication is UNAUTHORIZED. Neither
this information block, the typed name of the sender, nor
anything else in this message is intended to constitute an
electronic signature unless a specific statement to the
contrary is included in this message. If you have received this
communication in error, please immediately contact me and delete
this communication from your computer. Thank you.
[ Post a follow-up to this message ]
| 
