06-22-07 06:11 PM
The same on the 7912, you have to modify the Line Text Label to display the
extension. That's the only way I found. The 7910s used to have the same prob
lem, so they added a CallManager service parameter Extension Display on Cisc
o IP Phone Model 7910* that removed the external calling mask from the phon
e and displayed only the extension. Unfortunately, this does not help with t
he 7912s.
Interestingly enough, the 7911s do not have this problem. The DN is automati
cally lowered to the line below when an external calling mask is added to th
e DN configuration.
----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo." WJR
----- Original Message -----
From: Kelemen Zoltan
To: cisco-voip@puck.nether.net
Sent: Friday, June 22, 2007 8:05 AM
Subject: [cisco-voip] External Phone Number Mask
Hi!
I have a CCM 4.1.3 and several 7905G phones. For soem of the phones I'd
like to apply separate External Phone Number Masks, but now the mask
appears on the phone instead of it's DN. Is there a way to keep the DN
in the upper-right corner, instead of the external phone mask?
(I am using external phone masks on route patterns as well, but a few
phones need to have an external number that just doesn't fit that mask.)
thanks,
Zoltan
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
| 
