09-22-07 12:11 AM
Your problem is most likely with your file format. Edit the xml file in =
Notepad, not MS Word.
Anthony
Erik Erasmus (E) wrote:
>
> Hi
>
> I am trying to use the system speed dial / Local speed dial feature =
> with CCME ver 4-2 .
>
> I created a xml file as below from a sample and have the following =
> commands entered
>
> ip http server
>
> ip http authentication local
>
> no ip http secure-server
>
> ip http path flash:
>
> !
>
> But get a XML Error [4] Parse error
>
> Saved the file using MSword.
>
> My XML file called speeddial.xml below =85 in flash of my cmy
>
> <CiscoIPPhoneDirectory>
>
> <Title>Local Speed Dial</Title>
>
> <Prompt>Record 1 to 1 of 1 </Prompt>
>
> <DirectoryEntry>
>
> <Name>test1</Name>
>
> <Telephone>11111</Telephone>
>
> </DirectoryEntry>
>
> <DirectoryEntry>
>
> <Name>Marketing</Name>
>
> <Telephone>71234</Telephone>
>
> </DirectoryEntry>
>
> <DirectoryEntry>
>
> <Name>Tech Support</Name>
>
> <Telephone>71432</Telephone>
>
> </DirectoryEntry>
>
> </CiscoIPPhoneDirectory>
>
> Erik Erasmus
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~
> This e-mail is subject to the Telkom SA electronic communication legal =
> notice, available at :
> http://www.telkom.co.za/TelkomEMailLegalNotice.PDF
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> ------------------------------------------------------------------------
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|