Hi,

I try to configure onramp faxing on a 2821. When I do test call to the
onramp fax number I can hear the well known fax sounds, but when I try
to test it with a real fax machine nothing happens, no q931 debug output
, and on the fax machine I receive a busy signal. What I made wrong?

[ Post a follow-up to this message ]

Is this on net? If so, check Codec.

Scott

-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Stift
Sent: Tuesday, July 24, 2007 12:38 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] onramp config problem


Hi,

I try to configure onramp faxing on a 2821. When I do test call to the
onramp fax number I can hear the well known fax sounds, but when I try
to test it with a real fax machine nothing happens, no q931 debug output

, and on the fax machine I receive a busy signal. What I made wrong?

 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]