I am a QuickSilver user, and have been trying for a couple of WEEKS now
to post messages, and NONE of them EVER show up, not ONE. QuickSilver
goes through all of the motions, but nothing gets posted no matter WHICH
chain happens to be selected.

(If the above text looks familiar, it is because I posted an almost
identical message on 16-May-2007! See my Usenet Newsgroup posting,
Message-ID <Pine.LNX.4.61.0705200046070.6767@Bfjrtb.SbkInyyrl.arg>.
The problem -- whatever it is -- has returned.)         

I use "bananasplit" for the stats., "mixmin" for the server, and "borked"
for the exit remailer. I have deleted all the remailer documents ("Tools"
-> "Remailers" -> "Delete" button) and then updated them -- all to no
avail. I am at a loss! Help?????

--  _____    %%%%%%%%%  "Glenn P.,"  <C128UserDELETE-THIS@FVI.Net>  %%%%%%%%
%%
{~._.~}   -------------------------------------------------------------
----
_( Y )_   ...For what you see and hear depends a good deal on where you are
(:_~*~_  standing: it also depends on what sort of person you are...
(_)-(_)                             --Lewis, C.S.: "The Magician's Nephew",
=========                              Book I in "The Chronicles Of Narnia".

:: Take Note Of The Spam Block On My E-Mail Address! ::

[ Post a follow-up to this message ]

"Glenn P.," <C128UserDELETE-THIS@FVI.Net> wrote:

> (If the above text looks familiar, it is because I posted an almost
> identical message on 16-May-2007! See my Usenet Newsgroup posting,
> Message-ID <Pine.LNX.4.61.0705200046070.6767@Bfjrtb.SbkInyyrl.arg>.
> The problem -- whatever it is -- has returned.)         

What happened to Richard's support mailinglist?
He said apas was no use in answering QS questions.

[ Post a follow-up to this message ]

In article <Pine.LNX.4.61.0706011248140.4903@Bfjrtb.SbkInyyrl.arg>
"Glenn P.," <C128UserDELETE-THIS@FVI.Net> wrote:
>
> I am a QuickSilver user, and have been trying for a couple of WEEKS now
> to post messages, and NONE of them EVER show up, not ONE. QuickSilver
> goes through all of the motions, but nothing gets posted no matter WHICH
> chain happens to be selected.
>
> (If the above text looks familiar, it is because I posted an almost
> identical message on 16-May-2007! See my Usenet Newsgroup posting,
> Message-ID <Pine.LNX.4.61.0705200046070.6767@Bfjrtb.SbkInyyrl.arg>.
> The problem -- whatever it is -- has returned.)         
>
> I use "bananasplit" for the stats., "mixmin" for the server, and "borked"
> for the exit remailer. I have deleted all the remailer documents ("Tools"
> -> "Remailers" -> "Delete" button) and then updated them -- all to no
> avail. I am at a loss! Help?????

Let's see the template you are using.

[ Post a follow-up to this message ]

In article <Pine.LNX.4.61.0706011248140.4903@Bfjrtb.SbkInyyrl.arg>
"Glenn P.," <C128UserDELETE-THIS@FVI.Net> wrote:
>
> I am a QuickSilver user, and have been trying for a couple of WEEKS now
> to post messages, and NONE of them EVER show up, not ONE. QuickSilver
> goes through all of the motions, but nothing gets posted no matter WHICH
> chain happens to be selected.
>

I'm posting this with QS.

Have you tried uninstalling/reinstalling QS? I just had to do that with
my PGP program. Programs get corrupted from time to time.

If all the help you get here doesn't solve your problem, I suggest the
above line of action.

Here is the URL for QS help from its author
http://www.quicksilvermail.net/support.html

[ Post a follow-up to this message ]

On 01-Jun-07 at 9:10pm +0200, <nobody@dizum.com> wrote:
 
[vbcol=seagreen] 
[vbcol=seagreen]
> Let's see the template you are using.

Don't see why that would make a difference, since it DID work for about a
week, using the same template. Still... my template (edited for privacy)
is listed between the delimiting lines.

