I've searched through the archives and it almost seems that the Bogen
TAM-B can be connected via FXO or FXS (with some limitations depending
on the system)?

 

I've read that it can be tricky to kill the stream in an FXS or FXO and
it just keeps looping... Ultimately we would want to dial a DN and have
the system forward DTMF zone code. I'm assuming that this would be
dial-peer rules in this configuration? This seems to me to be an FXS
configuration.

 

Anyone have a TAM-B working in either of these configurations?  If so,
what are the limitations?

 

TIA!

 

Johan Bloemhard 
___________________________________ 
Silver Falls School District 4J 
802 Schlador Street 
Silverton, OR 97381 
w: 503.873.6331 

 

[ Post a follow-up to this message ]

We use a TAM-B to interface from a VG248 into an overhead paging system. Wor
ks without a hitch. There are settings on the TAM-B that will help in many s
ituations.

----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

----- Original Message ----- 
From: Johan Bloemhard 
To: cisco-voip@puck.nether.net 
Sent: Friday, April 27, 2007 1:08 PM
Subject: [cisco-voip] Bogen TAM-B -> FXO/FXS?


I've searched through the archives and it almost seems that the Bogen TAM-B 
can be connected via FXO or FXS (with some limitations depending on the syst
em)?

 

I've read that it can be tricky to kill the stream in an FXS or FXO and it j
ust keeps looping. Ultimately we would want to dial a DN and have the system
 forward DTMF zone code. I'm assuming that this would be dial-peer rules in 
this configuration? This seems to me to be an FXS configuration.

 

Anyone have a TAM-B working in either of these configurations?  If so, what 
are the limitations?

 

TIA!

 

Johan Bloemhard 
___________________________________ 
Silver Falls School District 4J 
802 Schlador Street 
Silverton, OR 97381 
w: 503.873.6331 

 



----------------------------------------------------------------------------
--


 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]

Johan,

I've setup a TAM-B module with CCM off of an FXO card
as well as using a ATA device. It's not that tricky
and you shouldn't have many problems setting it up. If
it doesn't work the first time around you probably
have tip and ring reversed.

Paul


--- Johan Bloemhard
<bloemhard_johan@silverfalls.k12.or.us> wrote:

> I've searched through the archives and it almost
> seems that the Bogen
> TAM-B can be connected via FXO or FXS (with some
> limitations depending
> on the system)?
>
>
>
> I've read that it can be tricky to kill the stream
> in an FXS or FXO and
> it just keeps looping... Ultimately we would want to
> dial a DN and have
> the system forward DTMF zone code. I'm assuming that
> this would be
> dial-peer rules in this configuration? This seems to
> me to be an FXS
> configuration.
>
>
>
> Anyone have a TAM-B working in either of these
> configurations?  If so,
> what are the limitations?
>
>
>
> TIA!
>
>
>
> Johan Bloemhard
> ___________________________________
> Silver Falls School District 4J
> 802 Schlador Street
> Silverton, OR 97381
> w: 503.873.6331
>
>
> 
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>


 ________________________________________
__________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

[ Post a follow-up to this message ]

I've successfully done a handful of TAM-B's off VG428s (FXS) with single zon
e.  I haven't tried multiple zones, but as you suggested, dtmf-relay is what
 you're looking for to pass the zone number.  Generally speaking, the produc
t works as expected...


-Mark


--

Mark Turpin
Senior Consultant - Unified Communications
Calence, LLC
IP Phone: 314.656.2315
Mobile: 314.629.8714
www.calence.com
2005 cisco Global Channel Partner of the Year - US/Canada

_________________________


The information contained in this message and any attachment may contain pri
vileged or confidential information protected from disclosure. If you are no
t the intended recipient, or an employee or agent responsible for delivering
 this message to the intend
ed recipient, you are hereby notified that any review, dissemination, distri
bution or copying of this information is strictly prohibited.  If you have r
eceived this transmission in error, please notify the sender immediately by 
replying to this message an
d destroying the original and all copies.  Thank you.

--- Johan Bloemhard
<bloemhard_johan@silverfalls.k12.or.us> wrote:

> I've searched through the archives and it almost
> seems that the Bogen
> TAM-B can be connected via FXO or FXS (with some
> limitations depending
> on the system)?
>
>
>
> I've read that it can be tricky to kill the stream
> in an FXS or FXO and
> it just keeps looping... Ultimately we would want to
> dial a DN and have
> the system forward DTMF zone code. I'm assuming that
> this would be
> dial-peer rules in this configuration? This seems to
> me to be an FXS
> configuration.
>
>
>
> Anyone have a TAM-B working in either of these
> configurations?  If so,
> what are the limitations?
>
>
>
> TIA!
>
>
>
> Johan Bloemhard
> ___________________________________
> Silver Falls School District 4J
> 802 Schlador Street
> Silverton, OR 97381
> w: 503.873.6331
>

[ Post a follow-up to this message ]