I setup a MGCP VGW with FXO.  I have set it in CM to forward to my
extension(both).  CSS / Partitions seem to be right.  But when I call
those FXO ports, I get dial tone.  What's up?  What am I doing wrong?

 

Scott

[ Post a follow-up to this message ]

How many digits do you see from the telco?  From what I remember when I 
have done this I was getting 7 digits and that matched the number on the 
phone?  Can you dial outbound?



"Voll, Scott" <Scott.Voll@wesd.org> 
Sent by: cisco-voip-bounces@puck.nether.net
06/25/2007 03:19 PM

To
"cisco-voip" <cisco-voip@puck.nether.net>
cc

Subject
[cisco-voip] When dialing FXO I get Dial tone?






I setup a MGCP VGW with FXO.  I have set it in CM to forward to my 
extension(both).  CSS / Partitions seem to be right.  But when I call 
those FXO ports, I get dial tone.  What’s up?  What am I doing wrong?
 
 Scott___________________________________
____________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]

the mgcp dial-peers have to be first ahead of any h323 dialpeers

this was discussed on the list a while back, that's why i know. ;)

----------------------------------------------------------------------------
----
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."      WJR

----- Original Message ----- 
From: Voll, Scott 
To: cisco-voip 
Sent: Monday, June 25, 2007 3:19 PM
Subject: [cisco-voip] When dialing FXO I get Dial tone?


I setup a MGCP VGW with FXO.  I have set it in CM to forward to my extension
(both).  CSS / Partitions seem to be right.  But when I call those FXO ports
, I get dial tone.  What's up?  What am I doing wrong?

 

Scott



----------------------------------------------------------------------------
--


 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]

I looks like a registration issue.

 

It's coming back on a VPN connection and I'm having issues with full
registration.  Looking into it now.

 

Scott

 

________________________________

From: Lelio Fulgenzi [mailto:lelio@uoguelph.ca] 
Sent: Monday, June 25, 2007 1:04 PM
To: Voll, Scott; cisco-voip
Subject: Re: [cisco-voip] When dialing FXO I get Dial tone?

 

 

the mgcp dial-peers have to be first ahead of any h323 dialpeers

 

this was discussed on the list a while back, that's why i know. ;)

 

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * university of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Buffalo buffalo Buffalo buffalo buffalo buffalo Buffalo buffalo."
WJR

----- Original Message ----- 

From: Voll, Scott <mailto:Scott.Voll@wesd.org>  

To: cisco-voip <mailto:cisco-voip@puck.nether.net>  

Sent: Monday, June 25, 2007 3:19 PM

Subject: [cisco-voip] When dialing FXO I get Dial tone?

 

I setup a MGCP VGW with FXO.  I have set it in CM to forward to
my extension(both).  CSS / Partitions seem to be right.  But when I call
those FXO ports, I get dial tone.  What's up?  What am I doing wrong?

 

Scott

	
________________________________


 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]