my 3845 was just dropped off. 

what IOS are people recommending for this thing? primarily used as a voice g
ateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will be doing mu
ch transcoding, (other than from PSTN to voip) or conferencing.


----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

[ Post a follow-up to this message ]

Personally I like to start with the newest mainline code.  But I don't
know if the 3845 has a mainline code yet.

 

I guess the newest T train.

 

Scott

 

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 6:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845

 

my 3845 was just dropped off. 

 

what IOS are people recommending for this thing? primarily used as a
voice gateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will
be doing much transcoding, (other than from PSTN to voip) or
conferencing.

 

 

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

[ Post a follow-up to this message ]

Well, considering we've got 7911s we need SRST for, looks like it's 12.4(9)T
 or better for me!

Talk about bleeding edge...at least it looks like 12.4(11)T2 is LD and not E
D.

Thanks for all your suggestions.



----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

----- Original Message ----- 
From: Carter, Bill 
To: Lelio Fulgenzi 
Sent: Tuesday, May 08, 2007 12:45 PM
Subject: RE: [cisco-voip] which ios to use for 3845


12.4(6)T7 or 12.4(7)b

http://www.cisco.com/univercd/cc/td...p.htm#wp1261437

Cisco "Golden Bridge" documents
http://www.cisco.com/univercd/cc/td...x/4_4/index.htm





----------------------------------------------------------------------------
--
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 8:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845


my 3845 was just dropped off. 

what IOS are people recommending for this thing? primarily used as a voice g
ateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will be doing mu
ch transcoding, (other than from PSTN to voip) or conferencing.


----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
..there's no such thing as a bad timbit...

[ Post a follow-up to this message ]

You really gotta like it when documentation conflicts.

And from srst 3.3 "supported firmware, platforms, etc", we get a table that 
says 7911g is supported.

http://www.cisco.com/en/US/customer...00805fdf87.html
[vbcol=seagreen]
>From srst 4.1 datasheet we get a table that says 7911g is not supported until 4.0[/
vbcol]

http://www.cisco.com/en/US/customer...cd805e1e79.html

"round and round she goes, where she stops, nobody knows."


Cisco Unified IP Phone Support
 
Cisco Unified IP Phone or cisco Endpoint
File Name of Compatible cisco Unified CallManager
Firmware for SCCP 
File Name of Compatible
Cisco Unified CallManager 
Firmware for SIP 
 
Cisco ATA-186 

Cisco ATA-188
ATA030100SCCP040211A.zup
-
 
Cisco IP Communicator 2.0*
NA
NA
 
Cisco Unified IP Phone 7902G
CP7902040000SCCP040701A.sbin
-
 
Cisco Unified IP Phone 7905G
CP7902040000SCCP040701A.sbin
-
 
Cisco Unified IP Phone 7910
P00403020214.bin
-
 
Cisco IP Phone 7911G*
cmterm-7911-sccp.7-2-1.exe
-
 


Table 3. cisco Unified IP Phone Support Using SCCP

Phone
Cisco Unified SRST 2.1
Cisco Unified SRST 3.3
Cisco Unified SRST 3.4
Cisco Unified SRST 4.0
Cisco Unified SRST 4.1
 
Cisco Unified IP Phone 7970G and 7971G-GE models
-
X
X
X
X
 
Cisco Unified IP Phone 7960G and 7940G models
X
X
X
X
X
 
Cisco Unified IP Phone 7961G, 7941G, 7961G-GE, and 7941G-GE models
-
X
X
X
X
 
Cisco Unified IP Conference Station 7935
X
X
X
X
X
 
Cisco Unified IP Conference Station 7936
-
X
X
X
X
 
Cisco Unified IP Phone 7912G
-
X
X
X
X
 
Cisco Unified IP Phone 7911G
-
-
-
X
X
 


----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

----- Original Message ----- 
From: Lelio Fulgenzi 
To: cisco-voip@puck.nether.net 
Sent: Thursday, May 10, 2007 4:54 PM
Subject: Re: [cisco-voip] which ios to use for 3845


Well, considering we've got 7911s we need SRST for, looks like it's 12.4(9)T
 or better for me!

Talk about bleeding edge...at least it looks like 12.4(11)T2 is LD and not E
D.

Thanks for all your suggestions.



----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
..there's no such thing as a bad timbit...

----- Original Message ----- 
From: Carter, Bill 
To: Lelio Fulgenzi 
Sent: Tuesday, May 08, 2007 12:45 PM
Subject: RE: [cisco-voip] which ios to use for 3845


12.4(6)T7 or 12.4(7)b

http://www.cisco.com/univercd/cc/td...p.htm#wp1261437

Cisco "Golden Bridge" documents
http://www.cisco.com/univercd/cc/td...x/4_4/index.htm





----------------------------------------------------------------------------
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 8:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845


my 3845 was just dropped off. 

what IOS are people recommending for this thing? primarily used as a voice g
ateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will be doing mu
ch transcoding, (other than from PSTN to voip) or conferencing.


----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
..there's no such thing as a bad timbit...

[ Post a follow-up to this message ]

I have SRST version 3.3 gateways with 7911g's.  They worked in our
testing.

