I was using MGCP and converted to h323.  I'm now seeing problems with an
out bound Modem calling out.

 

How can I setup a dail peer for the number that the modem is calling?

 

Thanks

 

Scott

 

 

[ Post a follow-up to this message ]

Voice Service voip

Modem passthorugh nse codec u711ulaw

 

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, April 27, 2007 8:36 AM
To: cisco-voip@puck-nether.net
Subject: [cisco-voip] dial peer for Modem call

 

I was using MGCP and converted to h323.  I'm now seeing problems with an
out bound Modem calling out.

 

How can I setup a dail peer for the number that the modem is calling?

 

Thanks

 

Scott

 

 

[ Post a follow-up to this message ]

You're asking for a dial-peer so I'm wondering - can it complete the call at
 all?

If you can complete the call, but just want to match the call on the outboun
d, on your PSTN gateway use 'answer-address' on a voip peer to match the cal
led party.

Finally, there's been some rumblings that relay is generally more successful
 than passthrough...
http://www.commsdesign.com/showArti...icleID=16500688

-Mark

--

Mark Turpin
Senior Consultant - Unified Communications
Calence, LLC
IP Phone: 314.656.2315
Mobile: 314.629.8714
www.calence.com
2005 cisco Global Channel Partner of the Year - US/Canada

_________________________


The information contained in this message and any attachment may contain pri
vileged or confidential information protected from disclosure. If you are no
t the intended recipient, or an employee or agent responsible for delivering
 this message to the intend
ed recipient, you are hereby notified that any review, dissemination, distri
bution or copying of this information is strictly prohibited.  If you have r
eceived this transmission in error, please notify the sender immediately by 
replying to this message an
d destroying the original and all copies.  Thank you.


________________________________

From: cisco-voip-bounces@puck.nether.net on behalf of Voll, Scott
Sent: Fri 4/27/2007 3:21 PM
To: cisco-voip@puck-nether.net
Subject: Re: [cisco-voip] dial peer for Modem call



Voice Service voip

Modem passthorugh nse codec u711ulaw



________________________________

From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Voll, Scott
Sent: Friday, April 27, 2007 8:36 AM
To: cisco-voip@puck-nether.net
Subject: [cisco-voip] dial peer for Modem call



I was using MGCP and converted to h323.  I'm now seeing problems with an out
 bound Modem calling out.



How can I setup a dail peer for the number that the modem is calling?



Thanks



Scott

[ Post a follow-up to this message ]

Correction, incoming called-number, not answer address.

-Mark

--

Mark Turpin
Senior Consultant - Unified Communications
Calence, LLC
IP Phone: 314.656.2315
Mobile: 314.629.8714
www.calence.com
2005 cisco Global Channel Partner of the Year - US/Canada

_________________________


The information contained in this message and any attachment may contain pri
vileged or confidential information protected from disclosure. If you are no
t the intended recipient, or an employee or agent responsible for delivering
 this message to the intend
ed recipient, you are hereby notified that any review, dissemination, distri
bution or copying of this information is strictly prohibited.  If you have r
eceived this transmission in error, please notify the sender immediately by 
replying to this message an
d destroying the original and all copies.  Thank you.


________________________________

From: cisco-voip-bounces@puck.nether.net on behalf of Turpin, Mark
Sent: Sun 4/29/2007 9:08 AM
To: Voll, Scott; cisco-voip@puck-nether.net
Subject: Re: [cisco-voip] dial peer for Modem call



You're asking for a dial-peer so I'm wondering - can it complete the call at
 all?

If you can complete the call, but just want to match the call on the outboun
d, on your PSTN gateway use 'answer-address' on a voip peer to match the cal
led party.

Finally, there's been some rumblings that relay is generally more successful
 than passthrough...
http://www.commsdesign.com/showArti...icleID=16500688

-Mark

--

Mark Turpin
Senior Consultant - Unified Communications
Calence, LLC
IP Phone: 314.656.2315
Mobile: 314.629.8714
www.calence.com
2005 cisco Global Channel Partner of the Year - US/Canada

_________________________


The information contained in this message and any attachment may contain pri
vileged or confidential information protected from disclosure. If you are no
t the intended recipient, or an employee or agent responsible for delivering
 this message to the intend
ed recipient, you are hereby notified that any review, dissemination, distri
bution or copying of this information is strictly prohibited.  If you have r
eceived this transmission in error, please notify the sender immediately by 
replying to this message an
d destroying the original and all copies.  Thank you.


________________________________

From: cisco-voip-bounces@puck.nether.net on behalf of Voll, Scott
Sent: Fri 4/27/2007 3:21 PM
To: cisco-voip@puck-nether.net
Subject: Re: [cisco-voip] dial peer for Modem call



Voice Service voip

Modem passthorugh nse codec u711ulaw



________________________________

From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Voll, Scott
Sent: Friday, April 27, 2007 8:36 AM
To: cisco-voip@puck-nether.net
Subject: [cisco-voip] dial peer for Modem call



I was using MGCP and converted to h323.  I'm now seeing problems with an out
 bound Modem calling out.



How can I setup a dail peer for the number that the modem is calling?



Thanks



Scott






 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]