Hi

Just brought a LINKSYS PAP2-NA UNLOCKED from ebay - collected it
today.  I'm having problems getting it to work.

Done a google but still no joy.

Dial **** to access the IVR Menu, then enter 110#

It then reads out : 192.168.15.113

100# 	Check DHCP (ENABLED)
101# 	Set DHCP (1=enable, 0=disable)
110# 	Check IP address  -  (192.168.15.113)
111# 	Set IP address (* = .)
120# 	Check Netmask -   (255.255.255.0)
121# 	Set Net Mask (* = .)
130# 	Check Gateway   -  (192.168.15.1)
131# 	Set Gateway (* = .)
140# 	Check MAC Address
150# 	Check Firmware Version = (3.1.9C)
732668# 	Manual Reboot of Unit

My netgear router doesn't see the adaptor : see below basic details on
the router network.

ADSL Port
MAC Address 	00:18:4D:11:F8:69
IP Address 	##.##.##.## (Internet IP)
Network Type 	PPPoA
IP Subnet Mask 	255.255.255.255
Gateway IP Address 	195.189.158.102
Domain Name Server 	87.86.189.16

LAN Port
MAC Address 	00:18:4D:11:F8:68
IP Address 	192.168.0.1
DHCP 	On
IP Subnet Mask 	255.255.255.0

The only way I've managed to get into the PAP2 configuration menu is
to turn off DCHP and allocate a static IP - in this case 192.168.0.55
(but the router still doesn't see the adaptor) but I can login to the
web frontend via Firefox.

DHCP:	Disabled	Current IP:	192.168.0.55
Host Name:	LinksysPAP	Domain:
Current Netmask:	0.0.0.0	Current Gateway:
0.0.0.0
Primary DNS:
Secondary DNS:
Product Information
Product Name:	PAP2-NA	Serial Number:	FH900EC15081
Software Version:	3.1.9(LSc)	Hardware
Version:	0.03.4
MAC Address:	371217FD5031	Client Certificate:
Installed
Customization:	Not Customized
System Status
Current Time:	1/1/2003 12:07:14	Elapsed Time:
00:00:07
Broadcast Pkts Sent:	0	Broadcast Bytes Sent:
0
Broadcast Pkts Recv:	0	Broadcast Bytes Recv:
0
Broadcast Pkts Dropped:	0	Broadcast Bytes
Dropped:	0
RTP Packets Sent:	0	RTP Bytes Sent:	0
RTP Packets Recv:	0	RTP Bytes Recv:	0
SIP Messages Sent:	0	SIP Bytes Sent:	0
SIP Messages Recv:	0	SIP Bytes Recv:	0
External IP:

Looking at the above stats - seems to be that the internet is not
accessable - No external IP?

Any ideas where I'm going wrong?  Ideally I want the router to detect
it and allocate a IP address on the internet network accordlying.

Can anyone help?

Thanks.

Rich

[ Post a follow-up to this message ]

Rich wrote:
> Hi
>
> Just brought a LINKSYS PAP2-NA UNLOCKED from ebay - collected it
> today.  I'm having problems getting it to work.

<snip>

>
> The only way I've managed to get into the PAP2 configuration menu is
> to turn off DCHP and allocate a static IP - in this case 192.168.0.55
> (but the router still doesn't see the adaptor) but I can login to the
> web frontend via Firefox.
>
> DHCP:	Disabled	Current IP:	192.168.0.55
> 		Host Name:	LinksysPAP	Domain:
> 		Current Netmask:	0.0.0.0	Current Gateway:
> 0.0.0.0



The reason the first instance doesn't work is because of it's in a
seperate network (i.e: Not 192.168.0.0/24)

In the latter setting you'll need to set the DNS server and default
gateway.  Default gateway will be 192.168.0.1, DNS probably the same.

[ Post a follow-up to this message ]

