07-31-07 06:11 PM
No, it is done trough the CM
This is how the port looks like
dial-peer voice XXX pots
application mgcpapp
port X/X/X
Walter Ocampo
System Network Analyst
Office of Information Technology
540 S.E 3rd. Ave, Suite 300
Fort Lauderdale, FL 33301
(954) 357 8041 Cell (954) 632 8228
wocampo@broward.org
From: Scott Voll [mailto:svoll.voip@gmail.com]
Sent: Monday, July 30, 2007 4:40 PM
To: Ocampo, Walter
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] FXS Fax config
so theres nothing on the actually voice Port? its all done in CM?
Scott
On 7/30/07, Ocampo, Walter <WOCAMPO@broward.org> wrote:
I am using the following configuration: with an MGCP gateway.
mgcp call-agent x.x.x.x 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp modem passthrough voip redundancy
mgcp package-capability rtp-package
no mgcp package-capability res-package
mgcp package-capability sst-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
!
mgcp profile default
Walter Ocampo
System Network Analyst
Office of Information Technology
540 S.E 3rd. Ave, Suite 300
Fort Lauderdale, FL 33301
(954) 357 8041 Cell (954) 632 8228
wocampo@broward.org
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Scott Voll
Sent: Monday, July 30, 2007 1:56 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] FXS Fax config
Can someone send me a standard FAX FXS configuration please.
Thanks
Scott
[ Post a follow-up to this message ]
| 
