Hi,

I am attempting to upgrade to RH7 using a DVD.iso on my hard drive, and
can not figure out how to get the RH7 install to find the DVD.iso.

The iso is in the /iso directory on my IDE hard drive.  When the iso is
mounted and a df is performed, I get the following:

Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
150485084  50010024  92707408  36% /
/dev/hda1               101086     29483     66384  31% /boot
/dev/shm                387500         0    387500   0% /dev/shm
/iso/F-7-i386-DVD.iso
2832620   2832620         0 100% /mnt/iso

The install boots OK with the FC7 vmlinuz and initrd.img in the /boot
directory.  When prompted for the location of the iso, if I hit F2 and
select hda, I get to the boot directory.  I am stumped as to the correct
format required to point the upgrade process to the location of the FC7
iso.  When the iso is mounted under /mnt/iso on my existing RH install, I
have full access to the contents of the DVD image.

Any help would be appreciated.

Tim

--
No BoomBoom for me tpendleton@BoomBoomYahoo.com

[ Post a follow-up to this message ]

The Guy wrote:
> Hi,
>
> I am attempting to upgrade to RH7 using a DVD.iso on my hard drive, and
> can not figure out how to get the RH7 install to find the DVD.iso.
>
> The iso is in the /iso directory on my IDE hard drive.  When the iso is
> mounted and a df is performed, I get the following:
>
> Filesystem           1K-blocks      Used Available Use% Mounted on
> /dev/mapper/VolGroup00-LogVol00
>                      150485084  50010024  92707408  36% /
> /dev/hda1               101086     29483     66384  31% /boot
> /dev/shm                387500         0    387500   0% /dev/shm
> /iso/F-7-i386-DVD.iso
>                        2832620   2832620         0 100% /mnt/iso
>
> The install boots OK with the FC7 vmlinuz and initrd.img in the /boot
> directory.  When prompted for the location of the iso, if I hit F2 and
> select hda, I get to the boot directory.  I am stumped as to the correct
> format required to point the upgrade process to the location of the FC7
> iso.  When the iso is mounted under /mnt/iso on my existing RH install, I
> have full access to the contents of the DVD image.
>
> Any help would be appreciated.
>
> Tim
>
Tim,


Probably anaconda (the installer) is not able to mount the DVD. Have you
tried to copy the DVD content to a harddisk directory.


Best regards,


Jan Gerrit Kootstra

[ Post a follow-up to this message ]

On Tue, 10 Jul 2007 17:26:37 +0200, Jan Gerrit Kootstra wrote:

> The Guy wrote: 
> Tim,
>
>
> Probably anaconda (the installer) is not able to mount the DVD. Have you
> tried to copy the DVD content to a harddisk directory.
>
>
> Best regards,
>
>
> Jan Gerrit Kootstra

Jan,

The error message I experience is basically that no iso is found on the
partition.  I suspect that this is due to an OHI (Operator Headspace
Issue) rather than a mount failure.  I am likely not providing the
installer with the correct syntax to find the iso.

If the iso was found and then not mounted, I would anticipate a failure
to mount type of error message.


Tim


--
No BoomBoom for me tpendleton@BoomBoomYahoo.com

[ Post a follow-up to this message ]

The Guy wrote:
> I am attempting to upgrade to RH7 using a DVD.iso on my hard drive,
> and can not figure out how to get the RH7 install to find the DVD.iso.
>
> The iso is in the /iso directory on my IDE hard drive.  When the iso
> is mounted and a df is performed, I get the following:
>
> Filesystem           1K-blocks      Used Available Use% Mounted on
> /dev/mapper/VolGroup00-LogVol00
>                      150485084  50010024  92707408  36% /

You can't do a hard disk install from a LVM volume:
http://docs.fedoraproject.org/insta...ve.
html
The .iso file must be on a ext2, ext3 or vfat partition that doesn't get
overwritten during installation.

--
Markku Kolkka
markku.kolkka@iki.fi

[ Post a follow-up to this message ]

On Wed, 11 Jul 2007 11:51:25 +0300, Markku Kolkka wrote:

> The Guy wrote: 
>
> You can't do a hard disk install from a LVM volume:
> http://docs.fedoraproject.org/insta...v
e.html
> The .iso file must be on a ext2, ext3 or vfat partition that doesn't get
> overwritten during installation.

Ah..That makes sense.  Thank you!

--
No BoomBoom for me tpendleton@BoomBoomYahoo.com

[ Post a follow-up to this message ]