Hi All,



I have a customer who is having problems with their main number. They have a
new PRI and all the DID's on the PRI works fine but the main number is not
working.

I am getting the following error when I call the number.


Bearer Capability i = 0x8090A2

Standard = CCITT

Transfer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA98382

Exclusive, Channel 2

Facility i =  0x9F8B0100A10F02010106072A8648CE1500040A
0100

Protocol Profile =  Networking Extensions

0xA10F02010106072A8648CE1500040A0100

Component = Invoke component

Invoke Id = 1

Operation = InformationFollowing (calling_name)

Name information in subsequent FACILITY
message

Calling Party Number i = 0x2183, '3129251265'

Plan:ISDN, Type:National

Called Party Number i = 0xC1, '6513328000'

Plan:ISDN, Type:Subscriber(local)

Jul 26 16:48:46.606: ISDN Se0/1/0:23 Q931: TX -> SETUP_ACK pd = 8  callref =
0xA43A

Channel ID i = 0xA98382

Exclusive, Channel 2

Jul 26 16:48:46.618: ISDN Se0/1/0:23 Q931: RX <- STATUS pd = 8  callref =
0x243A

Cause i = 0x80E10D - Message type not implemented



Has anybody experienced this and is there something I need to be aware of or
change in Call manager to make this work. Please let me know.





Thanks


Param Singh

[ Post a follow-up to this message ]

MGCP or H323?  Does the H323 router have the extension or is the
extension in CM for MGCP?

 

Scott

 

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of param singh
Sent: Thursday, July 26, 2007 7:30 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Message type not implemented

 

Hi All, 

 

I have a customer who is having problems with their main number. They
have a new PRI and all the DID's on the PRI works fine but the main
number is not working. 

I am getting the following error when I call the number.  

 

Bearer Capability i = 0x8090A2 

Standard = CCITT 

Transfer Capability = Speech  

Transfer Mode = Circuit 

Transfer Rate = 64 kbit/s 

Channel ID i = 0xA98382 

Exclusive, Channel 2 

Facility i =  0x9F8B0100A10F02010106072A8648CE1500040A
0100 

Protocol Profile =  Networking Extensions 

0xA10F02010106072A8648CE1500040A0100 

Component = Invoke component 

Invoke Id = 1 

Operation = InformationFollowing (calling_name) 

Name information in subsequent FACILITY
message 

Calling Party Number i = 0x2183, '3129251265' 

Plan:ISDN, Type:National 

Called Party Number i = 0xC1, '6513328000' 

Plan:ISDN, Type:Subscriber(local)

Jul 26 16:48:46.606: ISDN Se0/1/0:23 Q931: TX -> SETUP_ACK pd = 8
callref = 0xA43A 

Channel ID i = 0xA98382 

Exclusive, Channel 2

Jul 26 16:48:46.618: ISDN Se0/1/0:23 Q931: RX <- STATUS pd = 8  callref
= 0x243A 

Cause i = 0x80E10D - Message type not implemented

 

Has anybody experienced this and is there something I need to be aware
of or change in Call manager to make this work. Please let me know. 

 

 

Thanks

 
Param Singh

[ Post a follow-up to this message ]

I'm encountering this "message type not implemented"
on a customer line but encountering no issues so I
don't think it is prudent to assume that is the error
behind your customer's problem.


--- param singh <paramds@gmail.com> wrote:

> Hi All,
>
>
>
> I have a customer who is having problems with their
> main number. They have a
> new PRI and all the DID's on the PRI works fine but
> the main number is not
> working.
>
> I am getting the following error when I call the
> number.
>
>
> Bearer Capability i = 0x8090A2
>
>                 Standard = CCITT
>
>                 Transfer Capability = Speech
>
>                 Transfer Mode = Circuit
>
>                 Transfer Rate = 64 kbit/s
>
>         Channel ID i = 0xA98382
>
>                 Exclusive, Channel 2
>
>         Facility i =
>  0x9F8B0100A10F02010106072A8648CE1500040A
0100
>
>                 Protocol Profile =  Networking
> Extensions
>
>                 0xA10F02010106072A8648CE1500040A0100
>
>                 Component = Invoke component
>
>                         Invoke Id = 1
>
>                         Operation =
> InformationFollowing (calling_name)
>
>                                 Name information in
> subsequent FACILITY
> message
>
>         Calling Party Number i = 0x2183,
> '3129251265'
>
>                 Plan:ISDN, Type:National
>
>         Called Party Number i = 0xC1, '6513328000'
>
>                 Plan:ISDN, Type:Subscriber(local)
>
> Jul 26 16:48:46.606: ISDN Se0/1/0:23 Q931: TX ->
> SETUP_ACK pd = 8  callref =
> 0xA43A
>
>         Channel ID i = 0xA98382
>
>                 Exclusive, Channel 2
>
> Jul 26 16:48:46.618: ISDN Se0/1/0:23 Q931: RX <-
> STATUS pd = 8  callref =
> 0x243A
>
>         Cause i = 0x80E10D - Message type not
> implemented
>
>
>
> Has anybody experienced this and is there something
> I need to be aware of or
> change in Call manager to make this work. Please let
> me know.
>
>
>
>
>
> Thanks
>
>
> Param Singh 
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>




 ________________________________________
____________________________________
________
Building a website is a piece of cake. Yahoo! Small Business gives you all t
he tools to get online.
http://smallbusiness.yahoo.com/webhosting

[ Post a follow-up to this message ]