Hi,

I just have setup an Asterisk server at home.
I have 2 phones (at the moment) connected
* 1 -> at home => works fine
* The second one, at my friend house.

The last one, doesn't register...

SIP.CONF
[121]

type=friend
username=121
secret=121
host=dynamic
callerid=121
context=default
mailbox=121
canreinvite=no
nat=yes

On my router I declared  : the SIP available port [5050 - 5090] (just to
make sure I can catch everything :-)

And I can't regsiter....

ANy idea ?

THanks for your help

[ Post a follow-up to this message ]

Steve pretended :
> Hi,
>
> I just have setup an Asterisk server at home.
> I have 2 phones (at the moment) connected
> * 1 -> at home => works fine
> * The second one, at my friend house.
>
> The last one, doesn't register...
>
> SIP.CONF
> [121]
>
> type=friend
> username=121
> secret=121
> host=dynamic
> callerid=121
> context=default
> mailbox=121
> canreinvite=no
> nat=yes
>
> On my router I declared  : the SIP available port [5050 - 5090] (just 
to make
> sure I can catch everything :-)
>
> And I can't regsiter....
>
> ANy idea ?
>
> THanks for your help

Have you got:

localnet=192.168.2.1/255.255.255.0
externip=your.ip.or.hostname
nat=yes

...in your sip.conf?

Remote extensions are painful with NAT, let alone NAT at both sites.

You also need to port forward 10000-20000 for RTP....

Some of the ports below may also be required:

8000 - 8012
3478 - 3483
5004 - 5036
4560 - 4570
2727

[ Post a follow-up to this message ]

"Jono" <nothanks@blueyonder.invalid> wrote in message
news:mn.6c9b7d758eaa5480.48968@blueyonder.invalid...
> Steve pretended : 
(just to make[vbcol=seagreen] 
>
> Have you got:
>
> localnet=192.168.2.1/255.255.255.0
> externip=your.ip.or.hostname
> nat=yes
>
> ...in your sip.conf?
>
> Remote extensions are painful with NAT, let alone NAT at both sites.
>
> You also need to port forward 10000-20000 for RTP....
>
> Some of the ports below may also be required:
>
> 8000 - 8012
> 3478 - 3483
> 5004 - 5036
> 4560 - 4570
> 2727
>
>
>
Jono

I'm going through a similar problem with the X-lite softphone and with
a Sipura ATA2000 on Sipgate and voip.co.uk. I have a preconfigured
X-Lite softphone supplied by Sipgate and it works perfectly with
incoming calls without the need to port forward through my router. The
non-preconfigured softphone looks to register with either Sipgate or
voip but I cannot make calls: the Sipura will not register with
either.

My Belkin router will only permit one UDP range to be forwarded per IP
address. How do I manage the others? I have even tried the DMZ with no
joy.

Any advice gratefully received - it's driving me batty!


--
Woody

harrogate3 at ntlworld dot com

[ Post a follow-up to this message ]

harrogate3 laid this down on his screen :
> "Jono" <nothanks@blueyonder.invalid> wrote in message
> news:mn.6c9b7d758eaa5480.48968@blueyonder.invalid... 
> Jono
>
> I'm going through a similar problem with the X-lite softphone and with
> a Sipura ATA2000 on Sipgate and voip.co.uk. I have a preconfigured
> X-Lite softphone supplied by Sipgate and it works perfectly with
> incoming calls without the need to port forward through my router. The
> non-preconfigured softphone looks to register with either Sipgate or
> voip but I cannot make calls: the Sipura will not register with
> either.
>
> My Belkin router will only permit one UDP range to be forwarded per IP
> address. How do I manage the others? I have even tried the DMZ with no
> joy.
>
> Any advice gratefully received - it's driving me batty!

Is it the SPA you're having probs with, in particular?

Have you given it a static IP address on your LAN? If so, make sure you
also enter the DNS server IP addresses too, otherwise it won't be able
to look up the server's address - the SPA doesn't think "Oh, I'll use
the router as a DNS server" you actually need to enter the addresses
manually.

[ Post a follow-up to this message ]

Steve wrote:
> Hi,
>
> I just have setup an Asterisk server at home.
> I have 2 phones (at the moment) connected
> * 1 -> at home => works fine
> * The second one, at my friend house.
>
> The last one, doesn't register...
>
> SIP.CONF
> [121]
>
> type=friend
> username=121
> secret=121
> host=dynamic
> callerid=121
> context=default
> mailbox=121
> canreinvite=no
> nat=yes
>
> On my router I declared  : the SIP available port [5050 - 5090] (just 
to
> make sure I can catch everything :-)
>
> And I can't regsiter....
>
> ANy idea ?
>
> THanks for your help
>
>
>


I made the test, but without any success.. :-(
I try as well to leave my machine on DMZ zone, adn works fine.. I
suppose that my router is the problem (Router Billion 7300G)

That's really annoying....

FOR info, (and I don't lknow why) X-lite v3.0, try to regsiter on port
absolutely crasy ; something like 43000... anyway...

[ Post a follow-up to this message ]

"Steve" <user@mail.com> wrote in message
news:f28rbv$3o1$1$8300dec7@news.demon.co.uk...
> Steve wrote: 
(just to[vbcol=seagreen] 
>
>
> I made the test, but without any success.. :-(
> I try as well to leave my machine on DMZ zone, adn works fine.. I
> suppose that my router is the problem (Router Billion 7300G)
>
> That's really annoying....
>
> FOR info, (and I don't lknow why) X-lite v3.0, try to regsiter on
port
> absolutely crasy ; something like 43000... anyway...
>

Snap - mine does as well.....................


--
Woody

harrogate3 at ntlworld dot com

[ Post a follow-up to this message ]

"Jono" <nothanks@blueyonder.invalid> wrote in message
news:mn.6d757d753705997f.48968@blueyonder.invalid...
> harrogate3 laid this down on his screen : 
(just to[vbcol=seagreen] 
sites.[vbcol=seagreen] 
with[vbcol=seagreen] 
The[vbcol=seagreen] 
or[vbcol=seagreen] 
per IP[vbcol=seagreen] 
with no[vbcol=seagreen] 
>
> Is it the SPA you're having probs with, in particular?
>
> Have you given it a static IP address on your LAN? If so, make sure
you
> also enter the DNS server IP addresses too, otherwise it won't be
able
> to look up the server's address - the SPA doesn't think "Oh, I'll
use
> the router as a DNS server" you actually need to enter the addresses
> manually.
>
>

Curiously although I only have nnn.nnn.nnn.1-3 allocated, if I leave
DHCP active it always registers as 18. Have tried static addressing
but to no joy.

What I don't understand is why one softphone works OK incoming but not
outgoing in the same or a later version. The fact that I seem to have
no joy with either softphone or ATA suggests to me it is a routing
problem but I'll be blowed if I can find out what/where it is! Maybe
time to ditch the Belkin and get a Netgear or Cisco?


--
Woody

harrogate3 at ntlworld dot com

[ Post a follow-up to this message ]