VM issue for CCM qisgtie to IPC MX Dealerboard
Web Server forum
Back To The Forum Home!Search!Private Messaging System

Web Server Talk Web Server Talk > WebserverTalk Community > Voice Over IP > Voice over IP Cisco > VM issue for CCM qisgtie to IPC MX Dealerboard




  Last Thread   Next Thread Next
  Show Printable Version Email this Page Subscribe to this Thread      Post New Thread    Post A Reply      

    VM issue for CCM qisgtie to IPC MX Dealerboard  
Mike Lo


View Ip Address Report This Message To A Moderator Edit/Delete Message


 
04-23-07 12:11 PM

Hi all,

we have the following configuration,
CCM 4.1(3) tie to IPC with T1 PRI qsig.
CCM create RP (eg 1111) and route to IPC.
CCM create Hunt Pilot (eg 3333) and route to Unity for access, 222XXXX is
filled in Calling Party Transform Mask filed.
Unity create mailbox for RP1111, but malbox number is set to 2221111, where
222 is the site code because Unity is for centralization purpose.
IPC create qsig extn 1111 and busy/no answer forward to 3333.
we find the following,
IP phone extn call to 1111 and let it no answer to 3333.
but only listen welcome greeting, and can't leave msg directly.
if IPC call 3333 use qsig extn 1111, it can go to login greeting.

is it IPC issue that they can't deliver 2221111 to Unity when call to 3333?

Mike






[ Post a follow-up to this message ]



    Re: VM issue for CCM qisgtie to IPC MX Dealerboard  
Kalle Tetto


View Ip Address Report This Message To A Moderator Edit/Delete Message


 
04-23-07 06:11 PM

Hi Mike,

I think the RP transformation mask works for calls going to Qsig, but
not if a call comes from the Qsig.

I would propose to add a 222 always for all incoming calls over the qsig
trunk. Or will the calls not routed properly if calls from the qsig have
always the 222 inserted?

Cheers

Mike Lo schrieb:
> Hi all,
>
> we have the following configuration,
> CCM 4.1(3) tie to IPC with T1 PRI qsig.
> CCM create RP (eg 1111) and route to IPC.
> CCM create Hunt Pilot (eg 3333) and route to Unity for access, 222XXXX
> is filled in Calling Party Transform Mask filed.
> Unity create mailbox for RP1111, but malbox number is set to 2221111,
> where 222 is the site code because Unity is for centralization purpose.
> IPC create qsig extn 1111 and busy/no answer forward to 3333.
> we find the following,
> IP phone extn call to 1111 and let it no answer to 3333.
> but only listen welcome greeting, and can't leave msg directly.
> if IPC call 3333 use qsig extn 1111, it can go to login greeting.
>
> is it IPC issue that they can't deliver 2221111 to Unity when call to 3333
?
>
> Mike
>
>
> ------------------------------------------------------------------------
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip





[ Post a follow-up to this message ]



    Sponsored Links  




 





   All times are GMT. The time now is 06:16 PM.      Post New Thread    Post A Reply      
  Last Thread   Next Thread Next


Most Popular forums 

Forum Jump:
Rate This Thread:

Forum Rules:
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is OFF
vB code is ON
Smilies are ON
[IMG] code is OFF
 
Medical and Health forum | Computer Games Reviews | Graphics design forum

Back To The Top
Home | Usercp | Faq | Register