Anyone ever configured a CME system to no use a access code to make PSTN
calls? If so can you provide an overview of what you did?

I believe it can be done, but have never tested. My guess is you just need
to setup the correct dial-peers.

TIA.

--
Have a great day!!!!!!!!!!
zephy316_gmail.com

Replace the _ with an @ symbol

[ Post a follow-up to this message ]

Yes, I set this up at home in the past.  (My wife gave me trouble about
having to dial "9" to get out of the house)

 

It is really no different than using access codes.  The only catch is
with your extension numbers overlapping with outdialing ranges., which
just requires additional dial peers.

 

 

 

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Israel Lang
Sent: Thursday, April 26, 2007 9:38 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CME Question

 

Anyone ever configured a CME system to no use a access code to make PSTN
calls? If so can you provide an overview of what you did?

I believe it can be done, but have never tested. My guess is you just
need to setup the correct dial-peers. 

TIA.

-- 
Havea great day!!!!!!!!!!
zephy316_gmail.com

Replace the _ with an @ symbol 



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.

[ Post a follow-up to this message ]