"Rich" <richdotward@gmail.com> wrote in message
 news:3mlt439pisfph28p7sjft4mn6kul981gqh@
4ax.com...
> Hi
>
> Just brought a LINKSYS PAP2-NA UNLOCKED from ebay - collected it
> today.  I'm having problems getting it to work.
>
> Done a google but still no joy.
>
> Dial **** to access the IVR Menu, then enter 110#
>
> It then reads out : 192.168.15.113
>
> 100# Check DHCP (ENABLED)
> 101# Set DHCP (1=enable, 0=disable)
> 110# Check IP address  -  (192.168.15.113)
> 111# Set IP address (* = .)
> 120# Check Netmask -   (255.255.255.0)
> 121# Set Net Mask (* = .)
> 130# Check Gateway   -  (192.168.15.1)
> 131# Set Gateway (* = .)
> 140# Check MAC Address
> 150# Check Firmware Version = (3.1.9C)
> 732668# Manual Reboot of Unit
>
> My netgear router doesn't see the adaptor : see below basic details on
> the router network.
>
> ADSL Port
> MAC Address 00:18:4D:11:F8:69
> IP Address ##.##.##.## (Internet IP)
> Network Type PPPoA
> IP Subnet Mask 255.255.255.255
> Gateway IP Address 195.189.158.102
> Domain Name Server 87.86.189.16
>
> LAN Port
> MAC Address 00:18:4D:11:F8:68
> IP Address 192.168.0.1
> DHCP On
> IP Subnet Mask 255.255.255.0
>
> The only way I've managed to get into the PAP2 configuration menu is
> to turn off DCHP and allocate a static IP - in this case 192.168.0.55
> (but the router still doesn't see the adaptor) but I can login to the
> web frontend via Firefox.
>
> DHCP: Disabled Current IP: 192.168.0.55
> Host Name: LinksysPAP Domain:
> Current Netmask: 0.0.0.0 Current Gateway:
> 0.0.0.0
> Primary DNS:
> Secondary DNS:
> Product Information
> Product Name: PAP2-NA Serial Number: FH900EC15081
> Software Version: 3.1.9(LSc) Hardware
> Version: 0.03.4
> MAC Address: 371217FD5031 Client Certificate:
> Installed
> Customization: Not Customized
> System Status
> Current Time: 1/1/2003 12:07:14 Elapsed Time:
> 00:00:07
> Broadcast Pkts Sent: 0 Broadcast Bytes Sent:
> 0
> Broadcast Pkts Recv: 0 Broadcast Bytes Recv:
> 0
> Broadcast Pkts Dropped: 0 Broadcast Bytes
> Dropped: 0
> RTP Packets Sent: 0 RTP Bytes Sent: 0
> RTP Packets Recv: 0 RTP Bytes Recv: 0
> SIP Messages Sent: 0 SIP Bytes Sent: 0
> SIP Messages Recv: 0 SIP Bytes Recv: 0
> External IP:
>
> Looking at the above stats - seems to be that the internet is not
> accessable - No external IP?
>
> Any ideas where I'm going wrong?  Ideally I want the router to detect
> it and allocate a IP address on the internet network accordlying.
>
> Can anyone help?
>
> Thanks.
>
> Rich

I have a netgear router DG 834G and I had same thing the other day.

Do what Loz said, set Default gateway to 192.168.0.1

Did you buy it off billionax? If so why does it sate "Software Version:
3.1.9(LSc)"

It may be locked to a VOIP provider. mine came with "3.1.8 (LS)" Can you
access the ADMIN settings?

Make sure you set "Provision Enable is set to NO."

I updated mine to "v3.1.22-LS"

[ Post a follow-up to this message ]

On Sat, 19 May 2007 15:49:40 +0100, "It's Me" <spam@spam.spam> wrote:
2.168.0.55

>
>I have a netgear router DG 834G and I had same thing the other day.
>
>Do what Loz said, set Default gateway to 192.168.0.1
>

Tried setting the gateway to 192.168.0.1 but get IP no. 0.0.0.0 until
it gives in and uses the static one 192.168.0.55

>Did you buy it off billionax? If so why does it sate "Software Version:
>3.1.9(LSc)"
>

Yeah he's the guy.  Software version 3.1.9(LSc)

>It may be locked to a VOIP provider. mine came with "3.1.8 (LS)" Can you
>access the ADMIN settings?
>

It seems to be unlocked can access all the admin settings in the web
frontend.

>Make sure you set "Provision Enable is set to NO."
>
>I updated mine to "v3.1.22-LS"
>

DHCP:	Enabled	Current IP:	192.168.0.55
Host Name:	PAP2-NA	Domain:
Current Netmask:	255.255.255.0	Current
Gateway:	192.168.0.1
Primary DNS:	192.168.0.1
Secondary DNS:
Product Information
Product Name:	PAP2-NA	Serial Number:	FH900EC15081
Software Version:	3.1.9(LSc)	Hardware
Version:	0.03.4
MAC Address:	371217FD5031	Client Certificate:
Installed
Customization:	Not Customized
System Status
Current Time:	1/1/2003 12:48:13	Elapsed Time:
00:00:31
Broadcast Pkts Sent:	8	Broadcast Bytes Sent:
2736
Broadcast Pkts Recv:	772	Broadcast Bytes Recv:
49434
Broadcast Pkts Dropped:	0	Broadcast Bytes
Dropped:	0
RTP Packets Sent:	0	RTP Bytes Sent:	0
RTP Packets Recv:	0	RTP Bytes Recv:	0
SIP Messages Sent:	0	SIP Bytes Sent:	0
SIP Messages Recv:	0	SIP Bytes Recv:	0
External IP:

Thanks.