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, May 11, 2007 8:53 AM
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] which ios to use for 3845


You really gotta like it when documentation conflicts.
 
And from srst 3.3 "supported firmware, platforms, etc", we get a table
that says 7911g is supported.
 
http://www.cisco.com/en/US/customer...s2169/prod_inst
allation_guide09186a00805fdf87.html
 
>From srst 4.1 datasheet we get a table that says 7911g is not supported
until 4.0
 
http://www.cisco.com/en/US/customer...s2169/products_
data_sheet0900aecd805e1e79.html
 
"round and round she goes, where she stops, nobody knows."
 
 
Cisco Unified IP Phone Support

Cisco Unified IP Phone or cisco Endpoint

File Name of Compatible cisco Unified CallManager
Firmware for SCCP 

File Name of Compatible
Cisco Unified CallManager 
Firmware for SIP 

Cisco ATA-186 

Cisco ATA-188

ATA030100SCCP040211A.zup

-

Cisco IP Communicator 2.0*

NA

NA

Cisco Unified IP Phone 7902G

CP7902040000SCCP040701A.sbin

-

Cisco Unified IP Phone 7905G

CP7902040000SCCP040701A.sbin

-

Cisco Unified IP Phone 7910

P00403020214.bin

-

Cisco IP Phone 7911G*

cmterm-7911-sccp.7-2-1.exe

-

 

Table 3. cisco Unified IP Phone Support Using SCCP

	
Phone

Cisco Unified SRST 2.1

Cisco Unified SRST 3.3

Cisco Unified SRST 3.4

Cisco Unified SRST 4.0

Cisco Unified SRST 4.1

Cisco Unified IP Phone 7970G and 7971G-GE models

-

X

X

X

X

Cisco Unified IP Phone 7960G and 7940G models

X

X

X

X

X

Cisco Unified IP Phone 7961G, 7941G, 7961G-GE, and 7941G-GE models

-

X

X

X

X

Cisco Unified IP Conference Station 7935

X

X

X

X

X

Cisco Unified IP Conference Station 7936

-

X

X

X

X

Cisco Unified IP Phone 7912G

-

X

X

X

X

Cisco Unified IP Phone 7911G

-

-

-

X

X

 
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...


----- Original Message ----- 
From: Lelio Fulgenzi <mailto:lelio@uoguelph.ca>  
To: cisco-voip@puck.nether.net 
Sent: Thursday, May 10, 2007 4:54 PM
Subject: Re: [cisco-voip] which ios to use for 3845

Well, considering we've got 7911s we need SRST for, looks like
it's 12.4(9)T or better for me!
 
Talk about bleeding edge...at least it looks like 12.4(11)T2 is
LD and not ED.
 
Thanks for all your suggestions.
 
 
 
	
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario
N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
	
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
..there's no such thing as a bad timbit...
	

----- Original Message ----- 
From: Carter, Bill <mailto:bcarter@sentinel.com>  
To: Lelio Fulgenzi <mailto:lelio@uoguelph.ca>  
Sent: Tuesday, May 08, 2007 12:45 PM
Subject: RE: [cisco-voip] which ios to use for 3845

12.4(6)T7 or 12.4(7)b
 
	
http://www.cisco.com/univercd/cc/td...tele/gblink/sys
tem/gbtst4x/4_4/rng44nip.htm#wp1261437
 
Cisco "Golden Bridge" documents
	
http://www.cisco.com/univercd/cc/td...tele/gblink/sys
tem/gbtst4x/4_4/index.htm
	
<http://www.cisco.com/univercd/cc/td..._tele/gblink/sy
stem/gbtst4x/4_4/rng44nip.htm>  
 

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 8:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845
	
	
my 3845 was just dropped off. 
 
what IOS are people recommending for this thing?
primarily used as a voice gateway (2 T1/PRIs using MGCP) and for SRST. I
don't think I will be doing much transcoding, (other than from PSTN to
voip) or conferencing.
 
 
	
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph,
Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
	
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
..there's no such thing as a bad timbit...
	

[ Post a follow-up to this message ]

too bad the call-manager-fall back doesn't support 7911 for max-lines. or th
e 7936 for that matter.

----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...there's no such thing as a bad timbit...

----- Original Message ----- 
From: Carter, Bill 
To: Lelio Fulgenzi ; cisco-voip@puck.nether.net 
Sent: Friday, May 11, 2007 1:52 PM
Subject: RE: [cisco-voip] which ios to use for 3845


I have SRST version 3.3 gateways with 7911g's.  They worked in our testing.



----------------------------------------------------------------------------
--
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, May 11, 2007 8:53 AM
To: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] which ios to use for 3845


You really gotta like it when documentation conflicts.

And from srst 3.3 "supported firmware, platforms, etc", we get a table that 
says 7911g is supported.

http://www.cisco.com/en/US/customer...00805fdf87.html

From srst 4.1 datasheet we get a table that says 7911g is not supported unti
l 4.0

http://www.cisco.com/en/US/customer...cd805e1e79.html

"round and round she goes, where she stops, nobody knows."


