Hi,

Very strange one with Speed Dial in CCM 4.2


If I dial the number it connects to another IP phone no problem.
If I enter that same exact number into Speed Dial, it waits for an
interdigit timeout then asks for a CMC code.

Any ideas what may be going on here?

-Erik


 ****************************************
*******************************

This communication is not intended to be used, and cannot be used,
by the recipient or any other person for the purpose of avoiding United
States federal tax penalties that may be imposed on the recipient or
such other person. In addition, if any United States federal tax
advice contained in this communication is used or referred to in
promoting, marketing or recommending any corporation, partnership
or other entity, investment plan, concept, structure or arrangement
(which should be assumed to be the case by a recipient or other
person who is not our client with respect to the subject matter of the
communication), then (i) such tax advice should be construed as written
to support the promotion or marketing of the transactions or matters
addressed by the advice and (ii) the recipient or other person should
seek advice based on the recipient or other person's particular
circumstances from an independent tax advisor. For further information,
please go to http://www.shearman.com/disclaimer/tax_disclosure.html

 ****************************************
*******************************

This transmittal and/or attachments may be a confidential
attorney-client communication or may otherwise be privileged or
confidential. If you are not the intended recipient, you are hereby
notified that you have received this transmittal in error; any review,
dissemination, distribution or copying of this transmittal is strictly
prohibited. If you have received this transmittal and/or attachments in
error, please notify us immediately by reply or by telephone (call us
collect at +1 212-848-8400) and immediately delete this message and
all its attachments.

Shearman & Sterling LLP is a limited liability partnership organized in
the United States under the laws of the State of Delaware, which laws
limit the personal liability of partners.

[ Post a follow-up to this message ]

There is an enterprise param for this.  Something along the lines of wait
for more digits on speed dial.  This is most likely set to true

Craig

On 9/25/07, Erik Stillman <Erik.Stillman@shearman.com> wrote:
>
> Hi,
>
> Very strange one with Speed Dial in CCM 4.2
>
>
> If I dial the number it connects to another IP phone no problem.
> If I enter that same exact number into Speed Dial, it waits for an
> interdigit timeout then asks for a CMC code.
>
> Any ideas what may be going on here?
>
> -Erik
>
>
>  ****************************************
*******************************
>
> This communication is not intended to be used, and cannot be used,
> by the recipient or any other person for the purpose of avoiding United
> States federal tax penalties that may be imposed on the recipient or
> such other person. In addition, if any United States federal tax
> advice contained in this communication is used or referred to in
> promoting, marketing or recommending any corporation, partnership
> or other entity, investment plan, concept, structure or arrangement
> (which should be assumed to be the case by a recipient or other
> person who is not our client with respect to the subject matter of the
> communication), then (i) such tax advice should be construed as written
> to support the promotion or marketing of the transactions or matters
> addressed by the advice and (ii) the recipient or other person should
> seek advice based on the recipient or other person's particular
> circumstances from an independent tax advisor. For further information,
> please go to http://www.shearman.com/disclaimer/tax_disclosure.html
>
>  ****************************************
*******************************
>
> This transmittal and/or attachments may be a confidential
> attorney-client communication or may otherwise be privileged or
> confidential. If you are not the intended recipient, you are hereby
> notified that you have received this transmittal in error; any review,
> dissemination, distribution or copying of this transmittal is strictly
> prohibited. If you have received this transmittal and/or attachments in
> error, please notify us immediately by reply or by telephone (call us
> collect at +1 212-848-8400) and immediately delete this message and
> all its attachments.
>
> Shearman & Sterling LLP is a limited liability partnership organized in
> the United States under the laws of the State of Delaware, which laws
> limit the personal liability of partners.
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>



--
Craig Staffin
Craig@staffin.org
(H) 262-437-7313
(C) 262-613-6003

[ Post a follow-up to this message ]

Thank you Craig. That's good to know.
 
 
It turned out that this problem was caused by an incorrect CSS on the
line.
Still very odd that I could go off hook and dial it without incident??
 
thanks

________________________________

From: cmstaffin@gmail.com [mailto:cmstaffin@gmail.com] On Behalf Of
Craig Staffin
Sent: Tuesday, September 25, 2007 6:18 PM
To: Erik Stillman
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] speed dial


There is an enterprise param for this.  Something along the lines of
wait for more digits on speed dial.  This is most likely set to true

Craig


On 9/25/07, Erik Stillman <Erik.Stillman@shearman.com> wrote: 

Hi,
	
Very strange one with Speed Dial in CCM 4.2
	
	
If I dial the number it connects to another IP phone no problem.
If I enter that same exact number into Speed Dial, it waits for
an
interdigit timeout then asks for a CMC code. 
	
Any ideas what may be going on here?
	
-Erik
	
	
	
 ****************************************
*******************************
	
This communication is not intended to be used, and cannot be
used,
by the recipient or any other person for the purpose of avoiding
United 
States federal tax penalties that may be imposed on the
recipient or
such other person. In addition, if any United States federal tax
advice contained in this communication is used or referred to in
promoting, marketing or recommending any corporation,
partnership 
or other entity, investment plan, concept, structure or
arrangement
(which should be assumed to be the case by a recipient or other
person who is not our client with respect to the subject matter
of the
communication), then (i) such tax advice should be construed as
written 
to support the promotion or marketing of the transactions or
matters
addressed by the advice and (ii) the recipient or other person
should
seek advice based on the recipient or other person's particular
circumstances from an independent tax advisor. For further
information, 
please go to
http://www.shearman.com/disclaimer/tax_disclosure.html
	
	
 ****************************************
*******************************
	
This transmittal and/or attachments may be a confidential
attorney-client communication or may otherwise be privileged or
confidential. If you are not the intended recipient, you are
hereby
notified that you have received this transmittal in error; any
review, 
dissemination, distribution or copying of this transmittal is
strictly
prohibited. If you have received this transmittal and/or
attachments in
error, please notify us immediately by reply or by telephone
(call us 
collect at +1 212-848-8400) and immediately delete this message
and
all its attachments.
	
Shearman & Sterling LLP is a limited liability partnership
organized in
the United States under the laws of the State of Delaware, which
laws 
limit the personal liability of partners.
 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
	




-- 
Craig Staffin
Craig@staffin.org
(H) 262-437-7313
(C) 262-613-6003 

[ Post a follow-up to this message ]