Hello Kave;
I just replied here in order for all the people to benefit from it.
 
first you should have a look on these links for better understanding of the 
problem cause and the available solutions:
http://www.cisco.com/en/US/tech/tk6...
.shtml#topic13
http://www.cisco.com/en/US/products...7b4f.html#42997
 
Most commonly the configuration of the command cp-tone {your country co
de} and the supervisory disconnect commands under the voice port solves it, 
but the problem always is the hardcoded values under the country cp-tone is 
not always match for all sites.
For example for egypt it is defined that the disconnect signal has a frequen
cy of 450 hz and a cadance of 500 this works fine using just the command cp-
tone egypt, but for some areas the frequency is 450 hz but the cadance is 25
0 and that is where the problem arises and the configuration does not work.
 
The solution for that is to create a voice class to define custome values for the disco
nnect tone that is on your area. The question that arise here is that how to know the f
req. and cadance of your area, there are two ways for that the easy one is to go and as
k the teleco guys about the values for the Central Office that you are connected to (an
d this is not always avaliable). The other way is to go to this site http://www.3a
msystems.com/w...tone-search.htm  and download sample files for the dis
connect signal and try to see which is the best match to what you hear when 
the PSTN party hangs (this is the disconnect signal by the way) and when you
 get the closeset signal to yours use the values listed on the site for this
 sample file in a voice class to define a custome disconnect signal. Hopeful
y this will works with you.
 
 
Thanks and Best Regards

Ahmed A. Elnagar
Network Field Engineer
 
Advanced Computer Technology (ACT)
16 Fawzy Ramah St.Off Shehab St.Mohandessin, Giza, Egypt 
Postal Code:12411 Cairo Egypt

Mob: +2010-2833868
Website: www.act-eg.com
E-mail: aelnagar@act-eg.com
 
 

 

________________________________

From: Kave [mailto:kave.manafi@gmail.com] 
Sent: Tuesday, April 24, 2007 3:33 PM
To: aelnagar@act-eg.com
Subject: I Find u for my problem

 

Hi

I find the post msg about FXO disconnect problem 

I have the same problem. would you please reply me if you find the way

 

tnx

Sincerely Yours

Kave Manafi

 

[ Post a follow-up to this message ]