---Start-Of-Template---

Host: <My Mailhost Goes Here>
From: "Nickname" <Address@Here.XXX>
From: "Nickname" <Address@Here.XXX>
X-Himmel: "Nickname" <Address@Here.XXX>
Sign-On: Address@Here.XXX
Chain: banana,*,*,borked; copies=10
To: mail2news@m2n.mixmin.net, mail2news@dizum.com, mail2news@anon.lcs.mit.ed
u, mail2news@freedom.gmsociety.org
Subject: I Put The Subject Here
Newsgroups: And.The.Newsgroup(s).Here
Followup-To: And.The.Newsgroup(s).Here
Distribution: world

Message goes here...

---End-Of-Template---

--  _____    %%%%%%%%%  "Glenn P.,"  <C128UserDELETE-THIS@FVI.Net>  %%%%%%%%
%%
{~._.~}   -------------------------------------------------------------
----
_( Y )_   ...For what you see and hear depends a good deal on where you are
(:_~*~_  standing: it also depends on what sort of person you are...
(_)-(_)                             --Lewis, C.S.: "The Magician's Nephew",
=========                              Book I in "The Chronicles Of Narnia".

:: Take Note Of The Spam Block On My E-Mail Address! ::

[ Post a follow-up to this message ]

In article <Pine.LNX.4.61.0706011854250.17022@Bfjrtb.SbkInyyrl.arg>
"Glenn P.," <C128UserDELETE-THIS@FVI.Net> wrote:
>
> On 01-Jun-07 at 9:10pm +0200, <nobody@dizum.com> wrote:
> 
> 
> 
>
> Don't see why that would make a difference, since it DID work for about a
> week, using the same template. Still... my template (edited for privacy)
> is listed between the delimiting lines.
>
> ---Start-Of-Template---
>
> Host: <My Mailhost Goes Here>
> From: "Nickname" <Address@Here.XXX>
> From: "Nickname" <Address@Here.XXX>
> X-Himmel: "Nickname" <Address@Here.XXX>
> Sign-On: Address@Here.XXX
> Chain: banana,*,*,borked; copies=10
> To: mail2news@m2n.mixmin.net, mail2news@dizum.com, mail2news@anon.lcs.mit.
edu, mail2news@freedom.gmsociety.org
> Subject: I Put The Subject Here
> Newsgroups: And.The.Newsgroup(s).Here
> Followup-To: And.The.Newsgroup(s).Here
> Distribution: world
>
> Message goes here...
>
> ---End-Of-Template---
>

Remove mail2news@anon.lcs.mit.edu, mail2news@freedom.gmsociety.org
Remove X-Himmel: "Nickname" <Address@Here.XXX>
Remove Sign-On: Address@Here.XXX
Remove Distribution: world
Remove Followup-To: And.The.Newsgroup(s).Here
Change copies to 2 or 3, 10 is excessive, not necessary and
might be causing spam filters to kick in.
You might also want to try removing Banana.

[ Post a follow-up to this message ]

On 02-Jun-07 at 1:25am +0200, <anonymous@remailer.cyberiade.it> wrote:

> Remove mail2news@anon.lcs.mit.edu, mail2news@freedom.gmsociety.org
> Remove X-Himmel: "Nickname" <Address@Here.XXX>
> Remove Sign-On: Address@Here.XXX

I'm very dubious, but I'll try it.


> Remove Distribution: world
> Remove Followup-To: And.The.Newsgroup(s).Here

Now that I WON'T do, not unless it's proved that that's the source of the
problem -- those are standard newsgroup headers!


> Change copies to 2 or 3, 10 is excessive, not necessary and
> might be causing spam filters to kick in.

Interesting possibility about the filters! I'll reduce the copies to 5 (3
strikes me as too few).


> You might also want to try removing Banana.

I'll try that if the other things fail -- banana came highly recommended!

Thanks for the suggestions! Let's hope they help...

--
 ========================================
==================================
%%%%%%%%%%%%%%% "Glenn P.,"  <C128UserDELETE-THIS@FVI.Net> %%%%%%%%%%%%%%%
 ========================================
==================================
"If you wish to make an apple pie from scratch, you must first
invent the Universe."            ----------------------------------
--SAGAN, Carl: Cosmos (Episode 9),
"The Lives Of The Stars".

