I have to use number translation at branch office as local numbers
send out through SRST gateway. Because uses at remote office has main
office area numbers so, when they call to their local numbers calling
party phone should display branch office area number which allocated
to SRST ISDN BRI lines. I think with H323 I can easily do this using
translation at SRST gateway level. Are you agree with me?


On 7/22/07, Lelio Fulgenzi <lelio@uoguelph.ca> wrote:
> Yes, you still have to add the gateway either way. There are various
> benefits for each one. I'm sure it's a little like MAC vs Windows. ;)
>
> The one benefit to H323 that I just came across after re-reading some CIPT
UG
> notes is that an MGCP gateway is controlled by one and only one cluster.
> With an H323 gateway, anything can use it.
>
> ----- Original Message -----
> From: "Manoj Kalpage" <manoj.kalpage@gmail.com>
> To: "Lelio Fulgenzi" <lelio@uoguelph.ca>
> Cc: <cisco-voip@puck.nether.net>
> Sent: Saturday, July 21, 2007 9:42 PM
> Subject: Re: [cisco-voip] Local call send out from SRST gatewayr when 
not
> inSRST mode
>
> 
>
>

[ Post a follow-up to this message ]