 |
|
 |
|
|
 |
CME map incoming pri to ip phones |
 |
 |
|
|
12-18-07 06:12 AM
Hello, I have setup CME and have 4 - 7960 ip phones with extension
2001-2004.
I have a PRI connected to a PRI Simulator to some pstn ports. Outbound dial
works fine, however how do I
map the incoming pri numbers 4071111101-4071111104 to the ip phone
extensions 2001-2004?
TIA
[ Post a follow-up to this message ]
|
|
|
 |
|
 |
|
 |
|
|
|
Re: CME map incoming pri to ip phones |
|
|
|
|
12-18-07 06:12 PM
You need to set up translation rules:
http://www.cisco.com/en/US/tech/tk6...ech_note09186a0
080325e8e.shtml
Jack Martin, CCVP
Network Engineer
Tushaus Computer Services
10400 Innovation Drive, Ste 100
Milwaukee, WI 53226
414.908.2222 Helpdesk
414.908.2267 Work
414.908.4467 Fax
414.477.6990 Cell
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of cisco.voip
Sent: Monday, December 17, 2007 11:12 PM
To: cisco-voip@puck.nether.net
Subject: [cisco-voip] CME map incoming pri to ip phones
Hello, I have setup CME and have 4 - 7960 ip phones with extension
2001-2004.
I have a PRI connected to a PRI Simulator to some pstn ports. Outbound
dial
works fine, however how do I
map the incoming pri numbers 4071111101-4071111104 to the ip phone
extensions 2001-2004?
TIA
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CME map incoming pri to ip phones |
|
|
|
|
12-18-07 06:12 PM
Easier way, use num-exp...
So, do this:
num-exp 4071111101 2001
num-exp 4071111102 2002
etc....
Jonathan
On Dec 17, 2007 11:11 PM, cisco.voip <cisco.voip@verizon.net> wrote:
> Hello, I have setup CME and have 4 - 7960 ip phones with extension
> 2001-2004.
> I have a PRI connected to a PRI Simulator to some pstn ports. Outbound di
al
> works fine, however how do I
> map the incoming pri numbers 4071111101-4071111104 to the ip phone
> extensions 2001-2004?
>
> TIA
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CME map incoming pri to ip phones |
|
|
|
|
12-18-07 06:12 PM
I would add one note to that..
And I use num-exp too...
If you use 4 digits on both sides-- it makes the changes for ALL calls.
IE say you have an ext 4500 via an h.323 dial peer..
And you have a DID incoming as 4500 to translate to 2333.
ALL calls to 4500 become 2333...
I had to t/s a customer modification that did this..
And it was one of 90 num-exp in the system- I think my eyes were too tired t
o see it at first..
With a translation profile-- you can direct it based on the incoming dial-pe
er.
Think of num-exp as the 20 ld sledge hammer and translation profiles as the
15 oz finishing hammer....
Later,
Jim
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck
.nether.net] On Behalf Of Jonathan Charles
Sent: Tuesday, December 18, 2007 10:47 AM
To: cisco.voip
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CME map incoming pri to ip phones
Easier way, use num-exp...
So, do this:
num-exp 4071111101 2001
num-exp 4071111102 2002
etc....
Jonathan
On Dec 17, 2007 11:11 PM, cisco.voip <cisco.voip@verizon.net> wrote:
> Hello, I have setup CME and have 4 - 7960 ip phones with extension
> 2001-2004.
> I have a PRI connected to a PRI Simulator to some pstn ports. Outbound di
al
> works fine, however how do I
> map the incoming pri numbers 4071111101-4071111104 to the ip phone
> extensions 2001-2004?
>
> TIA
>
>
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CME map incoming pri to ip phones |
|
|
|
|
12-19-07 12:11 AM
90, that's it?
We have a cust where we have to do almost 200 per site...
Jonathan
On Dec 18, 2007 10:47 AM, Jim McBurnett <jim@tgasolutions.com> wrote:
> I would add one note to that..
> And I use num-exp too...
>
> If you use 4 digits on both sides-- it makes the changes for ALL calls.
> IE say you have an ext 4500 via an h.323 dial peer..
> And you have a DID incoming as 4500 to translate to 2333.
> ALL calls to 4500 become 2333...
> I had to t/s a customer modification that did this..
> And it was one of 90 num-exp in the system- I think my eyes were too tired
to see it at first..
>
> With a translation profile-- you can direct it based on the incoming dial-
peer.
>
> Think of num-exp as the 20 ld sledge hammer and translation profiles as th
e 15 oz finishing hammer....