:: Take Note Of The Spam Block On My E-Mail Address! ::

[ Post a follow-up to this message ]

In article <Pine.LNX.4.61.0706012003050.9360@Bfjrtb.SbkInyyrl.arg>
"Glenn P.," <C128UserDELETE-THIS@FVI.Net> wrote:
>
> On 02-Jun-07 at 1:25am +0200, <anonymous@remailer.cyberiade.it> wrote:
> 
>
> I'm very dubious, but I'll try it.

Neither of those m2n are working and the others are for eelbash only.

>
> 
>
> Now that I WON'T do, not unless it's proved that that's the source of the
> problem -- those are standard newsgroup headers!

Distribution world is the default and followup is only needed if you
want replies to go to another group.

>
> 
>
> Interesting possibility about the filters! I'll reduce the copies to 5 (3
> strikes me as too few).

I use 2 all the time and never have a problem.

>
> 
>
> I'll try that if the other things fail -- banana came highly recommended!

You do want random remailers in case one is having a problem.
If banana in your case is having one, nothing will go through.

>
> Thanks for the suggestions! Let's hope they help...
>

You're welcome.

[ Post a follow-up to this message ]

I am "that" QuickSilver user, and I am STILL trying to post messages! NONE
of them EVER show up, not ONE. QuickSilver goes through all of the motions,
but nothing gets posted no matter WHICH chain happens to be selected.

I have deleted all the remailer documents ("Tools" -> "Remailers" -> "Delete
"
button) and then updated them -- all to no avail.

I use "bananasplit" for the stats., "mixmin" for the server, and have a
random exit remailer. (I originally used "borked", but as that wasn't
working, I went to random.) My current template is:

------Cut Here-----

Host:
From:
Chain: *,*,*; copies=2
To: mail2news@m2n.mixmin.net, mail2news@dizum.com
Subject:
Newsgroups:

[Message]
~~

------Cut Here-----

I am at a complete loss! Help?????

--  _____   %%%%%%%%%%% "Glenn P.," <C128UserDELETE-THIS@FVI.Net> %%%%%%%%%%
%
{~._.~}  --------------------------------------------------------------
---
_( Y )_   "I've never yet let a Southern girl down." (Pause.) "Of course,
(:_~*~_   to be fair, I've never picked one up."
(_)-(_)                               --Richard Dawson, on "Family Feud".

:: Take Note Of The Spam Block On My E-Mail Address! ::

[ Post a follow-up to this message ]

In article
<Pine.LNX.4.61.0706091205460.19714@Bfjrtb.SbkInyyrl.arg>
"Glenn P.," <C128UserDELETE-THIS@FVI.Net> wrote:
>
> I am "that" QuickSilver user, and I am STILL trying to post messages! NONE
> of them EVER show up, not ONE. QuickSilver goes through all of the motions
,
> but nothing gets posted no matter WHICH chain happens to be selected.
>
> I have deleted all the remailer documents ("Tools" -> "Remailers" -> "Dele
te"
> button) and then updated them -- all to no avail.
>
> I use "bananasplit" for the stats., "mixmin" for the server, and have a
> random exit remailer. (I originally used "borked", but as that wasn't
> working, I went to random.) My current template is:
>
> ------Cut Here-----
>
> Host:
> From:
> Chain: *,*,*; copies=2
> To: mail2news@m2n.mixmin.net, mail2news@dizum.com
> Subject:
> Newsgroups:
>
> [Message]
> ~~
>
> ------Cut Here-----
>
> I am at a complete loss! Help?????

This message is posted via QS, so let's see what the
difference is.

My template (for using Panta SMTP server):

#Host: www.panta-rhei.eu.org
#From: somebody@anybody.else
#From: Nickname <anickname@anybody.else>
#Chain: panta,*,*,borked; copies=4
#To: mail2news@dizum.com, mail2news@m2n.mixmin.net
#References:
<Pine.LNX.4.61.0706091205460.19714@Bfjrtb.SbkInyyrl.arg>
#Newsgroups: alt.privacy.anon-server
#Subject: Re: Can't Anon Post Via QS. Help!

Remove the "#"

Dodo
(That's a nickname, not a comment.)

[ Post a follow-up to this message ]