Cisco Unified IP Phone Support
 
Cisco Unified IP Phone or cisco Endpoint
File Name of Compatible cisco Unified CallManager
Firmware for SCCP 
File Name of Compatible
Cisco Unified CallManager 
Firmware for SIP 
 
Cisco ATA-186 

Cisco ATA-188
ATA030100SCCP040211A.zup
-
 
Cisco IP Communicator 2.0*
NA
NA
 
Cisco Unified IP Phone 7902G
CP7902040000SCCP040701A.sbin
-
 
Cisco Unified IP Phone 7905G
CP7902040000SCCP040701A.sbin
-
 
Cisco Unified IP Phone 7910
P00403020214.bin
-
 
Cisco IP Phone 7911G*
cmterm-7911-sccp.7-2-1.exe
-
 


Table 3. cisco Unified IP Phone Support Using SCCP

Phone
Cisco Unified SRST 2.1
Cisco Unified SRST 3.3
Cisco Unified SRST 3.4
Cisco Unified SRST 4.0
Cisco Unified SRST 4.1
 
Cisco Unified IP Phone 7970G and 7971G-GE models
-
X
X
X
X
 
Cisco Unified IP Phone 7960G and 7940G models
X
X
X
X
X
 
Cisco Unified IP Phone 7961G, 7941G, 7961G-GE, and 7941G-GE models
-
X
X
X
X
 
Cisco Unified IP Conference Station 7935
X
X
X
X
X
 
Cisco Unified IP Conference Station 7936
-
X
X
X
X
 
Cisco Unified IP Phone 7912G
-
X
X
X
X
 
Cisco Unified IP Phone 7911G
-
-
-
X
X
 


----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
..there's no such thing as a bad timbit...

----- Original Message ----- 
From: Lelio Fulgenzi 
To: cisco-voip@puck.nether.net 
Sent: Thursday, May 10, 2007 4:54 PM
Subject: Re: [cisco-voip] which ios to use for 3845


Well, considering we've got 7911s we need SRST for, looks like it's 12.4(9)T
 or better for me!

Talk about bleeding edge...at least it looks like 12.4(11)T2 is LD and not E
D.

Thanks for all your suggestions.



----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
..there's no such thing as a bad timbit...

----- Original Message ----- 
From: Carter, Bill 
To: Lelio Fulgenzi 
Sent: Tuesday, May 08, 2007 12:45 PM
Subject: RE: [cisco-voip] which ios to use for 3845


12.4(6)T7 or 12.4(7)b

http://www.cisco.com/univercd/cc/td...p.htm#wp1261437

Cisco "Golden Bridge" documents
http://www.cisco.com/univercd/cc/td...x/4_4/index.htm





--------------------------------------------------------------------------
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 8:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845


my 3845 was just dropped off. 

what IOS are people recommending for this thing? primarily used as a voice g
ateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will be doing mu
ch transcoding, (other than from PSTN to voip) or conferencing.


----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
..there's no such thing as a bad timbit...

[ Post a follow-up to this message ]

I am running 12.4.12a  on a 3845 that currently support about 100 7911
telephones. Tested SRST Thursday night - it took about 6 minutes for the
phones to register, no problems.
[vbcol=seagreen] 
Well, considering we've got 7911s we need SRST for, looks like it's
12.4(9)T or better for me!

Talk about bleeding edge...at least it looks like 12.4(11)T2 is LD and
not ED.

Thanks for all your suggestions.



----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

...there's no such thing as a bad timbit...

----- Original Message -----
From: Carter, Bill
To: Lelio Fulgenzi
Sent: Tuesday, May 08, 2007 12:45 PM
Subject: RE: [cisco-voip] which ios to use for 3845


12.4(6)T7 or 12.4(7)b


http://www.cisco.com/univercd/cc/td...p.htm#wp1261437


Cisco "Golden Bridge" documents

http://www.cisco.com/univercd/cc/td...x/4_4/index.htm






----------------------------------------------------------------------------
--
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Lelio
Fulgenzi
Sent: Tuesday, May 08, 2007 8:57 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] which ios to use for 3845


my 3845 was just dropped off.

what IOS are people recommending for this thing? primarily used as a
voice gateway (2 T1/PRIs using MGCP) and for SRST. I don't think I will
be doing much transcoding, (other than from PSTN to voip) or
conferencing.



----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G
2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)

 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
..there's no such thing as a bad timbit...

************************************
This email may contain privileged and/or confidential information that is in
tended solely for the use of the addressee.  If you are not the intended rec
ipient or entity, you are strictly prohibited from disclosing, copying, dist
ributing or using any of th
e information contained in the transmission.  If you received this communica
tion in error, please contact the sender immediately and destroy the materia
l in its entirety, whether electronic or hard copy.  This communication may 
contain nonpublic personal
information about consumers subject to the restrictions of the Gramm-Leach-B
liley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly re
use or disclose such information for any purpose other than to provide the s
ervices for which you are r
eceiving the information.
There are risks associated with the use of electronic transmission.  The sen
der of this information does not control the method of transmittal or servic
e providers and assumes no duty or obligation for the security, receipt, or 
third party interception of
this transmission.
************************************

[ Post a follow-up to this message ]