Rich

[ Post a follow-up to this message ]

"It's Me" <spam@spam.spam> wrote in message
news:464f0e7f$0$10736$db0fefd9@news.zen.co.uk...
>
> "Rich" <richdotward@gmail.com> wrote in message
>  news:3mlt439pisfph28p7sjft4mn6kul981gqh@
4ax.com... 
>
> I have a netgear router DG 834G and I had same thing the other day.
>
> Do what Loz said, set Default gateway to 192.168.0.1
>
> Did you buy it off billionax? If so why does it sate "Software Version:
> 3.1.9(LSc)"
>
> It may be locked to a VOIP provider. mine came with "3.1.8 (LS)" Can you
> access the ADMIN settings?
>
> Make sure you set "Provision Enable is set to NO."
>
> I updated mine to "v3.1.22-LS"
>
>
How did you load the firmware if it was locked?
Have a PAP2 that I bought understanding it was
unlocked, it isn't. Can't do anything with it and all
my internet searches suggest the same.

I've nothing to loose by having a play if you wouldn't
mind telling me how to and the location of the code.

[ Post a follow-up to this message ]

 
> How did you load the firmware if it was locked?
> Have a PAP2 that I bought understanding it was
> unlocked, it isn't. Can't do anything with it and all
> my internet searches suggest the same.
>
> I've nothing to loose by having a play if you wouldn't
> mind telling me how to and the location of the code.
>
>

Mine was not locked, sorry if I confused you.

[ Post a follow-up to this message ]

 
>
> DHCP: Enabled Current IP: 192.168.0.55
> Host Name: PAP2-NA Domain:
> Current Netmask: 255.255.255.0 Current
> Gateway: 192.168.0.1
> Primary DNS: 192.168.0.1
> Secondary DNS:


I am no expert on this infact a newbie too but some things dont look right
to me.

DHCP: Enabled Current IP: 192.168.0.55   <<< Looks right (I set mine up
manual to 192.168.0.100)
Host Name: PAP2-NA Domain:
Current Netmask: 255.255.255.0 Current
Gateway: 192.168.0.1    << Looks right if routers IP
Primary DNS: 192.168.0.1   <<< think this should be ISP DNS aadress, should
see value in router.

Have you setup router rules for PAP2 (port forwarding)?


TFTP UDP 69  >>> PAP2 IP (192.168.0.55)
UDP 10000 - 20000  >>> PAP2 IP (192.168.0.55)
UDP 53  >>> PAP2 IP (192.168.0.55)
UDP 5060 - 5070  >>> PAP2 IP (192.168.0.55)

[ Post a follow-up to this message ]

It's Me wrote: 
>
>
> I am no expert on this infact a newbie too but some things dont look
> right to me.
>
> DHCP: Enabled Current IP: 192.168.0.55   <<< Looks right (I set mine
> up manual to 192.168.0.100)
> Host Name: PAP2-NA Domain:
> Current Netmask: 255.255.255.0 Current
> Gateway: 192.168.0.1    << Looks right if routers IP
> Primary DNS: 192.168.0.1   <<< think this should be ISP DNS aadress,
> should see value in router.
>

Mine has my ISP DNS servers.

Though have DNS Server Order: set to DHCP,Manual.

DNS Query Mode: Parallel


> Have you setup router rules for PAP2 (port forwarding)?
>
>
> TFTP UDP 69  >>> PAP2 IP (192.168.0.55)
> UDP 10000 - 20000  >>> PAP2 IP (192.168.0.55)
> UDP 53  >>> PAP2 IP (192.168.0.55)
> UDP 5060 - 5070  >>> PAP2 IP (192.168.0.55)

Though mine I now have as DHCP: NO, this was yes and left it to do all
the work, but as I'm often moving cables / PCs around I set it to NO and
set it myself.

[ Post a follow-up to this message ]

On Sat, 19 May 2007 16:56:09 GMT, "{{{{{Welcome}}}}
}"
<bhx___spam@trapped___hotmail.co.uk> wrote:

>
>Mine has my ISP DNS servers.
>
>Though have DNS Server Order: set to DHCP,Manual.
>
>DNS Query Mode: Parallel
>

Must of been looking and playing around now for over 5 hours with no
luck.

Keep getting the error

Registration State: Can't connect to login server

I have tried the softphone and my sipgate.co.uk aacount works OK.  All
the firewall forwarding is in place.

Just don't know whats wrong - the internet not working or the voip
account settings.

Is there any way to check that it can see the internet?

What does "Can't connect to login server " even mean?  password wrong,
wrong server name, or no internet.

Plus the date is wrong - even with a GMT server in it
europe.pool.ntp.org which again leads me to the internet not
working???

Should External IP:be blank or show the external IP?

Rich

[ Post a follow-up to this message ]

It's Me has brought this to us :
> Here is a pic of what mine looks like.
>
> http://www.kenspace.myzen.co.uk/pics/pap2 pic.jpg

or, without the break:-

<http://www.kenspace.myzen.co.uk/pics/pap2%20pic.jpg>

[ Post a follow-up to this message ]