You can limit the outbound calls with the controller configuration,
timeslot configuration. 

 

The inbound will be controlled by the telco.

 

What I would do would be to find out what the hunting method the Telco
is using, top-down, or bottom up and configure the CCM(Assuming MGCP)
for the opposite.

 

 

 

Johnny Crothers

IPT Specialist

________________________________

From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of
Mudassar.Khalid/NE/Lahore
Sent: 31 July 2007 09:55
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Seggregation of Pri for inbound and outbound
dialing..

 

Hi all,

I want to segregate PRI in such way that i could use channel 1 to 10 for
inbound calls and 11 to 21 for outbound calls.Can anyone tell me about
the possibility of this scenario and if yes then how it would be
possible?(A guidline for configuration)

 

Kind Regards,

Mudassar Khalid

Network support Engineer

O&M Lahore NEPL

Cell : (0092) 0322-4481004



 ****************************************
******************************
Any opinions expressed in the email are those of the individual and not nece
ssarily the company. This email and any files transmitted with it are confid
ential and solely for the use of the intended recipient.  If you are not the
 intended recipient or the person responsible for delivering it to the inten
ded recipient, be advised that you have received this email in error and tha
t any dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with the c
ontent of this email please e-mail to: e-security.support@vanco.info

The contents of an attachment to this e-mail may contain software viruses wh
ich could damage your own computer system. While the sender has taken every 
reasonable precaution to minimise this risk, we cannot accept liability for 
any damage which you sustain as a result of software viruses. You shouldcarr
y out your own virus checks before opening any attachments to this e-mail. 

Vanco UK Ltd Registered in England No: 2296733 Registered Office: John Busch
 House, 277 London Road, Isleworth, Middlesex TW7 5AX

Please consider the environment before printing this e-mail
 ****************************************
******************************

[ Post a follow-up to this message ]