Hi,

I need help!!

I=B4ve tryed to configure Meet-Me on a ccme, but it will not work!!

Have anybody tryed to configure it?

I=B4ve attatch my config and below is my "show ver"



CCME-lab#show ver
Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4(15)T1=
, =

RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Wed 18-Jul-07 06:22 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)

CCME-lab uptime is 17 hours, 58 minutes
System returned to ROM by reload at 15:45:31 CUT Thu Nov 22 2007
System restarted at 15:46:53 CUT Thu Nov 22 2007
System image file is "flash:c2800nm-ipvoicek9-mz.124-15.T1.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing cisco cryptographic products may be found =
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FCZ092372QP
11 FastEthernet interfaces
1 Channelized E1/PRI port
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


Can sombody please help me??

Michael from Denmark

[ Post a follow-up to this message ]

Michael

I don't see the config, can you post it or attach it again?

Kevin


On 11/23/07, ano-1@worldonline.dk <ano-1@worldonline.dk> wrote:
>
>
>
> Hi,
>
> I need help!!
>
> I´ve tryed to configure Meet-Me on a ccme, but it will not work!!
>
> Have anybody tryed to configure it?
>
> I´ve attatch my config and below is my "show ver"
>
>
>
> CCME-lab#show ver
> cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4
> (15)T1,
> RELEASE SOFTWARE (fc2)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2007 by cisco Systems, Inc.
> Compiled Wed 18-Jul-07 06:22 by prod_rel_team
>
> ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
>
> CCME-lab uptime is 17 hours, 58 minutes
> System returned to ROM by reload at 15:45:31 CUT Thu Nov 22 2007
> System restarted at 15:46:53 CUT Thu Nov 22 2007
> System image file is "flash:c2800nm-ipvoicek9-mz.124-15.T1.bin"
>
>
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing cisco cryptographic products may be found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email to
> export@cisco.com.
>
> cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
> Processor board ID FCZ092372QP
> 11 FastEthernet interfaces
> 1 Channelized E1/PRI port
> DRAM configuration is 64 bits wide with parity enabled.
> 239K bytes of non-volatile configuration memory.
> 62720K bytes of ATA CompactFlash (Read/Write)
>
> Configuration register is 0x2102
>
>
> Can sombody please help me??
>
> Michael from Denmark
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>

[ Post a follow-up to this message ]

I've been successful setting up MeetMe on a 2811 running CCME 4.1 running I=
OS 12.4(15)T1.  This example MeetMe is set for a single, 24 party conferenc=
e:

---------------------------------------------

voice class custom-cptone jointone
dualtone conference
frequency 1200 1200
cadence 150 50 150 50
!
!
voice class custom-cptone leavetone
dualtone conference
frequency 900 900
cadence 150 50 150 50



voice-card 0
dspfarm
dsp services dspfarm
!
!
sccp local FastEthernet0/0.8
sccp ccm 172.16.128.8 identifier 1 priority 1 version 4.1 =

sccp
!
!
sccp ccm group 1
bind interface FastEthernet0/0.8
associate ccm 1 priority 1
associate profile 1 register mtp123412341234
keepalive retries 5
!
!
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 1
conference-join custom-cptone jointone
conference-leave custom-cptone leavetone
associate application SCCP
!
!
telephony-service
sdspfarm conference mute-on 11 mute-off 12
sdspfarm units 3
sdspfarm tag 2 mtp123412341234
conference hardware
!
!
ephone-dn  60  dual-line
number 1234
conference meetme
no huntstop
!
!
ephone-dn  61  dual-line
number 1234
conference meetme
preference 1
no huntstop
!
!
ephone-dn  62  dual-line
number 1234
conference meetme
preference 2

------------------------------------------

Jack Martin, CCVP
Network Engineer
Tushaus Computer Systems
10400 Innovation Drive, Suite 100
Wauwatosa, WI 53226
Desk: 414.908.2267
Cell: 414.477.6990
Fax: 414.908.4467
jackm@tushaus.com
www.Tushaus.com

-----Original Message-----
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.ne=
ther.net] On Behalf Of ano-1@worldonline.dk
Sent: Friday, November 23, 2007 2:48 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Meet-Me Conference CallManager Express



Hi,

I need help!!

I=B4ve tryed to configure Meet-Me on a ccme, but it will not work!!

Have anybody tryed to configure it?

I=B4ve attatch my config and below is my "show ver"



CCME-lab#show ver
Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4(15)T1=
, =

RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Wed 18-Jul-07 06:22 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)

CCME-lab uptime is 17 hours, 58 minutes
System returned to ROM by reload at 15:45:31 CUT Thu Nov 22 2007
System restarted at 15:46:53 CUT Thu Nov 22 2007
System image file is "flash:c2800nm-ipvoicek9-mz.124-15.T1.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing cisco cryptographic products may be found =
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FCZ092372QP
11 FastEthernet interfaces
1 Channelized E1/PRI port
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


Can sombody please help me??

Michael from Denmark
 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]

I forgot to include the ephone template:

ephone-template  1
conference drop-mode local
softkeys hold  Resume Newcall Select Join
softkeys idle  Redial Newcall Cfwdall Join Pickup Dnd
softkeys seized  Endcall Redial Cfwdall Meetme Pickup Callback
softkeys alerting  Endcall Callback
softkeys connected  Hold Endcall Park Confrn Trnsfer Select Join ConfList =
RmLstC Flash

Jack Martin, CCVP
Network Engineer
Tushaus Computer Systems
10400 Innovation Drive, Suite 100
Wauwatosa, WI 53226
Desk: 414.908.2267
Cell: 414.477.6990
Fax: 414.908.4467
jackm@tushaus.com
www.Tushaus.com


-----Original Message-----
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.ne=
ther.net] On Behalf Of ano-1@worldonline.dk
Sent: Friday, November 23, 2007 2:48 AM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] Meet-Me Conference CallManager Express



Hi,

I need help!!

I=B4ve tryed to configure Meet-Me on a ccme, but it will not work!!

Have anybody tryed to configure it?

I=B4ve attatch my config and below is my "show ver"



CCME-lab#show ver
Cisco IOS Software, 2800 Software (C2800NM-IPVOICEK9-M), Version 12.4(15)T1=
, =

RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Wed 18-Jul-07 06:22 by prod_rel_team

ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)

CCME-lab uptime is 17 hours, 58 minutes
System returned to ROM by reload at 15:45:31 CUT Thu Nov 22 2007
System restarted at 15:46:53 CUT Thu Nov 22 2007
System image file is "flash:c2800nm-ipvoicek9-mz.124-15.T1.bin"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing cisco cryptographic products may be found =
at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
Processor board ID FCZ092372QP
11 FastEthernet interfaces
1 Channelized E1/PRI port
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62720K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102


Can sombody please help me??

Michael from Denmark
 ________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]