Need to involve the telco.  Unless the lines are provisioned as DID
trunks (which they aren't) they are not going to pass you any DNIS
information down the line, one to one correlation between physical port
and the respective phone number.

-matt

Paul Choi wrote:
> Is it possible to use hunt groups for the purpose of having inbound calls 
hunt from port to port?
>
> I have a 3725 box with eight FXO trunks. What if I have trunks with 4100, 4101, 41
...07 and would like for the lines to hunt from 4100 to 4101 if 4100 is occupied et
c. Must I involve the telco to setup the hunt groups at the CO or is there a way of 
for
cing these trunks to hunt within the router?
>
> Paul
>
>
>
>
>        ________________________________________
____________________________
________________
> Never miss a thing.  Make Yahoo your home page.
> http://www.yahoo.com/r/hs
>  ________________________________________
_______
> cisco-voip mailing list
> cisco-voip@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip

[ Post a follow-up to this message ]