Hi,

I would like to surpress the internal DDI on some phones, therefore I
use the External Phone Number Mask on a line and put the number to send in.

Unfortunatley this does not work with my actual CCM setup 4.2(3). I have
used it so many times before and it has always worked. But not in the
actual setup. I can also see the changed DDI in the upper row of the
Phone correct?
Any ideas, is there a special option in the general Call Manager setting
which I miss?

Cheers

[ Post a follow-up to this message ]

Route pattern set to use the mask?

Scott

-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Kalle Tetto
Sent: Thursday, April 26, 2007 12:47 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] External Phone Number Mask not recognized

Hi,

I would like to surpress the internal DDI on some phones, therefore I
use the External Phone Number Mask on a line and put the number to send
in.

Unfortunatley this does not work with my actual CCM setup 4.2(3). I have

used it so many times before and it has always worked. But not in the
actual setup. I can also see the changed DDI in the upper row of the
Phone correct?
Any ideas, is there a special option in the general Call Manager setting

which I miss?

Cheers

 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]

Thanks alot,

You are right.


Voll, Scott schrieb:
> Route pattern set to use the mask?
>
> Scott
>
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Kalle Tetto
> Sent: Thursday, April 26, 2007 12:47 AM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] External Phone Number Mask not recognized
>
> Hi,
>
> I would like to surpress the internal DDI on some phones, therefore I
> use the External Phone Number Mask on a line and put the number to send
> in.
>
> Unfortunatley this does not work with my actual CCM setup 4.2(3). I have
>
> used it so many times before and it has always worked. But not in the
> actual setup. I can also see the changed DDI in the upper row of the
> Phone correct?
> Any ideas, is there a special option in the general Call Manager setting
>
> which I miss?
>
> Cheers
>
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]