I'm installing CER for the first time and I'm a little confused.

in the admin install doc you setup two different Route Points for 911.  one
in the Phone partition and one in the E911 partition.  both of which are in
the E911 CSS which includes both partitions in the first place.  Can some
one shed some light on this as I'm trying my best to get my head rapped
around this install.

TIA

Scott

[ Post a follow-up to this message ]

One is the RP for Primary CER server, the second one
"912" or whatever is for the standby server in the
event that the primary is down, on the primary 911 RP
you're setting CFwdB, CFwdNA and CFwdF to 912 and
allowing it visibility to the E911CSS. This will send
the call to the standby server in the event the
primary is not reachable.
Ted



--- Scott Voll <svoll.voip@gmail.com> wrote:

> I'm installing CER for the first time and I'm a
> little confused.
>
> in the admin install doc you setup two different
> Route Points for 911.  one
> in the Phone partition and one in the E911
> partition.  both of which are in
> the E911 CSS which includes both partitions in the
> first place.  Can some
> one shed some light on this as I'm trying my best to
> get my head rapped
> around this install.
>
> TIA
>
> Scott 
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip




 ________________________________________
____________________________________
________
Pinpoint customers who are looking for what you sell.
http://searchmarketing.yahoo.com/

[ Post a follow-up to this message ]