I have two orchestrations communicating;
In the first orchestration -
I am receiving a file via a WebService, i immediatly send the file to a MSMQ
T and a File folder.  The file gets to the File Folder and if my receive por
t for the MSMQT is not enabled i get an error message that there is no subsc
ription (so i know the file
is being sent to the MSMQT (i set a filter on the MSMQT send port with a Rec
eive port name).
In the second orchestration -
It receives the info from the MSMQT and just to test i immediatly send the f
ile to a file folder.  I am getting no errors but i am not seeing the messag
e on the second orchestration go to the file folder.
I am not that experienced with HAT and i am not seeing any info that the sec
ond orchestration even started.
In BizTalk explored i binded the receive port to the orchestration........
this is driving me crazy b/c it seems that the second orchestration is never
 called but i get no errors
I would REALLY appreciate any help
thanks in advance
KIM

[ Post a follow-up to this message ]

Probably best to work backwards...

TIP:
So for this type of scenario, i often use a listen shape, one side of which
i use a receive shape which i wire up to my required transport (in your case
MSMQT) and the other side i use to a recieve shape wired to file transport,
that way i can test quickly without having to undeploy/redply every time.

So, create an instance of the the 1st orchestration output document which
would ordinarily goto MSMQT and drop that in the filedrop location used by
the 2nd orchestration, so you can prove that works.

You could also achieve the same test by using a Content Based Routing (CBR)
by using a filter

Hope this makes sense

rgds


--
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/info/cpyright.htm


"Kimberly" <anonymous@discussions.microsoft.com> wrote in message
news:AEFEAF07-858A-46E7-A4C9-673E4BD46FF1@microsoft.com...
I have two orchestrations communicating;
In the first orchestration -
I am receiving a file via a WebService, i immediatly send the file to a
MSMQT and a File folder.  The file gets to the File Folder and if my receive
port for the MSMQT is not enabled i get an error message that there is no
subscription (so i know the file is being sent to the MSMQT (i set a filter
on the MSMQT send port with a Receive port name).
In the second orchestration -
It receives the info from the MSMQT and just to test i immediatly send the
file to a file folder.  I am getting no errors but i am not seeing the
message on the second orchestration go to the file folder.
I am not that experienced with HAT and i am not seeing any info that the
second orchestration even started.
In BizTalk explored i binded the receive port to the orchestration........
this is driving me crazy b/c it seems that the second orchestration is never
called but i get no errors
I would REALLY appreciate any help
thanks in advance
KIM

[ Post a follow-up to this message ]

Make sure that the second orchestration is enlisted and started and make
sure that the address that you are using on the MSMQT send port contains
the correct computer name.
You won't get any error if you enter a bad computer name in the MSMQT send
port. MSMQT will believe that the computer is down and it will wait and try
to send the message later.

[ Post a follow-up to this message ]