Hopefully someone might be able to assist with finding my ring tone.
Setup is Flexor 151 ATA to which is linked both voip and landline to
same phone and until couple of days ago all worked well.
Now although I can see incoming call via light on voip panel on ATA
there is no ring tone on phone.
Cant be phone problem as it will ring out on landline number.
I have checked this out via mobile call using two differing carriers.
I can make outgoing calls via voip line and receive incoming if I see
the light....
So could this be ATA problem or voip provider problem?

Any guidance most welcome

Cheers

[ Post a follow-up to this message ]

Duncan MacCallum wrote:
> Hopefully someone might be able to assist with finding my ring tone.
> Setup is Flexor 151 ATA to which is linked both voip and landline to
> same phone and until couple of days ago all worked well.
> Now although I can see incoming call via light on voip panel on ATA
> there is no ring tone on phone.
> Cant be phone problem as it will ring out on landline number.

Sounds like ring capacitor problem to me.

Have you changed the adaptor between the phone and the ATA?

Tim

[ Post a follow-up to this message ]

Tim wrote:
> Duncan MacCallum wrote: 
>
> Sounds like ring capacitor problem to me.

On what the phone? it rings via landline but pardon my ignorance...
>
> Have you changed the adaptor between the phone and the ATA?

Nothing has been touched but again I would be thinking power adaptor is
this correct?

Cheers

[ Post a follow-up to this message ]

Duncan MacCallum wrote:
> Tim wrote: 
>
> On what the phone? it rings via landline but pardon my ignorance... 
>
> Nothing has been touched but again I would be thinking power adaptor is
> this correct?
>
> Cheers
>

You might already have done this, however, just in case you
haven't.......have you power cycled the ATA?

[ Post a follow-up to this message ]

Jono wrote:
> Duncan MacCallum wrote: 
>
> You might already have done this, however, just in case you
> haven't.......have you power cycled the ATA?
Tried to reboot from software management and ATA just hung.
Disconnected and fired up again and all seems well even incoming ringtone.
Its an ATA that at times can get confused........
Anyway Jono many thanks and also Tim for taking time to respond.

Cheers

[ Post a follow-up to this message ]

Newsgroups: uk.telecom.voip
Message-ID: <mn.b30e7d7408021319.48968@blueyonder.invalid>
X-Newsreader: MesNews/1.06.00.00-gb
Date: Sun, 22 Apr 2007 13:02:04 +0100
MIME-Version: 1.0
Face:  iVBORw0KGgoAAAANSUhEUgAAADAAAAAwCAIAAADY
YG7QAAABf0lEQVR42u2ZWxLCIAxFy8
qVlWOV
ikDIgxRKOmN/BAaTU3KDEN323Ew9zihQeHw6/hituulpju+DcISwlndj+0DxX6BkMTaqLnScj0NE
 2hprvAgZNgkDqnzA5RQC5e0fEE3TC8ROZoAImhQU
Nha5MqAzDKhyXWgIWxvMdJEdXhRoKVBuFyq/
 K8vg19mkq4Fs7UMhhPeHc4aAdpqItZ4mLowRmvsA
5Xq6mLUBVKl7MVCiWRXENtBCSaErZC5kq5iY
 kAkjOFB5A4AGZmU0dQpoYIiTqTsAyR1MB1JoYq6G
FC8UTy/Nts6UBkh4mpOYhabaQMSLdp0tu7YM
 FIiWxR9IkDhwQjyVKzKO0VDSOEwcDDpdWqrby4As
Y2OB+Zj146oDmrgxqlfoojN1pdNrjmnoTr3q
tO/ sXOnNV2GJ8pS8KHuydksBNetzvaUxrNhIoLeBsFK
mjqC3dqsPGVtPxaYNAJJUMzFZCNe1A6g3
NCxQ4d6PCFnuY8P/ tWhOU2bZwucF63Mbz35sCTYAAAAASUVORK5CYII=

X-Plugin-Infos: B52 version 2 JMST ©
Content-Type: text/plain; charset="iso-8859-15"; format=flowed
Content-Transfer-Encoding: 8bit
Lines: 12
X-Trace: sv3-O2xxS03N8WHqz1pT5i2CtNP8/1w+vHEZalhhx7YhXj8vfyV+WYqsXaFDTAxwQFD
 786eTnpROLMeSLLG!OkYvJG+KpOZ2iQG3wDPt38o
YLd/1PR7K14Ir00uycwpA7FIUkNejNAIHVd6
pyNc6tRKbMa9+
X-Complaints-To: abuse@giganews.com
X-DMCA-Notifications: http://www.giganews.com/info/dmca.html
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint
 properly
X-Postfilter: 1.3.34
Xref: number1.nntp.dca.giganews.com uk.telecom.voip:26213

Duncan MacCallum explained : 
[vbcol=seagreen]
> Tried to reboot from software management and ATA just hung.
> Disconnected and fired up again and all seems well even incoming ringtone.
> Its an ATA that at times can get confused........
> Anyway Jono many thanks and also Tim for taking time to respond.

Glad you're back up & running.

[ Post a follow-up to this message ]