Do I use the mac address of the bonded interface from when I did a "set
network failover enable" or do I use the EthX mac address?

 

On the PAK website do I ever enter the mac address of the subscriber?

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.

[ Post a follow-up to this message ]

For the Node license do I use the publisher mac for both PAKs? (I have 1
pub, 1 sub)

 

From: Wes Sisk [mailto:wsisk@cisco.com] 
Sent: Wednesday, September 19, 2007 2:49 PM
To: Jason Aarons (US)
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CCM 5.1 PAK MAC address

 

physical addr, not virtual addr.

never enter subscriber mac.

/Wes

Jason Aarons (US) wrote: 

Do I use the mac address of the bonded interface from when I did a "set
network failover enable" ordo I use the EthX mac address?

 

On the PAK website do I ever enter the mac address of the subscriber?

 



________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and thatany use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communicationin error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

 


________________________________



 
 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you havereceived this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.

[ Post a follow-up to this message ]

my experience is that bonded interface will use the MAC from the
primary eth interface.

On 9/19/07, Jason Aarons (US) <jason.aarons@us.didata.com> wrote:
>
>
>
>
> Do I use the mac address of the bonded interface from when I did a "set
> network failover enable" or do I use the EthX mac address?
>
>
>
> On the PAK website do I ever enter the mac address of the subscriber?
>
>
>
>
>
>
> ________________________________
>
>
>
>
>  Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleti
ng
> it from your computer. Thank you.
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

[ Post a follow-up to this message ]