08-16-07 06:11 PM
I should have mentioned that it is already sip5.2, so **# doesn't work.
Matt Slaga (US) wrote:
> Press Settings, **# (to unlock), press Network Settings, 33, then select
> "Yes".
>
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net
> [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Peder @
> NetworkOblivion
> Sent: Thursday, August 16, 2007 12:22 PM
> To: cisco-voip@puck.nether.net
> Subject: [cisco-voip] Factory reset pre UAL 7900
>
> Can anybody tell me how to factory reset a 7940 that is pre UAL? The #
> key during reboot doesn't work and there is a password on there, so I
> can't do it that way. I've googled it several ways and the only thing I
>
> can find is using the # key (which as I said doesn't work)...
>
> Peder
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> -----------------------------------------
> Disclaimer:
>
> This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the
> designated addressee(s) named above only. If you are not the
> intended addressee, you are hereby notified that you have received
> this communication in error and that any use or reproduction of
> this email or its contents is strictly prohibited and may be
> unlawful. If you have received this communication in error, please
> notify us immediately by replying to this message and deleting it
> from your computer. Thank you.
>
>
[ Post a follow-up to this message ]
| 