>
>
> Later,
> Jim
>
>
>
> -----Original Message-----
> From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@pu
ck.nether.net] On Behalf Of Jonathan Charles
> Sent: Tuesday, December 18, 2007 10:47 AM
> To: cisco.voip
> Cc: cisco-voip@puck.nether.net
> Subject: Re: [cisco-voip] CME map incoming pri to ip phones
>
> Easier way, use num-exp...
>
> So, do this:
>
> num-exp 4071111101 2001
> num-exp 4071111102 2002
>
> etc....
>
>
>
> Jonathan
>
> On Dec 17, 2007 11:11 PM, cisco.voip <cisco.voip@verizon.net> wrote:
> ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Re: CME map incoming pri to ip phones |
|
|
|
|
12-19-07 06:12 AM
I used the num-exp, however, when I call in from pstn side, I get a dialtone
from which I dial 2001 and ring the ip phone.
Why does the router provide this dial tone?
----- Original Message -----
From: "Jonathan Charles" <jonvoip@gmail.com>
To: "Jim McBurnett" <jim@tgasolutions.com>
Cc: "cisco. voip" <cisco.voip@verizon.net>; <cisco-voip@puck.nether.net>
Sent: Tuesday, December 18, 2007 3:33 PM
Subject: Re: [cisco-voip] CME map incoming pri to ip phones
> 90, that's it?
>
> We have a cust where we have to do almost 200 per site...
>
>
> Jonathan
>
> On Dec 18, 2007 10:47 AM, Jim McBurnett <jim@tgasolutions.com> wrote:
>
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
Re: CME map incoming pri to ip phones |
|
|
|
|
|
|
|
|
|
|
Re: CME map incoming pri to ip phones |
|
|
|
|
12-19-07 06:12 AM
Excellent, thanks, I had to enter the command under the pots dial peer.
----- Original Message -----
From: Wes Sisk
To: cisco.voip
Cc: Jonathan Charles ; Jim McBurnett ; cisco-voip@puck.nether.net
Sent: Tuesday, December 18, 2007 10:31 PM
Subject: Re: [cisco-voip] CME map incoming pri to ip phones
add 'direct-inward-dial' under your d-ch serial interface:
int s1/0:23
direct-inward-dial
/Wes
cisco.voip wrote:
I used the num-exp, however, when I call in from pstn side, I get a dialtone
from which I dial 2001 and ring the ip phone.
Why does the router provide this dial tone?
----- Original Message -----
From: "Jonathan Charles" <jonvoip@gmail.com>
To: "Jim McBurnett" <jim@tgasolutions.com>
Cc: "cisco. voip" <cisco.voip@verizon.net>; <cisco-voip@puck.nether.net>
Sent: Tuesday, December 18, 2007 3:33 PM
Subject: Re: [cisco-voip] CME map incoming pri to ip phones
90, that's it?
We have a cust where we have to do almost 200 per site...
Jonathan
On Dec 18, 2007 10:47 AM, Jim McBurnett <jim@tgasolutions.com> wrote:
I would add one note to that..
And I use num-exp too...
If you use 4 digits on both sides-- it makes the changes for ALL calls.
IE say you have an ext 4500 via an h.323 dial peer..
And you have a DID incoming as 4500 to translate to 2333.
ALL calls to 4500 become 2333...
I had to t/s a customer modification that did this..
And it was one of 90 num-exp in the system- I think my eyes were too
tired to see it at first..
With a translation profile-- you can direct it based on the incoming
dial-peer.
Think of num-exp as the 20 ld sledge hammer and translation profiles as
the 15 oz finishing hammer....
Later,
Jim
-----Original Message-----
From: cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jonathan Charle
s
Sent: Tuesday, December 18, 2007 10:47 AM
To: cisco.voip
Cc: cisco-voip@puck.nether.net
Subject: Re: [cisco-voip] CME map incoming pri to ip phones
Easier way, use num-exp...
So, do this:
num-exp 4071111101 2001
num-exp 4071111102 2002
etc....
Jonathan
On Dec 17, 2007 11:11 PM, cisco.voip <cisco.voip@verizon.net> wrote:
Hello, I have setup CME and have 4 - 7960 ip phones with extension
2001-2004.
I have a PRI connected to a PRI Simulator to some pstn ports. Outbound
dial
works fine, however how do I
map the incoming pri numbers 4071111101-4071111104 to the ip phone
extensions 2001-2004?
TIA
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
________________________________________
_______
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
[ Post a follow-up to this message ]
|
|
|
|
|
|
|
|
|
|
|
Sponsored Links |
|
|
|
|
 |
All times are GMT. The time now is 06:38 PM. |
 |
|
|
 |
|
 |
|
|
 |
|
Forum Rules:
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
|
HTML code is OFF
vB code is ON
Smilies are ON
[IMG] code is OFF
|
|
|
|
Medical and Health forum | Computer Games Reviews | Graphics design forum
|
 |
|
 |
|
